diff mbox series

[v3,1/7] configs: zynqmp_kria: Enable CMD_FUSE and ZYNQMP_EFUSE

Message ID 20240604142741.425307-2-lukas.funke-oss@weidmueller.com
State Changes Requested
Delegated to: Michal Simek
Headers show
Series Add eFuse access for ZynqMP | expand

Commit Message

Lukas Funke June 4, 2024, 2:27 p.m. UTC 
From: Lukas Funke <lukas.funke@weidmueller.com>

Enable CMD_FUSE and ZYNQMP_EFUSE in order to be able to write
ZyqnMP eFuses from within the bootloader for Kria SoM.

Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
---

(no changes since v1)

 configs/xilinx_zynqmp_virt_defconfig | 2 ++
 1 file changed, 2 insertions(+)

Comments

Michal Simek June 6, 2024, 1:59 p.m. UTC | #1 
On 6/4/24 16:27, lukas.funke-oss@weidmueller.com wrote:
> From: Lukas Funke <lukas.funke@weidmueller.com>
> 
> Enable CMD_FUSE and ZYNQMP_EFUSE in order to be able to write
> ZyqnMP eFuses from within the bootloader for Kria SoM.
> 
> Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
> ---
> 
> (no changes since v1)
> 
>   configs/xilinx_zynqmp_virt_defconfig | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
> index ee87beb19c6..1edd4ac77b1 100644
> --- a/configs/xilinx_zynqmp_virt_defconfig
> +++ b/configs/xilinx_zynqmp_virt_defconfig
> @@ -65,6 +65,7 @@ CONFIG_CMD_DFU=y
>   CONFIG_CMD_FPGA_LOADBP=y
>   CONFIG_CMD_FPGA_LOADP=y
>   CONFIG_CMD_FPGA_LOAD_SECURE=y
> +CONFIG_CMD_FUSE=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_PWM=y
>   CONFIG_CMD_GPT=y
> @@ -147,6 +148,7 @@ CONFIG_I2C_MUX_PCA954x=y
>   CONFIG_LED=y
>   CONFIG_LED_GPIO=y
>   CONFIG_MISC=y
> +CONFIG_ZYNQMP_EFUSE=y
>   CONFIG_I2C_EEPROM=y
>   CONFIG_SUPPORT_EMMC_BOOT=y
>   CONFIG_MMC_IO_VOLTAGE=y


The patch itself is fine but it should be after symbol is defined.
It means Kconfig change first and then enable it.

M
diff mbox series

Patch

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index ee87beb19c6..1edd4ac77b1 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -65,6 +65,7 @@  CONFIG_CMD_DFU=y
 CONFIG_CMD_FPGA_LOADBP=y
 CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_FPGA_LOAD_SECURE=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_PWM=y
 CONFIG_CMD_GPT=y
@@ -147,6 +148,7 @@  CONFIG_I2C_MUX_PCA954x=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
+CONFIG_ZYNQMP_EFUSE=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y