diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 45d63c6d6dbf..0d2c0ac225c5 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -85,7 +85,15 @@ config CLK_QCOM_SM8650
 	  Say Y here to enable support for the Global Clock Controller
 	  on the Snapdragon SM8650 SoC. This driver supports the clocks
 	  and resets exposed by the GCC hardware block.
 
+config CLK_QCOM_SC7280
+	bool "Qualcomm SC7280 GCC"
+	select CLK_QCOM
+	help
+	  Say Y here to enable support for the Global Clock Controller
+	  on the Snapdragon SC7280 SoC. This driver supports the clocks
+	  and resets exposed by the GCC hardware block.
+
 endmenu
 
 endif
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index dec20e4b5943..e223c131ee4d 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -8,8 +8,9 @@ obj-$(CONFIG_CLK_QCOM_APQ8016) += clock-apq8016.o
 obj-$(CONFIG_CLK_QCOM_APQ8096) += clock-apq8096.o
 obj-$(CONFIG_CLK_QCOM_IPQ4019) += clock-ipq4019.o
 obj-$(CONFIG_CLK_QCOM_QCM2290) += clock-qcm2290.o
 obj-$(CONFIG_CLK_QCOM_QCS404) += clock-qcs404.o
+obj-$(CONFIG_CLK_QCOM_SC7280) += clock-sc7280.o
 obj-$(CONFIG_CLK_QCOM_SM6115) += clock-sm6115.o
 obj-$(CONFIG_CLK_QCOM_SM8250) += clock-sm8250.o
 obj-$(CONFIG_CLK_QCOM_SM8550) += clock-sm8550.o
 obj-$(CONFIG_CLK_QCOM_SM8650) += clock-sm8650.o
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index f6445c8f566f..7aa6ca59aad5 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -10,8 +10,9 @@
 #define CFG_CLK_SRC_CXO   (0 << 8)
 #define CFG_CLK_SRC_GPLL0 (1 << 8)
 #define CFG_CLK_SRC_GPLL0_AUX2 (2 << 8)
 #define CFG_CLK_SRC_GPLL9 (2 << 8)
+#define CFG_CLK_SRC_GPLL0_ODD (3 << 8)
 #define CFG_CLK_SRC_GPLL6 (4 << 8)
 #define CFG_CLK_SRC_GPLL7 (3 << 8)
 #define CFG_CLK_SRC_GPLL4 (5 << 8)
 #define CFG_CLK_SRC_GPLL0_EVEN (6 << 8)
diff --git a/drivers/clk/qcom/clock-sc7280.c b/drivers/clk/qcom/clock-sc7280.c
new file mode 100644
index 000000000000..5d343f120519
--- /dev/null
+++ b/drivers/clk/qcom/clock-sc7280.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clock drivers for Qualcomm sc7280
+ *
+ * (C) Copyright 2024 Linaro Ltd.
+ */
+
+#include <linux/types.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/bug.h>
+#include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+
+#include "clock-qcom.h"
+
+#define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf038
+#define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf020
+
+static ulong sc7280_set_rate(struct clk *clk, ulong rate)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	if (clk->id < priv->data->num_clks)
+		debug("%s: %s, requested rate=%ld\n", __func__, priv->data->clks[clk->id].name, rate);
+
+	switch (clk->id) {
+	case GCC_USB30_PRIM_MOCK_UTMI_CLK:
+		WARN(rate != 19200000, "Unexpected rate for USB30_PRIM_MOCK_UTMI_CLK: %lu\n", rate);
+		clk_rcg_set_rate(priv->base, USB30_PRIM_MASTER_CLK_CMD_RCGR, 0, CFG_CLK_SRC_CXO);
+		return rate;
+	case GCC_USB30_PRIM_MASTER_CLK:
+		WARN(rate != 200000000, "Unexpected rate for USB30_PRIM_MASTER_CLK: %lu\n", rate);
+		clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MASTER_CLK_CMD_RCGR,
+				     1, 0, 0, CFG_CLK_SRC_GPLL0_ODD, 8);
+		clk_rcg_set_rate(priv->base, 0xf064, 0, 0);
+		return rate;
+	default:
+		return 0;
+	}
+}
+
+static const struct gate_clk sc7280_clks[] = {
+	GATE_CLK(GCC_CFG_NOC_USB3_PRIM_AXI_CLK, 0xf07c, 1),
+	GATE_CLK(GCC_USB30_PRIM_MASTER_CLK, 0xf010, 1),
+	GATE_CLK(GCC_AGGRE_USB3_PRIM_AXI_CLK, 0xf080, 1),
+	GATE_CLK(GCC_USB30_PRIM_SLEEP_CLK, 0xf018, 1),
+	GATE_CLK(GCC_USB30_PRIM_MOCK_UTMI_CLK, 0xf01c, 1),
+	GATE_CLK(GCC_USB3_PRIM_PHY_AUX_CLK, 0xf054, 1),
+	GATE_CLK(GCC_USB3_PRIM_PHY_COM_AUX_CLK, 0xf058, 1),
+};
+
+static int sc7280_enable(struct clk *clk)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	if (priv->data->num_clks < clk->id) {
+		debug("%s: unknown clk id %lu\n", __func__, clk->id);
+		return 0;
+	}
+
+	debug("%s: clk %ld: %s\n", __func__, clk->id, sc7280_clks[clk->id].name);
+
+	switch (clk->id) {
+	case GCC_AGGRE_USB3_PRIM_AXI_CLK:
+		qcom_gate_clk_en(priv, GCC_USB30_PRIM_MASTER_CLK);
+		fallthrough;
+	case GCC_USB30_PRIM_MASTER_CLK:
+		qcom_gate_clk_en(priv, GCC_USB3_PRIM_PHY_AUX_CLK);
+		qcom_gate_clk_en(priv, GCC_USB3_PRIM_PHY_COM_AUX_CLK);
+		break;
+	}
+
+	qcom_gate_clk_en(priv, clk->id);
+
+	return 0;
+}
+
+static const struct qcom_reset_map sc7280_gcc_resets[] = {
+	[GCC_PCIE_0_BCR] = { 0x6b000 },
+	[GCC_PCIE_0_PHY_BCR] = { 0x6c01c },
+	[GCC_PCIE_1_BCR] = { 0x8d000 },
+	[GCC_PCIE_1_PHY_BCR] = { 0x8e01c },
+	[GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
+	[GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
+	[GCC_SDCC1_BCR] = { 0x75000 },
+	[GCC_SDCC2_BCR] = { 0x14000 },
+	[GCC_SDCC4_BCR] = { 0x16000 },
+	[GCC_UFS_PHY_BCR] = { 0x77000 },
+	[GCC_USB30_PRIM_BCR] = { 0xf000 },
+	[GCC_USB30_SEC_BCR] = { 0x9e000 },
+	[GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 },
+	[GCC_USB3_PHY_PRIM_BCR] = { 0x50000 },
+	[GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 },
+	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
+};
+
+static const struct qcom_power_map sc7280_gdscs[] = {
+	[GCC_UFS_PHY_GDSC] = { 0x77004 },
+	[GCC_USB30_PRIM_GDSC] = { 0xf004 },
+};
+
+static struct msm_clk_data qcs404_gcc_data = {
+	.resets = sc7280_gcc_resets,
+	.num_resets = ARRAY_SIZE(sc7280_gcc_resets),
+	.clks = sc7280_clks,
+	.num_clks = ARRAY_SIZE(sc7280_clks),
+
+	.power_domains = sc7280_gdscs,
+	.num_power_domains = ARRAY_SIZE(sc7280_gdscs),
+
+	.enable = sc7280_enable,
+	.set_rate = sc7280_set_rate,
+};
+
+static const struct udevice_id gcc_sc7280_of_match[] = {
+	{
+		.compatible = "qcom,gcc-sc7280",
+		.data = (ulong)&qcs404_gcc_data,
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_sc7280) = {
+	.name		= "gcc_sc7280",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_sc7280_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC | DM_FLAG_DEFAULT_PD_CTRL_OFF,
+};
