diff mbox series

[1/4] board/qualcomm: introduce phone config

Message ID 20240831-qcom-phones-v1-1-08614edd8e35@linaro.org
State New
Delegated to: Caleb Connolly
Headers show
Series Qualcomm smartphone support | expand

Commit Message

Caleb Connolly Aug. 31, 2024, 4:48 p.m. UTC 
Phones don't have keyboards! Introduce a phone-specific config fragment
and associated environment file to make U-Boot more useful on these
devices. This allows for navigating via the buttons and enabling
various USB gadget modes or displaying info about U-Boot.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 board/qualcomm/qcom-phone.config | 12 ++++++++++
 board/qualcomm/qcom-phone.env    | 49 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)
diff mbox series

Patch

diff --git a/board/qualcomm/qcom-phone.config b/board/qualcomm/qcom-phone.config
new file mode 100644
index 000000000000..4639e19a3df2
--- /dev/null
+++ b/board/qualcomm/qcom-phone.config
@@ -0,0 +1,12 @@ 
+# Settings for phones
+CONFIG_USE_DEFAULT_ENV_FILE=y
+CONFIG_DEFAULT_ENV_FILE="board/qualcomm/qcom-phone.env"
+CONFIG_PANIC_HANG=y
+CONFIG_CMD_PAUSE=y
+CONFIG_BOOTSTD=y
+CONFIG_BOOT_RETRY=y
+CONFIG_BOOT_RETRY_TIME=1
+CONFIG_REMAP_PHONE_KEYS=y
+
+# Many phones don't actually define a serial port in their DTS
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
diff --git a/board/qualcomm/qcom-phone.env b/board/qualcomm/qcom-phone.env
new file mode 100644
index 000000000000..2a0791c888c6
--- /dev/null
+++ b/board/qualcomm/qcom-phone.env
@@ -0,0 +1,49 @@ 
+bootdelay=0
+bootretry=1
+stdin=serial,button-kbd
+stdout=serial,vidconsole
+stderr=serial,vidconsole
+
+# Fastboot is keen to use the address from kconfig, but we
+# allocate its buffer at runtime.
+fastboot=fastboot -l $fastboot_addr_r usb 0
+
+# Shortcut to enable USB serial gadget and disable bootretry
+serial_gadget=setenv stdin serial,button-kbd,usbacm; \
+	setenv stdout serial,vidconsole,usbacm; \
+	setenv stderr serial,vidconsole,usbacm; \
+	setenv bootretry -1; \
+	echo Enabled U-Boot console serial gadget
+
+# bootretry will run this command over and over, if we fail once
+# then bail out to the boot menu instead (with a pause to read
+# the error message)
+bootcmd=bootefi bootmgr; pause; run menucmd
+
+# When entering the menu (either from button press or failed boot)
+# remap bootcmd so it will re-open the menu and we won't get stuck
+# at the console with no way to type
+menucmd=setenv bootcmd run menucmd; bootmenu -1
+
+# Pause is used so the output can be read on the display
+bootmenu_0=Boot=bootefi bootmgr; pause
+bootmenu_1=Enable serial console gadget=run serial_gadget
+bootmenu_2=Enable USB mass storage=ums 0 scsi 0
+bootmenu_3=Reset device=reset
+bootmenu_4=Dump clocks=clk dump; pause
+bootmenu_5=Dump environment=printenv; pause
+bootmenu_6=Board info=bdinfo; pause
+bootmenu_7=Dump bootargs=fdt print /chosen bootargs; pause
+bootmenu_8=Enable fastboot mode=run fastboot
+# Disabling bootretry means we'll just drop the shell
+bootmenu_9=Drop to shell=setenv bootretry -1
+
+# Allow holding the power button while U-Boot loads to enter
+# the boot menu
+button_cmd_0_name=pwrkey
+button_cmd_0=run menucmd
+
+# Hold volume down to drop to a shell with the USB serial gadget
+# enabled for debugging
+button_cmd_1_name=Volume down
+button_cmd_1=run serial_gadget