| Message ID | 20240731090336.1269391-2-jonas@kwiboo.se |
|---|---|
| State | Accepted |
| Commit | 60dc9c894798d617dab86fe76d404424452fa2db |
| Delegated to: | Kever Yang |
| Headers | show |
| Series | board: rockchip: Add Xunlong Orange Pi 3B | expand |
On 2024/7/31 17:03, Jonas Karlman wrote: > The Xunlong Orange Pi 3B is a single-board computer based on the > Rockchip RK3566 SoC. > > Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. > > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> > Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > > [ upstream commit: d79d713d602e8b32cf935ddfdf61769cb74ba1dc ] > > (cherry picked from commit 9defe71f2674f82c27a8d4593d8c5851ab5d51e7) Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > .../rockchip/rk3566-orangepi-3b-v1.1.dts | 29 + > .../rockchip/rk3566-orangepi-3b-v2.1.dts | 70 ++ > .../arm64/rockchip/rk3566-orangepi-3b.dtsi | 678 ++++++++++++++++++ > 3 files changed, 777 insertions(+) > create mode 100644 dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts > create mode 100644 dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts > create mode 100644 dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi > > diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts > new file mode 100644 > index 000000000000..074e93bd4b85 > --- /dev/null > +++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts > @@ -0,0 +1,29 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > + > +#include "rk3566-orangepi-3b.dtsi" > + > +/ { > + model = "Xunlong Orange Pi 3B v1.1"; > + compatible = "xunlong,orangepi-3b-v1.1", "xunlong,orangepi-3b", "rockchip,rk3566"; > +}; > + > +&pmu_io_domains { > + vccio5-supply = <&vcc_3v3>; > +}; > + > +&gmac1 { > + phy-handle = <&rgmii_phy1>; > + status = "okay"; > +}; > + > +&mdio1 { > + rgmii_phy1: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + reset-assert-us = <20000>; > + reset-deassert-us = <50000>; > + reset-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; > + }; > +}; > diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts > new file mode 100644 > index 000000000000..d894bff41e61 > --- /dev/null > +++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts > @@ -0,0 +1,70 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > + > +#include "rk3566-orangepi-3b.dtsi" > + > +/ { > + model = "Xunlong Orange Pi 3B v2.1"; > + compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566"; > + > + vccio_phy1: regulator-1v8-vccio-phy { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_phy1"; > + regulator-always-on; > + regulator-boot-on; > + regulator-max-microvolt = <1800000>; > + regulator-min-microvolt = <1800000>; > + }; > +}; > + > +&pmu_io_domains { > + vccio5-supply = <&vccio_phy1>; > +}; > + > +&gmac1 { > + phy-handle = <&rgmii_phy1>; > + status = "okay"; > +}; > + > +&mdio1 { > + rgmii_phy1: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + reset-assert-us = <20000>; > + reset-deassert-us = <50000>; > + reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&sdmmc1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + brcmf: wifi@1 { > + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; > + reg = <1>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "host-wake"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_wake_host_h>; > + }; > +}; > + > +&uart1 { > + bluetooth { > + compatible = "brcm,bcm4345c5"; > + clocks = <&rk809 1>; > + clock-names = "lpo"; > + interrupt-parent = <&gpio2>; > + interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "host-wakeup"; > + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>; > + vbat-supply = <&vcc_3v3>; > + vddio-supply = <&vcc_1v8>; > + }; > +}; > diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi > new file mode 100644 > index 000000000000..d539570f531e > --- /dev/null > +++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi > @@ -0,0 +1,678 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include <dt-bindings/soc/rockchip,vop2.h> > +#include "rk3566.dtsi" > + > +/ { > + model = "Xunlong Orange Pi 3B"; > + compatible = "xunlong,orangepi-3b", "rockchip,rk3566"; > + > + aliases { > + ethernet0 = &gmac1; > + mmc0 = &sdhci; > + mmc1 = &sdmmc0; > + mmc2 = &sdmmc1; > + }; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + hdmi-con { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&work_led>; > + > + led-0 { > + color = <LED_COLOR_ID_GREEN>; > + default-state = "on"; > + function = LED_FUNCTION_HEARTBEAT; > + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + vcc3v3_pcie30: regulator-3v3-vcc-pcie30 { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie20_pwren>; > + regulator-name = "vcc3v3_pcie30"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + vcc3v3_sys: regulator-3v3-vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_sys: regulator-5v0-vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc5v0_usb_host: regulator-5v0-vcc-usb-host { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_host_pwren_h>; > + regulator-name = "vcc5v0_usb_host"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_otg_pwren_h>; > + regulator-name = "vcc5v0_usb_otg"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk809 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_reg_on_h>; > + post-power-on-delay-ms = <200>; > + power-off-delay-us = <5000000>; > + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,name = "Analog RK809"; > + simple-audio-card,mclk-fs = <256>; > + > + simple-audio-card,cpu { > + sound-dai = <&i2s1_8ch>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&rk809>; > + }; > + }; > +}; > + > +&combphy1 { > + status = "okay"; > +}; > + > +&combphy2 { > + status = "okay"; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&gmac1 { > + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > + clock_in_out = "input"; > + phy-mode = "rgmii-id"; > + phy-supply = <&vcc_3v3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac1m0_miim > + &gmac1m0_tx_bus2 > + &gmac1m0_rx_bus2 > + &gmac1m0_rgmii_clk > + &gmac1m0_rgmii_bus > + &gmac1m0_clkinout>; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&hdmi { > + avdd-0v9-supply = <&vdda0v9_image>; > + avdd-1v8-supply = <&vcca1v8_image>; > + status = "okay"; > +}; > + > +&hdmi_in { > + hdmi_in_vp0: endpoint { > + remote-endpoint = <&vp0_out_hdmi>; > + }; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rk809: pmic@20 { > + compatible = "rockchip,rk809"; > + reg = <0x20>; > + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > + #clock-cells = <1>; > + clocks = <&cru I2S1_MCLKOUT_TX>; > + clock-names = "mclk"; > + clock-output-names = "rk809-clkout1", "rk809-clkout2"; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; > + #sound-dai-cells = <0>; > + system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc3v3_sys>; > + vcc2-supply = <&vcc3v3_sys>; > + vcc3-supply = <&vcc3v3_sys>; > + vcc4-supply = <&vcc3v3_sys>; > + vcc5-supply = <&vcc3v3_sys>; > + vcc6-supply = <&vcc3v3_sys>; > + vcc7-supply = <&vcc3v3_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc3v3_sys>; > + > + regulators { > + vdd_logic: DCDC_REG1 { > + regulator-name = "vdd_logic"; > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: DCDC_REG2 { > + regulator-name = "vdd_gpu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vdd_npu: DCDC_REG4 { > + regulator-name = "vdd_npu"; > + regulator-initial-mode = <0x2>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG5 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_image: LDO_REG1 { > + regulator-name = "vdda0v9_image"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda_0v9: LDO_REG2 { > + regulator-name = "vdda_0v9"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_pmu: LDO_REG3 { > + regulator-name = "vdda0v9_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <900000>; > + }; > + }; > + > + vccio_acodec: LDO_REG4 { > + regulator-name = "vccio_acodec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-name = "vccio_sd"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_pmu: LDO_REG6 { > + regulator-name = "vcc3v3_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcca_1v8: LDO_REG7 { > + regulator-name = "vcca_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca1v8_pmu: LDO_REG8 { > + regulator-name = "vcca1v8_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcca1v8_image: LDO_REG9 { > + regulator-name = "vcca1v8_image"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3: SWITCH_REG1 { > + regulator-name = "vcc_3v3"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_sd: SWITCH_REG2 { > + regulator-name = "vcc3v3_sd"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <830000>; > + regulator-max-microvolt = <1200000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc3v3_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2s0_8ch { > + status = "okay"; > +}; > + > +&i2s1_8ch { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s1m0_sclktx > + &i2s1m0_lrcktx > + &i2s1m0_sdi0 > + &i2s1m0_sdo0>; > + rockchip,trcm-sync-tx-only; > + status = "okay"; > +}; > + > +&pcie2x1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie20_pins>; > + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > + vpcie3v3-supply = <&vcc3v3_pcie30>; > + status = "okay"; > +}; > + > +&pinctrl { > + bluetooth { > + bt_reg_on_h: bt-reg-on-h { > + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_wake_host_h: bt-wake-host-h { > + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + host_wake_bt_h: host-wake-bt-h { > + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + leds { > + work_led: work-led { > + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pcie { > + pcie20_pins: pcie20-pins { > + rockchip,pins = > + <1 RK_PB0 4 &pcfg_pull_none>, > + <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>, > + <1 RK_PB1 4 &pcfg_pull_none>; > + }; > + > + pcie20_pwren: pcie20-pwren { > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb { > + usb_host_pwren_h: usb-host-pwren-h { > + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + usb_otg_pwren_h: usb-otg-pwren-h { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + wifi { > + wifi_reg_on_h: wifi-reg-on-h { > + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + wifi_wake_host_h: wifi-wake-host-h { > + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmuio1-supply = <&vcc3v3_pmu>; > + pmuio2-supply = <&vcc3v3_pmu>; > + vccio1-supply = <&vccio_acodec>; > + vccio2-supply = <&vcc_1v8>; > + vccio3-supply = <&vccio_sd>; > + vccio4-supply = <&vcc_1v8>; > + vccio6-supply = <&vcc_3v3>; > + vccio7-supply = <&vcc_3v3>; > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca_1v8>; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + cap-mmc-highspeed; > + max-frequency = <200000000>; > + mmc-hs200-1_8v; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vcc_1v8>; > + status = "okay"; > +}; > + > +&sdmmc0 { > + bus-width = <4>; > + cap-sd-highspeed; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > + vmmc-supply = <&vcc3v3_sd>; > + vqmmc-supply = <&vccio_sd>; > + status = "okay"; > +}; > + > +&sdmmc1 { > + bus-width = <4>; > + cap-sd-highspeed; > + cap-sdio-irq; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + no-mmc; > + no-sd; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; > + sd-uhs-sdr104; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vcc_1v8>; > + status = "okay"; > +}; > + > +&sfc { > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <104000000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <1>; > + }; > +}; > + > +&tsadc { > + rockchip,hw-tshut-mode = <1>; > + rockchip,hw-tshut-polarity = <0>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host0_xhci { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usb_host1_xhci { > + status = "okay"; > +}; > + > +&usb2phy0 { > + status = "okay"; > +}; > + > +&usb2phy0_host { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&usb2phy0_otg { > + phy-supply = <&vcc5v0_usb_otg>; > + status = "okay"; > +}; > + > +&usb2phy1 { > + status = "okay"; > +}; > + > +&usb2phy1_host { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&usb2phy1_otg { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&vop { > + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > + status = "okay"; > +}; > + > +&vop_mmu { > + status = "okay"; > +}; > + > +&vp0 { > + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > + reg = <ROCKCHIP_VOP2_EP_HDMI0>; > + remote-endpoint = <&hdmi_in_vp0>; > + }; > +};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts new file mode 100644 index 000000000000..074e93bd4b85 --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-orangepi-3b.dtsi" + +/ { + model = "Xunlong Orange Pi 3B v1.1"; + compatible = "xunlong,orangepi-3b-v1.1", "xunlong,orangepi-3b", "rockchip,rk3566"; +}; + +&pmu_io_domains { + vccio5-supply = <&vcc_3v3>; +}; + +&gmac1 { + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts new file mode 100644 index 000000000000..d894bff41e61 --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-orangepi-3b.dtsi" + +/ { + model = "Xunlong Orange Pi 3B v2.1"; + compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566"; + + vccio_phy1: regulator-1v8-vccio-phy { + compatible = "regulator-fixed"; + regulator-name = "vccio_phy1"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + }; +}; + +&pmu_io_domains { + vccio5-supply = <&vccio_phy1>; +}; + +&gmac1 { + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; + }; +}; + +&sdmmc1 { + #address-cells = <1>; + #size-cells = <0>; + + brcmf: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wake_host_h>; + }; +}; + +&uart1 { + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + interrupt-parent = <&gpio2>; + interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>; + vbat-supply = <&vcc_3v3>; + vddio-supply = <&vcc_1v8>; + }; +}; diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi new file mode 100644 index 000000000000..d539570f531e --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi @@ -0,0 +1,678 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "Xunlong Orange Pi 3B"; + compatible = "xunlong,orangepi-3b", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc3v3_pcie30: regulator-3v3-vcc-pcie30 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_pwren>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: regulator-3v3-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb_host: regulator-5v0-vcc-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren_h>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren_h>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + post-power-on-delay-ms = <200>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + clock_in_out = "input"; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_rgmii_bus + &gmac1m0_clkinout>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + clock-output-names = "rk809-clkout1", "rk809-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_pins>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + bluetooth { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_h: bt-wake-host-h { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt_h: host-wake-bt-h { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led: work-led { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20_pins: pcie20-pins { + rockchip,pins = + <1 RK_PB0 4 &pcfg_pull_none>, + <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PB1 4 &pcfg_pull_none>; + }; + + pcie20_pwren: pcie20-pwren { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb_host_pwren_h: usb-host-pwren-h { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwren_h: usb-otg-pwren-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +};