@@ -30,7 +30,7 @@ ip_dyn=yes
loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
mmcargs=
- setenv bootargs console=${console}
+ setenv bootargs ${mcore_clk} console=${console}
root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
mmcautodetect=yes
mmcboot=
@@ -51,7 +51,7 @@ mmcdev=CONFIG_SYS_MMC_ENV_DEV
mmcpart=1
mmcroot=2
netargs=
- setenv bootargs console=${console} root=/dev/nfs ip=dhcp
+ setenv bootargs ${mcore_clk} console=${console} root=/dev/nfs ip=dhcp
nfsroot=${serverip}:${nfsroot},v3,tcp
netboot=
echo Booting from net ...;
@@ -74,4 +74,5 @@ netboot=
echo WARN: Cannot load the DT;
fi;
nfsroot=/srv/nfs
+prepare_mcore=setenv mcore_clk clk-imx8mp.mcore_booted
sd_dev=1
Added m7 core support in uboot for imx8mp by adding the boot variable prepare_mcore. Based on commit 0ed32cc8568a ("LF-6555 imx8m[m/n/p/q]_evk: add bootargs to support mcore") Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> --- board/phytec/phycore_imx8mp/phycore_imx8mp.env | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)