diff mbox series

[07/19] drivers: mtd: nand: cadence: Add support for NAND_CMD_PARAM

Message ID 20240919035512.13854-8-dinesh.maniyam@intel.com
State New
Delegated to: Dario Binacchi
Headers show
Series Add Cadence NAND Driver support | expand

Commit Message

Maniyam, Dinesh Sept. 19, 2024, 3:55 a.m. UTC 
From: Dinesh Maniyam <dinesh.maniyam@intel.com>

This patch is to add support for reading param page of NAND device.
These paramaters are unique and used for identification purpose.

Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
---
 drivers/mtd/nand/raw/cadence_nand.c | 30 +++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/cadence_nand.c b/drivers/mtd/nand/raw/cadence_nand.c
index 55fd3dfdb3..1b5cda1955 100644
--- a/drivers/mtd/nand/raw/cadence_nand.c
+++ b/drivers/mtd/nand/raw/cadence_nand.c
@@ -1940,6 +1940,31 @@  static int cadence_nand_readid(struct mtd_info *mtd, int offset_in_page, unsigne
 	return 0;
 }
 
+static int cadence_nand_param(struct mtd_info *mtd, u8 offset_in_page, unsigned int command)
+{
+	struct cadence_nand_info *cadence = mtd_to_cadence(mtd);
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	int ret = 0;
+
+	ret = cadence_nand_cmd_opcode(cadence, command);
+	if (ret)
+		return ret;
+
+	ret = cadence_nand_cmd_address(cadence, ONE_CYCLE, &offset_in_page);
+	if (ret)
+		return ret;
+
+	ret = cadence_nand_waitfunc(mtd, chip);
+	if (ret)
+		return ret;
+
+	ret = cadence_nand_cmd_data(cadence, sizeof(struct nand_jedec_params), GCMD_DIR_READ);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static void cadence_nand_cmdfunc(struct mtd_info *mtd, unsigned int command,
 				 int offset_in_page, int page)
 {
@@ -1956,6 +1981,9 @@  static void cadence_nand_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		ret = cadence_nand_readid(mtd, offset_in_page, command);
 		break;
 
+	case NAND_CMD_PARAM:
+		ret = cadence_nand_param(mtd, offset_in_page, command);
+		break;
 	/*
 	 * ecc will override other command for read, write and erase
 	 */
@@ -1988,6 +2016,8 @@  static u8 cadence_nand_read_byte(struct mtd_info *mtd)
 	if (cadence->buf_index == 0) {
 		if (cadence->cmd == NAND_CMD_READID)
 			size = 8;
+		else if (cadence->cmd == NAND_CMD_PARAM)
+			size = sizeof(struct nand_jedec_params);
 
 		cadence_nand_read_buf(mtd, &cadence->buf[0], size);
 	}