diff mbox series

arm: dts: mvebu: Update DTS for Thecus N2350 board

Message ID 20240610003431.14148-1-mibodhi@gmail.com
State Accepted
Commit 11558bf2515db530cd8c384d95802f6c4af0d659
Delegated to: Stefan Roese
Headers show
Series arm: dts: mvebu: Update DTS for Thecus N2350 board | expand

Commit Message

Tony Dinh June 10, 2024, 12:34 a.m. UTC
- Change the spi-max-frequency to 50000000 (50 Mhz). According to the
data sheet[1], the MX25L3205D max frequency is 86 Mhz. Using 50 Mhz in
the DTS to ensure u-boot is consistent with what Linux kernel expected.
- Update GPIO fan to conform to the latest DT binding.

[1] MX25L3205D-MX25L1605D-MX25L6405D-Macronix-MX25L3205DM2I-12G-datasheet.pdf

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---

 arch/arm/dts/armada-385-thecus-n2350.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Dragan Simic June 10, 2024, 1:07 a.m. UTC | #1
Hello Tony,

Please see a few comments below.

On 2024-06-10 02:34, Tony Dinh wrote:
> - Change the spi-max-frequency to 50000000 (50 Mhz). According to the
> data sheet[1], the MX25L3205D max frequency is 86 Mhz. Using 50 Mhz in
> the DTS to ensure u-boot is consistent with what Linux kernel expected.
> - Update GPIO fan to conform to the latest DT binding.

There's no need for the bullet points, plain prose will do fine instead.

> [1] 
> MX25L3205D-MX25L1605D-MX25L6405D-Macronix-MX25L3205DM2I-12G-datasheet.pdf

Unless you can provide a real, working URL for the datasheet, this 
reference
should actually be deleted.

> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> ---
> 
>  arch/arm/dts/armada-385-thecus-n2350.dts | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts
> b/arch/arm/dts/armada-385-thecus-n2350.dts
> index 253cf01130..fdaa444e51 100644
> --- a/arch/arm/dts/armada-385-thecus-n2350.dts
> +++ b/arch/arm/dts/armada-385-thecus-n2350.dts
> @@ -2,7 +2,7 @@
>  /*
>   * Device Tree file for Thecus N2350 board
>   *
> - * Copyright (C) 2018-2023 Tony Dinh <mibodhi@gmail.com>
> + * Copyright (C) 2018-2024 Tony Dinh <mibodhi@gmail.com>
>   * Copyright (C) 2018 Manuel Jung <manuel.jung@hotmail.com>
>   */
> 
> @@ -143,9 +143,9 @@
>  	fan {
>  		compatible = "gpio-fan";
>  		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
> -		gpio-fan,speed-map = <	  0  0
> -					600  1
> -					3000 2 >;
> +		gpio-fan,speed-map = <	  0  0>,
> +					<600  1>,
> +					<3000 2 >;
>  		pinctrl-0 = <&pmx_fan>;
>  		pinctrl-names = "default";
>  	};
> @@ -415,7 +415,7 @@
>  		compatible = "jedec,spi-nor";
>  		reg = <0>;
> 
> -		spi-max-frequency = <108000000>;
> +		spi-max-frequency = <50000000>;
>  		spi-cpha;
> 
>  		partition@0 {
Tony Dinh June 11, 2024, 9:42 p.m. UTC | #2
Hi Dragan,

On Sun, Jun 9, 2024 at 6:07 PM Dragan Simic <dsimic@manjaro.org> wrote:
>
> Hello Tony,
>
> Please see a few comments below.
>
> On 2024-06-10 02:34, Tony Dinh wrote:
> > - Change the spi-max-frequency to 50000000 (50 Mhz). According to the
> > data sheet[1], the MX25L3205D max frequency is 86 Mhz. Using 50 Mhz in
> > the DTS to ensure u-boot is consistent with what Linux kernel expected.
> > - Update GPIO fan to conform to the latest DT binding.
>
> There's no need for the bullet points, plain prose will do fine instead.

I like bullet points :) All my patch descriptions have bullet points
when there are 2 or more different items.

>
> > [1]
> > MX25L3205D-MX25L1605D-MX25L6405D-Macronix-MX25L3205DM2I-12G-datasheet.pdf
>
> Unless you can provide a real, working URL for the datasheet, this
> reference
> should actually be deleted.

It was my oversight. That should have been this URL:

https://www.macronix.com/Lists/Datasheet/Attachments/8575/MX25L3205D,%203V,%2032Mb,%20v1.5.pdf

I'll wait for Stefan to review the patch and let him decide whether I
should send in a V2 patch or he will modify the commit description.

Thanks for the comments!

All the best,
Tony

>
> > Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> > ---
> >
> >  arch/arm/dts/armada-385-thecus-n2350.dts | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts
> > b/arch/arm/dts/armada-385-thecus-n2350.dts
> > index 253cf01130..fdaa444e51 100644
> > --- a/arch/arm/dts/armada-385-thecus-n2350.dts
> > +++ b/arch/arm/dts/armada-385-thecus-n2350.dts
> > @@ -2,7 +2,7 @@
> >  /*
> >   * Device Tree file for Thecus N2350 board
> >   *
> > - * Copyright (C) 2018-2023 Tony Dinh <mibodhi@gmail.com>
> > + * Copyright (C) 2018-2024 Tony Dinh <mibodhi@gmail.com>
> >   * Copyright (C) 2018 Manuel Jung <manuel.jung@hotmail.com>
> >   */
> >
> > @@ -143,9 +143,9 @@
> >       fan {
> >               compatible = "gpio-fan";
> >               gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
> > -             gpio-fan,speed-map = <    0  0
> > -                                     600  1
> > -                                     3000 2 >;
> > +             gpio-fan,speed-map = <    0  0>,
> > +                                     <600  1>,
> > +                                     <3000 2 >;
> >               pinctrl-0 = <&pmx_fan>;
> >               pinctrl-names = "default";
> >       };
> > @@ -415,7 +415,7 @@
> >               compatible = "jedec,spi-nor";
> >               reg = <0>;
> >
> > -             spi-max-frequency = <108000000>;
> > +             spi-max-frequency = <50000000>;
> >               spi-cpha;
> >
> >               partition@0 {
Stefan Roese July 8, 2024, 2:15 p.m. UTC | #3
On 6/11/24 23:42, Tony Dinh wrote:
> Hi Dragan,
> 
> On Sun, Jun 9, 2024 at 6:07 PM Dragan Simic <dsimic@manjaro.org> wrote:
>>
>> Hello Tony,
>>
>> Please see a few comments below.
>>
>> On 2024-06-10 02:34, Tony Dinh wrote:
>>> - Change the spi-max-frequency to 50000000 (50 Mhz). According to the
>>> data sheet[1], the MX25L3205D max frequency is 86 Mhz. Using 50 Mhz in
>>> the DTS to ensure u-boot is consistent with what Linux kernel expected.
>>> - Update GPIO fan to conform to the latest DT binding.
>>
>> There's no need for the bullet points, plain prose will do fine instead.
> 
> I like bullet points :) All my patch descriptions have bullet points
> when there are 2 or more different items.
> 
>>
>>> [1]
>>> MX25L3205D-MX25L1605D-MX25L6405D-Macronix-MX25L3205DM2I-12G-datasheet.pdf
>>
>> Unless you can provide a real, working URL for the datasheet, this
>> reference
>> should actually be deleted.
> 
> It was my oversight. That should have been this URL:
> 
> https://www.macronix.com/Lists/Datasheet/Attachments/8575/MX25L3205D,%203V,%2032Mb,%20v1.5.pdf
> 
> I'll wait for Stefan to review the patch and let him decide whether I
> should send in a V2 patch or he will modify the commit description.

I've changed the commit message accordingly.

Applied to u-boot-marvell/master

Thanks,
Stefan


> Thanks for the comments!
> 
> All the best,
> Tony
> 
>>
>>> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
>>> ---
>>>
>>>   arch/arm/dts/armada-385-thecus-n2350.dts | 10 +++++-----
>>>   1 file changed, 5 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts
>>> b/arch/arm/dts/armada-385-thecus-n2350.dts
>>> index 253cf01130..fdaa444e51 100644
>>> --- a/arch/arm/dts/armada-385-thecus-n2350.dts
>>> +++ b/arch/arm/dts/armada-385-thecus-n2350.dts
>>> @@ -2,7 +2,7 @@
>>>   /*
>>>    * Device Tree file for Thecus N2350 board
>>>    *
>>> - * Copyright (C) 2018-2023 Tony Dinh <mibodhi@gmail.com>
>>> + * Copyright (C) 2018-2024 Tony Dinh <mibodhi@gmail.com>
>>>    * Copyright (C) 2018 Manuel Jung <manuel.jung@hotmail.com>
>>>    */
>>>
>>> @@ -143,9 +143,9 @@
>>>        fan {
>>>                compatible = "gpio-fan";
>>>                gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
>>> -             gpio-fan,speed-map = <    0  0
>>> -                                     600  1
>>> -                                     3000 2 >;
>>> +             gpio-fan,speed-map = <    0  0>,
>>> +                                     <600  1>,
>>> +                                     <3000 2 >;
>>>                pinctrl-0 = <&pmx_fan>;
>>>                pinctrl-names = "default";
>>>        };
>>> @@ -415,7 +415,7 @@
>>>                compatible = "jedec,spi-nor";
>>>                reg = <0>;
>>>
>>> -             spi-max-frequency = <108000000>;
>>> +             spi-max-frequency = <50000000>;
>>>                spi-cpha;
>>>
>>>                partition@0 {

Viele Grüße,
Stefan Roese
diff mbox series

Patch

diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts b/arch/arm/dts/armada-385-thecus-n2350.dts
index 253cf01130..fdaa444e51 100644
--- a/arch/arm/dts/armada-385-thecus-n2350.dts
+++ b/arch/arm/dts/armada-385-thecus-n2350.dts
@@ -2,7 +2,7 @@ 
 /*
  * Device Tree file for Thecus N2350 board
  *
- * Copyright (C) 2018-2023 Tony Dinh <mibodhi@gmail.com>
+ * Copyright (C) 2018-2024 Tony Dinh <mibodhi@gmail.com>
  * Copyright (C) 2018 Manuel Jung <manuel.jung@hotmail.com>
  */
 
@@ -143,9 +143,9 @@ 
 	fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <	  0  0
-					600  1
-					3000 2 >;
+		gpio-fan,speed-map = <	  0  0>,
+					<600  1>,
+					<3000 2 >;
 		pinctrl-0 = <&pmx_fan>;
 		pinctrl-names = "default";
 	};
@@ -415,7 +415,7 @@ 
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 
-		spi-max-frequency = <108000000>;
+		spi-max-frequency = <50000000>;
 		spi-cpha;
 
 		partition@0 {