@@ -32,6 +32,7 @@
#include <linux/bug.h>
#include <linux/mtd/spinand.h>
#include <linux/printk.h>
+#include <linux/delay.h>
#endif
struct spinand_plat {
@@ -362,21 +363,29 @@ static int spinand_erase_op(struct spinand_device *spinand,
return spi_mem_exec_op(spinand->slave, &op);
}
-static int spinand_wait(struct spinand_device *spinand, u8 *s)
+static int spinand_wait(struct spinand_device *spinand,
+ unsigned long initial_delay_us,
+ unsigned long poll_delay_us,
+ u8 *s)
{
unsigned long start, stop;
u8 status;
int ret;
+ udelay(initial_delay_us);
start = get_timer(0);
- stop = 400;
+ stop = SPINAND_WAITRDY_TIMEOUT_MS;
do {
+ schedule();
+
ret = spinand_read_status(spinand, &status);
if (ret)
return ret;
if (!(status & STATUS_BUSY))
goto out;
+
+ udelay(poll_delay_us);
} while (get_timer(start) < stop);
/*
@@ -418,7 +427,10 @@ static int spinand_reset_op(struct spinand_device *spinand)
if (ret)
return ret;
- return spinand_wait(spinand, NULL);
+ return spinand_wait(spinand,
+ SPINAND_RESET_INITIAL_DELAY_US,
+ SPINAND_RESET_POLL_DELAY_US,
+ NULL);
}
static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
@@ -466,7 +478,10 @@ static int spinand_read_page(struct spinand_device *spinand,
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_READ_INITIAL_DELAY_US,
+ SPINAND_READ_POLL_DELAY_US,
+ &status);
if (ret < 0)
return ret;
@@ -498,9 +513,12 @@ static int spinand_write_page(struct spinand_device *spinand,
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_WRITE_INITIAL_DELAY_US,
+ SPINAND_WRITE_POLL_DELAY_US,
+ &status);
if (!ret && (status & STATUS_PROG_FAILED))
- ret = -EIO;
+ return -EIO;
return ret;
}
@@ -702,7 +720,10 @@ static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_ERASE_INITIAL_DELAY_US,
+ SPINAND_ERASE_POLL_DELAY_US,
+ &status);
if (!ret && (status & STATUS_ERASE_FAILED))
ret = -EIO;
@@ -176,6 +176,28 @@ struct spinand_op;
struct spinand_device;
#define SPINAND_MAX_ID_LEN 4
+/*
+ * For erase, write and read operation, we got the following timings :
+ * tBERS (erase) 1ms to 4ms
+ * tPROG 300us to 400us
+ * tREAD 25us to 100us
+ * In order to minimize latency, the min value is divided by 4 for the
+ * initial delay, and dividing by 20 for the poll delay.
+ * For reset, 5us/10us/500us if the device is respectively
+ * reading/programming/erasing when the RESET occurs. Since we always
+ * issue a RESET when the device is IDLE, 5us is selected for both initial
+ * and poll delay.
+ */
+#define SPINAND_READ_INITIAL_DELAY_US 6
+#define SPINAND_READ_POLL_DELAY_US 5
+#define SPINAND_RESET_INITIAL_DELAY_US 5
+#define SPINAND_RESET_POLL_DELAY_US 5
+#define SPINAND_WRITE_INITIAL_DELAY_US 75
+#define SPINAND_WRITE_POLL_DELAY_US 15
+#define SPINAND_ERASE_INITIAL_DELAY_US 250
+#define SPINAND_ERASE_POLL_DELAY_US 50
+
+#define SPINAND_WAITRDY_TIMEOUT_MS 400
/**
* struct spinand_id - SPI NAND id structure
also call schedule() to allow periodic actions Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> --- drivers/mtd/nand/spi/core.c | 35 ++++++++++++++++++++++++++++------- include/linux/mtd/spinand.h | 22 ++++++++++++++++++++++ 2 files changed, 50 insertions(+), 7 deletions(-)