diff mbox series

[next,v3,6/8] arm64: dts: rockchip: add usb-id extcon on rk3588 tiger

Message ID 20240610-tiger-v3-6-2b4731f95757@cherry.de
State Accepted
Commit d00d80e6dd02138ed2e299925c8bd064513a6d3d
Delegated to: Kever Yang
Headers show
Series rockchip: add support for Theobroma Systems SOM-RK3588-Q7 Tiger module | expand

Commit Message

Quentin Schulz June 10, 2024, 1:13 p.m. UTC 
From: Heiko Stuebner <heiko.stuebner@cherry.de>

The Q7 standard specifies a usb-id pin on the connector to distiuish
between host and device mode. Model this via the usb-id extcon binding.

While the pin is part of the Q7 standard, so part of the module, the
extcon stays disabled in the som dtsi and will only be enabled in a
baseboard using it.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

[ upstream commit: eabb53f5dacfd643b5255f35bad30b8f914decdc ]

(cherry picked from commit 4843cec4092318ef7feb0999b0d34ef817465b33)
---
 dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi
index a8565720cf5..aebe1fedd2d 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi
@@ -23,6 +23,14 @@ 
 		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
 	};
 
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -327,6 +335,13 @@ 
 			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &saradc {