@@ -7,19 +7,22 @@
* Bo Shen <voice.shen@atmel.com>
*/
-#include <linux/bitops.h>
-#include <linux/errno.h>
+#include <clk.h>
+#include <log.h>
+#include <malloc.h>
#include <asm/gpio.h>
#include <asm/hardware.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
#include <linux/list.h>
-#include <linux/printk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/atmel_usba_udc.h>
-#include <malloc.h>
#include "atmel_usba_udc.h"
+static struct usba_udc *controller;
+
static int vbus_is_present(struct usba_udc *udc)
{
/* No Vbus detection: Assume always present */
@@ -506,12 +509,6 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
return 0;
}
-static const struct usb_gadget_ops usba_udc_ops = {
- .get_frame = usba_udc_get_frame,
- .wakeup = usba_udc_wakeup,
- .set_selfpowered = usba_udc_set_selfpowered,
-};
-
static struct usb_endpoint_descriptor usba_ep0_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -1179,28 +1176,16 @@ static int atmel_usba_stop(struct usba_udc *udc)
return 0;
}
-static struct usba_udc controller = {
- .regs = (unsigned *)ATMEL_BASE_UDPHS,
- .fifo = (unsigned *)ATMEL_BASE_UDPHS_FIFO,
- .gadget = {
- .ops = &usba_udc_ops,
- .ep_list = LIST_HEAD_INIT(controller.gadget.ep_list),
- .speed = USB_SPEED_HIGH,
- .is_dualspeed = 1,
- .name = "atmel_usba_udc",
- },
-};
-
int dm_usb_gadget_handle_interrupts(struct udevice *dev)
{
- struct usba_udc *udc = &controller;
+ struct usba_udc *udc = controller;
return usba_udc_irq(udc);
}
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
{
- struct usba_udc *udc = &controller;
+ struct usba_udc *udc = controller;
int ret;
if (!driver || !driver->bind || !driver->setup) {
@@ -1228,7 +1213,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
- struct usba_udc *udc = &controller;
+ struct usba_udc *udc = controller;
if (!driver || !driver->unbind || !driver->disconnect) {
pr_err("bad paramter\n");
@@ -1244,6 +1229,24 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
return 0;
}
+static const struct usb_gadget_ops usba_udc_ops = {
+ .get_frame = usba_udc_get_frame,
+ .wakeup = usba_udc_wakeup,
+ .set_selfpowered = usba_udc_set_selfpowered,
+};
+
+static struct usba_udc udc_controller = {
+ .regs = (unsigned int *)ATMEL_BASE_UDPHS,
+ .fifo = (unsigned int *)ATMEL_BASE_UDPHS_FIFO,
+ .gadget = {
+ .ops = &usba_udc_ops,
+ .ep_list = LIST_HEAD_INIT(udc_controller.gadget.ep_list),
+ .speed = USB_SPEED_HIGH,
+ .is_dualspeed = 1,
+ .name = "atmel_usba_udc",
+ },
+};
+
static struct usba_ep *usba_udc_pdata(struct usba_platform_data *pdata,
struct usba_udc *udc)
{
@@ -1286,11 +1289,9 @@ static struct usba_ep *usba_udc_pdata(struct usba_platform_data *pdata,
int usba_udc_probe(struct usba_platform_data *pdata)
{
- struct usba_udc *udc;
-
- udc = &controller;
+ controller = &udc_controller;
- udc->usba_ep = usba_udc_pdata(pdata, udc);
+ controller->usba_ep = usba_udc_pdata(pdata, controller);
return 0;
}
- Sort includes - Forward declare controller structures Signed-off-by: Zixun LI <zli@ogga.fr> --- drivers/usb/gadget/atmel_usba_udc.c | 59 +++++++++++++++-------------- 1 file changed, 30 insertions(+), 29 deletions(-)