@@ -83,6 +83,9 @@ config TPL_TEXT_BASE
config TPL_STACK
default 0xff0e4fff
+config TPL_SYS_MALLOC_F_LEN
+ default 0x600
+
config DEBUG_UART_CHANNEL
int "Mux channel to use for debug UART2/UART3"
depends on DEBUG_UART_BOARD_INIT
@@ -16,7 +16,6 @@ CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_EVB_PX30=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -17,7 +17,6 @@ CONFIG_TARGET_EVB_PX30=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -19,7 +19,6 @@ CONFIG_TARGET_ODROID_GO2=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -17,7 +17,6 @@ CONFIG_TARGET_PX30_CORE=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -17,7 +17,6 @@ CONFIG_TARGET_PX30_CORE=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -17,7 +17,6 @@ CONFIG_TARGET_PX30_CORE=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -17,7 +17,6 @@ CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_RINGNECK_PX30=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL_STACK=0x400000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y