@@ -110,13 +110,13 @@ tiboot3.bin, tispl.bin and u-boot.img are stored on the uSD card.
.. code-block:: bash
- sf probe
+ mtd list
fatload mmc 1 ${loadaddr} tiboot3.bin
- sf update $loadaddr 0x0 $filesize
+ mtd write ospi.tiboot3 ${loadaddr} 0 ${filesize}
fatload mmc 1 ${loadaddr} tispl.bin
- sf update $loadaddr 0x80000 $filesize
+ mtd write ospi.tispl ${loadaddr} 0 ${filesize}
fatload mmc 1 ${loadaddr} u-boot.img
- sf update $loadaddr 0x280000 $filesize
+ mtd write ospi.u-boot ${loadaddr} 0 ${filesize}
Boot Modes
@@ -111,13 +111,13 @@ tiboot3.bin, tispl.bin and u-boot.img are stored on the uSD card.
.. code-block:: bash
- sf probe
+ mtd list
fatload mmc 1 ${loadaddr} tiboot3.bin
- sf update $loadaddr 0x0 $filesize
+ mtd write ospi.tiboot3 ${loadaddr} 0 ${filesize}
fatload mmc 1 ${loadaddr} tispl.bin
- sf update $loadaddr 0x80000 $filesize
+ mtd write ospi.tispl ${loadaddr} 0 ${filesize}
fatload mmc 1 ${loadaddr} u-boot.img
- sf update $loadaddr 0x280000 $filesize
+ mtd write ospi.u-boot ${loadaddr} 0 ${filesize}
Boot Modes
Update Flash to SPI NOR chapter for use with mtd commands. This is more convenient as we do not have to remember any offsets in the SPI. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> --- doc/board/phytec/phycore-am62x.rst | 8 ++++---- doc/board/phytec/phycore-am64x.rst | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-)