diff --git a/MAINTAINERS b/MAINTAINERS
index 7b1d2201bf..225012025c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -612,6 +612,7 @@ F:	doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
 F:	doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml
 F:	doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml
 F:	drivers/clk/adi/
+F:	drivers/gpio/adp5588_gpio.c
 F:	drivers/gpio/gpio-adi-adsp.c
 F:	drivers/pinctrl/pinctrl-adi-adsp.c
 F:	drivers/serial/serial_adi_uart4.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 032be1d460..9832aa8b96 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -531,6 +531,14 @@ config DM_PCA953X
 	  Now, max 24 bits chips and PCA953X compatible chips are
 	  supported
 
+config ADP5588_GPIO
+	bool "ADP5588 GPIO expander driver"
+	depends on DM_GPIO && DM_I2C
+	help
+	  Say yes here to support GPIO functionality of ADI ADP5588 chips.
+
+	  The ADP5588 is an 18-port I2C GPIO expander and keypad controller.
+
 config SPL_DM_PCA953X
 	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
 	depends on SPL_DM_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ba58fbafd1..f3935638f9 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_NOMADIK_GPIO)	+= nmk_gpio.o
 obj-$(CONFIG_MAX7320_GPIO)	+= max7320_gpio.o
 obj-$(CONFIG_$(SPL_)MAX77663_GPIO)	+= max77663_gpio.o
 obj-$(CONFIG_SL28CPLD_GPIO)	+= sl28cpld-gpio.o
+obj-$(CONFIG_ADP5588_GPIO)	+= adp5588_gpio.o
 obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN)	+= zynqmp_gpio_modepin.o
 obj-$(CONFIG_SLG7XL45106_I2C_GPO)	+= gpio_slg7xl45106.o
 obj-$(CONFIG_FTGPIO010)		+= ftgpio010.o
diff --git a/drivers/gpio/adp5588_gpio.c b/drivers/gpio/adp5588_gpio.c
new file mode 100644
index 0000000000..d081e16989
--- /dev/null
+++ b/drivers/gpio/adp5588_gpio.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GPIO Chip driver for Analog Devices
+ * ADP5588/ADP5587 I/O Expander and QWERTY Keypad Controller
+ *
+ * (C) Copyright 2022 - Analog Devices, Inc.
+ *
+ * Written and/or maintained by Timesys Corporation
+ *
+ * Contact: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
+ * Contact: Greg Malysa <greg.malysa@timesys.com>
+ *
+ * Based on Michael Hennerich's Linux driver:
+ * Michael Hennerich <michael.hennerich@analog.com>
+ *
+ */
+
+#include <dm.h>
+#include <i2c.h>
+#include <asm-generic/gpio.h>
+
+#define ADP5588_MAXGPIO     18
+#define ADP5588_BANK(offs)  ((offs) >> 3)
+#define ADP5588_BIT(offs)   (1u << ((offs) & 0x7))
+
+#define DEV_ID          0x00    /* Device ID */
+#define GPIO_DAT_STAT1  0x14    /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT2  0x15    /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT3  0x16    /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_OUT1   0x17    /* GPIO DATA OUT */
+#define GPIO_DAT_OUT2   0x18    /* GPIO DATA OUT */
+#define GPIO_DAT_OUT3   0x19    /* GPIO DATA OUT */
+#define GPIO_INT_EN1    0x1A    /* GPIO Interrupt Enable */
+#define GPIO_INT_EN2    0x1B    /* GPIO Interrupt Enable */
+#define GPIO_INT_EN3    0x1C    /* GPIO Interrupt Enable */
+#define KP_GPIO1        0x1D    /* Keypad or GPIO Selection */
+#define KP_GPIO2        0x1E    /* Keypad or GPIO Selection */
+#define KP_GPIO3        0x1F    /* Keypad or GPIO Selection */
+#define GPIO_DIR1       0x23    /* GPIO Data Direction */
+#define GPIO_DIR2       0x24    /* GPIO Data Direction */
+#define GPIO_DIR3       0x25	/* GPIO Data Direction */
+#define GPIO_PULL1      0x2C    /* GPIO Pull Disable */
+#define GPIO_PULL2      0x2D    /* GPIO Pull Disable */
+#define GPIO_PULL3      0x2E    /* GPIO Pull Disable */
+#define ID_MASK	        0x0F
+
+struct adp5588_gpio {
+	u8 dat_out[3];
+	u8 dir[3];
+};
+
+static int adp5588_gpio_read(struct udevice *dev, u8 reg)
+{
+	int ret;
+	u8 val;
+
+	ret = dm_i2c_read(dev, reg, &val, 1);
+
+	if (ret < 0) {
+		pr_err("%s: read error\n", __func__);
+		return ret;
+	}
+
+	return val;
+}
+
+static int adp5588_gpio_write(struct udevice *dev, u8 reg, u8 val)
+{
+	int ret;
+
+	ret = dm_i2c_write(dev, reg, &val, 1);
+	if (ret < 0) {
+		pr_err("%s: write error\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adp5588_get_value(struct udevice *dev, u32 offset)
+{
+	struct adp5588_gpio *plat = dev_get_plat(dev);
+	unsigned int bank = ADP5588_BANK(offset);
+	unsigned int bit = ADP5588_BIT(offset);
+	int val;
+
+	if (plat->dir[bank] & bit)
+		val = plat->dat_out[bank];
+	else
+		val = adp5588_gpio_read(dev, GPIO_DAT_STAT1 + bank);
+
+	return !!(val & bit);
+}
+
+static int adp5588_set_value(struct udevice *dev, u32 offset,
+			     int32_t value)
+{
+	unsigned int bank, bit;
+	int ret;
+	struct adp5588_gpio *plat = dev_get_plat(dev);
+
+	bank = ADP5588_BANK(offset);
+	bit = ADP5588_BIT(offset);
+
+	if (value)
+		plat->dat_out[bank] |= bit;
+	else
+		plat->dat_out[bank] &= ~bit;
+
+	ret = adp5588_gpio_write(dev, GPIO_DAT_OUT1 + bank,
+				 plat->dat_out[bank]);
+
+	return ret;
+}
+
+static int adp5588_direction_input(struct udevice *dev, u32 offset)
+{
+	int ret;
+	unsigned int bank;
+	struct adp5588_gpio *plat = dev_get_plat(dev);
+
+	bank = ADP5588_BANK(offset);
+
+	plat->dir[bank] &= ~ADP5588_BIT(offset);
+	ret = adp5588_gpio_write(dev, GPIO_DIR1 + bank, plat->dir[bank]);
+
+	return ret;
+}
+
+static int adp5588_direction_output(struct udevice *dev,
+				    u32 offset, int value)
+{
+	int ret;
+	unsigned int bank, bit;
+	struct adp5588_gpio *plat = dev_get_plat(dev);
+
+	bank = ADP5588_BANK(offset);
+	bit = ADP5588_BIT(offset);
+
+	plat->dir[bank] |= bit;
+
+	if (value)
+		plat->dat_out[bank] |= bit;
+	else
+		plat->dat_out[bank] &= ~bit;
+
+	ret = adp5588_gpio_write(dev, GPIO_DAT_OUT1 + bank,
+				 plat->dat_out[bank]);
+	ret |= adp5588_gpio_write(dev, GPIO_DIR1 + bank,
+				 plat->dir[bank]);
+
+	return ret;
+}
+
+static int adp5588_ofdata_platdata(struct udevice *dev)
+{
+	struct adp5588_gpio *plat = dev_get_plat(dev);
+	struct gpio_dev_priv *priv = dev_get_uclass_priv(dev);
+	int node = dev_of_offset(dev);
+	int ret, i, revid;
+
+	priv->gpio_count = ADP5588_MAXGPIO;
+	priv->bank_name = fdt_get_name(gd->fdt_blob, node, NULL);
+
+	ret = adp5588_gpio_read(dev, DEV_ID);
+	if (ret < 0)
+		return ret;
+
+	revid = ret & ID_MASK;
+
+	printf("ADP5588 Detected: Rev %x, Rev ID %x\n", ret, revid);
+
+	for (i = 0, ret = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
+		plat->dat_out[i] = adp5588_gpio_read(dev, GPIO_DAT_OUT1 + i);
+		plat->dir[i] = adp5588_gpio_read(dev, GPIO_DIR1 + i);
+		ret |= adp5588_gpio_write(dev, KP_GPIO1 + i, 0);
+		ret |= adp5588_gpio_write(dev, GPIO_PULL1 + i, 0);
+		ret |= adp5588_gpio_write(dev, GPIO_INT_EN1 + i, 0);
+		if (ret) {
+			pr_err("%s: Initialization error\n", __func__);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct dm_gpio_ops adp5588_ops = {
+	.direction_input  = adp5588_direction_input,
+	.direction_output = adp5588_direction_output,
+	.get_value		  = adp5588_get_value,
+	.set_value		  = adp5588_set_value,
+};
+
+static const struct udevice_id adp5588_of_match_list[] = {
+	{ .compatible = "adi,adp5588"},
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(gpio_adp5588) = {
+	.name					  = "gpio_adp5588",
+	.id						  = UCLASS_GPIO,
+	.ops					  = &adp5588_ops,
+	.of_match				  = adp5588_of_match_list,
+	.of_to_plat		  = adp5588_ofdata_platdata,
+	.plat_auto = sizeof(struct adp5588_gpio),
+	.flags					  = DM_FLAG_PRE_RELOC,
+};
