diff --git a/arch/arm/dts/rk3399-eaidk-610.dts b/arch/arm/dts/rk3399-eaidk-610.dts
deleted file mode 100644
index 173da81fc231..000000000000
--- a/arch/arm/dts/rk3399-eaidk-610.dts
+++ /dev/null
@@ -1,940 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "OPEN AI LAB EAIDK-610";
-	compatible = "openailab,eaidk-610", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 25000 0>;
-		brightness-levels = <
-			  0   1   2   3   4   5   6   7
-			  8   9  10  11  12  13  14  15
-			 16  17  18  19  20  21  22  23
-			 24  25  26  27  28  29  30  31
-			 32  33  34  35  36  37  38  39
-			 40  41  42  43  44  45  46  47
-			 48  49  50  51  52  53  54  55
-			 56  57  58  59  60  61  62  63
-			 64  65  66  67  68  69  70  71
-			 72  73  74  75  76  77  78  79
-			 80  81  82  83  84  85  86  87
-			 88  89  90  91  92  93  94  95
-			 96  97  98  99 100 101 102 103
-			104 105 106 107 108 109 110 111
-			112 113 114 115 116 117 118 119
-			120 121 122 123 124 125 126 127
-			128 129 130 131 132 133 134 135
-			136 137 138 139 140 141 142 143
-			144 145 146 147 148 149 150 151
-			152 153 154 155 156 157 158 159
-			160 161 162 163 164 165 166 167
-			168 169 170 171 172 173 174 175
-			176 177 178 179 180 181 182 183
-			184 185 186 187 188 189 190 191
-			192 193 194 195 196 197 198 199
-			200 201 202 203 204 205 206 207
-			208 209 210 211 212 213 214 215
-			216 217 218 219 220 221 222 223
-			224 225 226 227 228 229 230 231
-			232 233 234 235 236 237 238 239
-			240 241 242 243 244 245 246 247
-			248 249 250 251 252 253 254 255>;
-		default-brightness-level = <200>;
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	dc_12v: dc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		key-power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_pin>, <&user_led_pin>,
-			    <&heartbeat_led_pin>, <&wlan_active_led_pin>,
-			    <&bt_active_led_pin>;
-
-		work_led: led-0 {
-			label = "blue:work";
-			default-state = "on";
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-		};
-
-		user_led: led-1 {
-			label = "read:user";
-			default-state = "off";
-			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-		};
-
-		heartbeat_led: led-2 {
-			label = "green:heartbeat";
-			linux,default-trigger = "heartbeat";
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan_active_led: led-3 {
-			label = "yellow:wlan";
-			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		bt_active_led: led-4 {
-			label = "blue:bt";
-			gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "hci0-power";
-			default-state = "off";
-		};
-	};
-
-	rt5651-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "realtek,rt5651-codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Mic Jack", "MICBIAS1",
-			"IN1P", "Mic Jack",
-			"Headphone Jack", "HPOL",
-			"Headphone Jack", "HPOR";
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1>;
-		};
-		simple-audio-card,codec {
-			sound-dai = <&rt5651>;
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	/* For USB3.0 Port1/2 */
-	vcc5v0_host1: vcc5v0-host1-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host1_en>;
-		regulator-name = "vcc5v0_host1";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	/* For USB2.0 Port1/2 */
-	vcc5v0_host3: vcc5v0-host3-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host3_en>;
-		regulator-name = "vcc5v0_host3";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_typec: vcc5v0-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec_en>;
-		regulator-name = "vcc5v0_typec";
-		regulator-always-on;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		vcc10-supply = <&vcc3v3_sys>;
-		vcc11-supply = <&vcc3v3_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_3v0>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc2v8_dvp: LDO_REG2 {
-				regulator-name = "vcc2v8_dvp";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_b";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_pin>;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_gpu";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_pin>;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-
-	rt5651: audio-codec@1a {
-		compatible = "rockchip,rt5651";
-		reg = <0x1a>;
-		clocks = <&cru SCLK_I2S_8CH_OUT>;
-		clock-names = "mclk";
-		hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
-		spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		#sound-dai-cells = <0>;
-	};
-
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc5v0_typec>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				usbc0_role_sw: endpoint@0 {
-					remote-endpoint = <&dwc3_0_role_switch>;
-				};
-			};
-		};
-
-		connector {
-			compatible = "usb-c-connector";
-			data-role = "dual";
-			label = "USB-C";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					usbc_hs: endpoint {
-						remote-endpoint = <&u2phy0_typec_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					usbc_ss: endpoint {
-						remote-endpoint = <&tcphy0_typec_ss>;
-					};
-				};
-			};
-		};
-	};
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	audio-supply = <&vcca1v8_codec>;
-	bt656-supply = <&vcc_3v0>;
-	gpio1830-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-};
-
-&pmu_io_domains {
-	status = "okay";
-
-	pmu1830-supply = <&vcc_3v0>;
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	bt {
-		bt_enable_h: bt-enable-h {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	fusb302x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	lcd-panel {
-		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		work_led_pin: work-led-pin {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led_pin: user-led-pin {
-			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		heartbeat_led_pin: heartbeat-led-pin {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wlan_active_led_pin: wlan-led-pin {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_active_led_pin: bt-led-pin {
-			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	rt5651 {
-		rt5651_hpcon: rt5640-hpcon {
-			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec_en: vcc5v0_typec_en {
-			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host3_en: vcc5v0-host3-en {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc5v0_host1_en: vcc5v0-host1-en {
-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wifi {
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdio0 {
-	/* WiFi & BT combo module AMPAK AP6255 */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	bus-width = <4>;
-	clock-frequency = <50000000>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy0_usb3 {
-	orientation-switch;
-	port {
-		tcphy0_typec_ss: endpoint {
-			remote-endpoint = <&usbc_ss>;
-		};
-	};
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host3>;
-		status = "okay";
-	};
-
-	port {
-		u2phy0_typec_hs: endpoint {
-			remote-endpoint = <&usbc_hs>;
-		};
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host3>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4345c5";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		max-speed = <1500000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	usb-role-switch;
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dwc3_0_role_switch: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&usbc0_role_sw>;
-		};
-	};
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
deleted file mode 100644
index 55eca7a50a1f..000000000000
--- a/arch/arm/dts/rk3399-evb.dts
+++ /dev/null
@@ -1,485 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-
-/ {
-	model = "Rockchip RK3399 Evaluation Board";
-	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdhci;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <
-			  0   1   2   3   4   5   6   7
-			  8   9  10  11  12  13  14  15
-			 16  17  18  19  20  21  22  23
-			 24  25  26  27  28  29  30  31
-			 32  33  34  35  36  37  38  39
-			 40  41  42  43  44  45  46  47
-			 48  49  50  51  52  53  54  55
-			 56  57  58  59  60  61  62  63
-			 64  65  66  67  68  69  70  71
-			 72  73  74  75  76  77  78  79
-			 80  81  82  83  84  85  86  87
-			 88  89  90  91  92  93  94  95
-			 96  97  98  99 100 101 102 103
-			104 105 106 107 108 109 110 111
-			112 113 114 115 116 117 118 119
-			120 121 122 123 124 125 126 127
-			128 129 130 131 132 133 134 135
-			136 137 138 139 140 141 142 143
-			144 145 146 147 148 149 150 151
-			152 153 154 155 156 157 158 159
-			160 161 162 163 164 165 166 167
-			168 169 170 171 172 173 174 175
-			176 177 178 179 180 181 182 183
-			184 185 186 187 188 189 190 191
-			192 193 194 195 196 197 198 199
-			200 201 202 203 204 205 206 207
-			208 209 210 211 212 213 214 215
-			216 217 218 219 220 221 222 223
-			224 225 226 227 228 229 230 231
-			232 233 234 235 236 237 238 239
-			240 241 242 243 244 245 246 247
-			248 249 250 251 252 253 254 255>;
-		default-brightness-level = <200>;
-		pwms = <&pwm0 0 25000 0>;
-	};
-
-	edp_panel: edp-panel {
-		compatible = "lg,lp079qx1-sp0v";
-		backlight = <&backlight>;
-		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
-		power-supply = <&vcc3v3_s0>;
-
-		port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&edp_out_panel>;
-			};
-		};
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	vdd_center: vdd-center {
-		compatible = "pwm-regulator";
-		pwms = <&pwm3 0 25000 0>;
-		regulator-name = "vdd_center";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		status = "okay";
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc_phy: vcc-phy-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_phy";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_phy: vcc-phy-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_phy";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-};
-
-&edp {
-	status = "okay";
-	force-hpd;
-
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
-	};
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_phy>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-		clock-output-names = "rk808-clkout1", "rk808-clkout2";
-
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		vcc10-supply = <&vcc3v3_sys>;
-		vcc11-supply = <&vcc3v3_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc1v8_pmu>;
-
-		regulators {
-			vdd_log: DCDC_REG1 {
-				regulator-name = "vdd_log";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v0_tp: LDO_REG2 {
-				regulator-name = "vcc3v0_tp";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sd: LDO_REG4 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "disabled";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>;
-	status = "disabled";
-};
-
-&u2phy0 {
-	status = "okay";
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_host>;
-	status = "okay";
-};
-
-&u2phy1 {
-	status = "okay";
-};
-
-&u2phy1_host {
-	phy-supply = <&vcc5v0_host>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&pinctrl {
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins =
-				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts
deleted file mode 100644
index 30e4879f322c..000000000000
--- a/arch/arm/dts/rk3399-ficus.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
- */
-
-/dts-v1/;
-#include "rk3399-rock960.dtsi"
-
-/ {
-	model = "96boards RK3399 Ficus";
-	compatible = "vamrs,ficus", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
-			    <&user_led3_pin>, <&user_led4_pin>,
-			    <&wlan_led_pin>, <&bt_led_pin>;
-
-		user_led1: led-1 {
-			label = "red:user1";
-			gpios = <&gpio4 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user_led2: led-2 {
-			label = "red:user2";
-			gpios = <&gpio4 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user_led3: led-3 {
-			label = "red:user3";
-			gpios = <&gpio4 30 0>;
-			linux,default-trigger = "mmc1";
-		};
-
-		user_led4: led-4 {
-			label = "red:user4";
-			gpios = <&gpio1 0 0>;
-			panic-indicator;
-			linux,default-trigger = "none";
-		};
-
-		wlan_active_led: led-5 {
-			label = "red:wlan";
-			gpios = <&gpio1 1 0>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		bt_active_led: led-6 {
-			label = "red:bt";
-			gpios = <&gpio1 4 0>;
-			linux,default-trigger = "hci0-power";
-			default-state = "off";
-		};
-	};
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc3v3_sys>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
-};
-
-&pinctrl {
-	gmac {
-		rgmii_sleep_pins: rgmii-sleep-pins {
-			rockchip,pins =
-				<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-	};
-
-	pcie {
-		pcie_drv: pcie-drv {
-			rockchip,pins =
-				<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-			};
-	};
-
-	usb2 {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins =
-				<4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	leds {
-		user_led1_pin: user-led1-pin {
-			rockchip,pins =
-				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led2_pin: user-led2-pin {
-			rockchip,pins =
-				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led3_pin: user-led3-pin {
-			rockchip,pins =
-				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led4_pin: user-led4-pin {
-			rockchip,pins =
-				<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wlan_led_pin: wlan-led-pin {
-			rockchip,pins =
-				<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_led_pin: bt-led-pin {
-			rockchip,pins =
-				<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&spi1 {
-	/* On both Low speed and High speed expansion */
-	cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
-
-&vcc3v3_pcie {
-	gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-};
-
-&vcc5v0_host {
-	gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
deleted file mode 100644
index 260415d99aeb..000000000000
--- a/arch/arm/dts/rk3399-firefly.dts
+++ /dev/null
@@ -1,944 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Firefly-RK3399 Board";
-	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm0 0 25000 0>;
-		brightness-levels = <
-			  0   1   2   3   4   5   6   7
-			  8   9  10  11  12  13  14  15
-			 16  17  18  19  20  21  22  23
-			 24  25  26  27  28  29  30  31
-			 32  33  34  35  36  37  38  39
-			 40  41  42  43  44  45  46  47
-			 48  49  50  51  52  53  54  55
-			 56  57  58  59  60  61  62  63
-			 64  65  66  67  68  69  70  71
-			 72  73  74  75  76  77  78  79
-			 80  81  82  83  84  85  86  87
-			 88  89  90  91  92  93  94  95
-			 96  97  98  99 100 101 102 103
-			104 105 106 107 108 109 110 111
-			112 113 114 115 116 117 118 119
-			120 121 122 123 124 125 126 127
-			128 129 130 131 132 133 134 135
-			136 137 138 139 140 141 142 143
-			144 145 146 147 148 149 150 151
-			152 153 154 155 156 157 158 159
-			160 161 162 163 164 165 166 167
-			168 169 170 171 172 173 174 175
-			176 177 178 179 180 181 182 183
-			184 185 186 187 188 189 190 191
-			192 193 194 195 196 197 198 199
-			200 201 202 203 204 205 206 207
-			208 209 210 211 212 213 214 215
-			216 217 218 219 220 221 222 223
-			224 225 226 227 228 229 230 231
-			232 233 234 235 236 237 238 239
-			240 241 242 243 244 245 246 247
-			248 249 250 251 252 253 254 255>;
-		default-brightness-level = <200>;
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	dc_12v: dc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		key-power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&ir_int>;
-		pinctrl-names = "default";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
-
-		work_led: led-0 {
-			label = "work";
-			default-state = "on";
-			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		};
-
-		diy_led: led-1 {
-			label = "diy";
-			default-state = "off";
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	rt5640-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "rockchip,rt5640-codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Mic Jack", "MICBIAS1",
-			"IN1P", "Mic Jack",
-			"Headphone Jack", "HPOL",
-			"Headphone Jack", "HPOR";
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&rt5640>;
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	sound-dit {
-		compatible = "audio-graph-card";
-		label = "SPDIF";
-		dais = <&spdif_p0>;
-	};
-
-	spdif-dit {
-		compatible = "linux,spdif-dit";
-		#sound-dai-cells = <0>;
-
-		port {
-			dit_p0_0: endpoint {
-				remote-endpoint = <&spdif_p0_0>;
-			};
-		};
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pwr_en>;
-		regulator-name = "vcc3v3_pcie";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sys>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc5v0_typec: vcc5v0-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec_en>;
-		regulator-name = "vcc5v0_typec";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_sys: vcc-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc_sys>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <430000>;
-		regulator-max-microvolt = <1400000>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc_sys>;
-		vcc2-supply = <&vcc_sys>;
-		vcc3-supply = <&vcc_sys>;
-		vcc4-supply = <&vcc_sys>;
-		vcc6-supply = <&vcc_sys>;
-		vcc7-supply = <&vcc_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc_sys>;
-		vcc10-supply = <&vcc_sys>;
-		vcc11-supply = <&vcc_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc1v8_pmu>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc2v8_dvp: LDO_REG2 {
-				regulator-name = "vcc2v8_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <0>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-
-	rt5640: rt5640@1c {
-		compatible = "realtek,rt5640";
-		reg = <0x1c>;
-		clocks = <&cru SCLK_I2S_8CH_OUT>;
-		clock-names = "mclk";
-		realtek,in1-differential;
-		#sound-dai-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&rt5640_hpcon>;
-	};
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc5v0_typec>;
-		status = "okay";
-
-		connector {
-			compatible = "usb-c-connector";
-			data-role = "host";
-			label = "USB-C";
-			op-sink-microwatt = <1000000>;
-			power-role = "dual";
-			sink-pdos =
-				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
-			source-pdos =
-				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
-			try-power-role = "sink";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					usbc_hs: endpoint {
-						remote-endpoint =
-							<&u2phy0_typec_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					usbc_ss: endpoint {
-						remote-endpoint =
-							<&tcphy0_typec_ss>;
-					};
-				};
-			};
-		};
-	};
-
-	accelerometer@68 {
-		compatible = "invensense,mpu6500";
-		reg = <0x68>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	bt656-supply = <&vcc1v8_dvp>;
-	audio-supply = <&vcca1v8_codec>;
-	sdmmc-supply = <&vcc_sdio>;
-	gpio1830-supply = <&vcc_3v0>;
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	fusb302x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	ir {
-		ir_int: ir-int {
-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	lcd-panel {
-		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		work_led_pin: work-led-pin {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		diy_led_pin: diy-led-pin {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie {
-		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie_3g_drv: pcie-3g-drv {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	rt5640 {
-		rt5640_hpcon: rt5640-hpcon {
-			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec_en: vcc5v0_typec_en {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wifi {
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdio0 {
-	/* WiFi & BT combo module Ampak AP6356S */
-	bus-width = <4>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-
-	/* Power supply */
-	vqmmc-supply = <&vcc1v8_s3>;	/* IO line */
-	vmmc-supply = <&vcc_sdio>;	/* card's power */
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		brcm,drive-strength = <5>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-0 = <&spdif_bus_1>;
-	status = "okay";
-
-	spdif_p0: port {
-		spdif_p0_0: endpoint {
-			remote-endpoint = <&dit_p0_0>;
-		};
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy0_usb3 {
-	port {
-		tcphy0_typec_ss: endpoint {
-			remote-endpoint = <&usbc_ss>;
-		};
-	};
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-
-	port {
-		u2phy0_typec_hs: endpoint {
-			remote-endpoint = <&usbc_hs>;
-		};
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "otg";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-gru-bob.dts b/arch/arm/dts/rk3399-gru-bob.dts
deleted file mode 100644
index 1cba1d857c96..000000000000
--- a/arch/arm/dts/rk3399-gru-bob.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru-Bob Rev 4+ board device tree source
- *
- * Copyright 2018 Google, Inc
- */
-
-/dts-v1/;
-#include "rk3399-gru-chromebook.dtsi"
-
-/ {
-	model = "Google Bob";
-	compatible = "google,bob-rev13", "google,bob-rev12",
-		     "google,bob-rev11", "google,bob-rev10",
-		     "google,bob-rev9", "google,bob-rev8",
-		     "google,bob-rev7", "google,bob-rev6",
-		     "google,bob-rev5", "google,bob-rev4",
-		     "google,bob", "google,gru", "rockchip,rk3399";
-	chassis-type = "convertible";
-
-	edp_panel: edp-panel {
-		compatible = "boe,nv101wxmn51";
-		backlight = <&backlight>;
-		power-supply = <&pp3300_disp>;
-
-		port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&edp_out_panel>;
-			};
-		};
-	};
-};
-
-&ap_i2c_ts {
-	touchscreen: touchscreen@10 {
-		compatible = "elan,ekth3500";
-		reg = <0x10>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_int_l &touch_reset_l>;
-		reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ap_i2c_tp {
-	trackpad: trackpad@15 {
-		compatible = "elan,ekth3000";
-		reg = <0x15>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&trackpad_int_l>;
-		wakeup-source;
-	};
-};
-
-&backlight {
-	pwms = <&cros_ec_pwm 0>;
-};
-
-&cpu_alert0 {
-	temperature = <65000>;
-};
-
-&cpu_alert1 {
-	temperature = <70000>;
-};
-
-&spi0 {
-	status = "okay";
-
-	tpm@0 {
-		compatible = "google,cr50";
-		reg = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&h1_int_od_l>;
-		spi-max-frequency = <800000>;
-	};
-};
-
-&pinctrl {
-	tpm {
-		h1_int_od_l: h1-int-od-l {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&wlan_host_wake_l {
-	/* Kevin has an external pull up, but Bob does not. */
-	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
-};
diff --git a/arch/arm/dts/rk3399-gru-chromebook.dtsi b/arch/arm/dts/rk3399-gru-chromebook.dtsi
deleted file mode 100644
index cacbad35cfc8..000000000000
--- a/arch/arm/dts/rk3399-gru-chromebook.dtsi
+++ /dev/null
@@ -1,590 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru-Chromebook shared properties
- *
- * Copyright 2018 Google, Inc
- */
-
-#include "rk3399-gru.dtsi"
-
-/ {
-	pp900_ap: pp900-ap {
-		compatible = "regulator-fixed";
-		regulator-name = "pp900_ap";
-
-		/* EC turns on w/ pp900_ap_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	/* EC turns on w/ pp900_usb_en */
-	pp900_usb: pp900-ap {
-	};
-
-	/* EC turns on w/ pp900_pcie_en */
-	pp900_pcie: pp900-ap {
-	};
-
-	pp3000: pp3000 {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp3000_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
-		compatible = "pwm-regulator";
-		regulator-name = "ppvar_centerlogic_pwm";
-
-		pwms = <&pwm3 0 3337 0>;
-		pwm-supply = <&ppvar_sys>;
-		pwm-dutycycle-range = <100 0>;
-		pwm-dutycycle-unit = <100>;
-
-		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <799434>;
-		regulator-max-microvolt = <1049925>;
-	};
-
-	ppvar_centerlogic: ppvar-centerlogic {
-		compatible = "vctrl-regulator";
-		regulator-name = "ppvar_centerlogic";
-
-		regulator-min-microvolt = <799434>;
-		regulator-max-microvolt = <1049925>;
-
-		ctrl-supply = <&ppvar_centerlogic_pwm>;
-		ctrl-voltage-range = <799434 1049925>;
-
-		regulator-settling-time-up-us = <378>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
-	};
-
-	/* Schematics call this PPVAR even though it's fixed */
-	ppvar_logic: ppvar-logic {
-		compatible = "regulator-fixed";
-		regulator-name = "ppvar_logic";
-
-		/* EC turns on w/ ppvar_logic_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp1800_audio: pp1800-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800_audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_audio_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&pp1800>;
-	};
-
-	/* gpio is shared with pp3300_wifi_bt */
-	pp1800_pcie: pp1800-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800_pcie";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_module_pd_l>;
-
-		enable-active-high;
-		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
-		/*
-		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
-		 * This has been approximated as 8ms total.
-		 */
-		regulator-enable-ramp-delay = <8000>;
-
-		vin-supply = <&pp1800>;
-	};
-
-	/* Always on; plain and simple */
-	pp3000_ap: pp3000_emmc: pp3000 {
-	};
-
-	pp1500_ap_io: pp1500-ap-io {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1500_ap_io";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp1500_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		vin-supply = <&pp1800>;
-	};
-
-	pp3300_disp: pp3300-disp {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_disp";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp3300_disp_en>;
-
-		enable-active-high;
-		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-
-		startup-delay-us = <2000>;
-		vin-supply = <&pp3300>;
-	};
-
-	/* EC turns on w/ pp3300_usb_en_l */
-	pp3300_usb: pp3300 {
-	};
-
-	/* gpio is shared with pp1800_pcie and pinctrl is set there */
-	pp3300_wifi_bt: pp3300-wifi-bt {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_wifi_bt";
-
-		enable-active-high;
-		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
-		vin-supply = <&pp3300>;
-	};
-
-	/*
-	 * This is a bit of a hack. The WiFi module should be reset at least
-	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
-	 * With some stretching of the imagination, we can call the 1.8V
-	 * regulator a supply.
-	 */
-	wlan_pd_n: wlan-pd-n {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan_pd_n";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_module_reset_l>;
-
-		enable-active-high;
-		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-
-		vin-supply = <&pp1800_pcie>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-		power-supply = <&pp3300_disp>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en>;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l>;
-
-		wake_on_bt: key-wake-on-bt {
-			label = "Wake-on-Bluetooth";
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-};
-
-&ppvar_bigcpu {
-	min-slew-down-rate = <225>;
-	ovp-threshold-percent = <16>;
-};
-
-&ppvar_litcpu {
-	min-slew-down-rate = <225>;
-	ovp-threshold-percent = <16>;
-};
-
-&ppvar_gpu {
-	min-slew-down-rate = <225>;
-	ovp-threshold-percent = <16>;
-};
-
-&cdn_dp {
-	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
-};
-
-&dmc {
-	center-supply = <&ppvar_centerlogic>;
-	rockchip,pd-idle-dis-freq-hz = <800000000>;
-	rockchip,sr-idle-dis-freq-hz = <800000000>;
-	rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>;
-};
-
-&edp {
-	status = "okay";
-
-	/*
-	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
-	 * set this here, because rk3399-gru.dtsi ensures we can generate this
-	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
-	 */
-	assigned-clocks = <&cru PCLK_EDP>;
-	assigned-clock-rates = <24000000>;
-
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
-	};
-};
-
-&gpio0 {
-	gpio-line-names = /* GPIO0 A 0-7 */
-			  "AP_RTC_CLK_IN",
-			  "EC_AP_INT_L",
-			  "PP1800_AUDIO_EN",
-			  "BT_HOST_WAKE_L",
-			  "WLAN_MODULE_PD_L",
-			  "H1_INT_OD_L",
-			  "CENTERLOGIC_DVS_PWM",
-			  "",
-
-			  /* GPIO0 B 0-4 */
-			  "WIFI_HOST_WAKE_L",
-			  "PMUIO2_33_18_L",
-			  "PP1500_EN",
-			  "AP_EC_WARM_RESET_REQ",
-			  "PP3000_EN";
-};
-
-&gpio1 {
-	gpio-line-names = /* GPIO1 A 0-7 */
-			  "",
-			  "",
-			  "SPK_PA_EN",
-			  "",
-			  "TRACKPAD_INT_L",
-			  "AP_EC_S3_S0_L",
-			  "AP_EC_OVERTEMP",
-			  "AP_SPI_FLASH_MISO",
-
-			  /* GPIO1 B 0-7 */
-			  "AP_SPI_FLASH_MOSI_R",
-			  "AP_SPI_FLASH_CLK_R",
-			  "AP_SPI_FLASH_CS_L_R",
-			  "WLAN_MODULE_RESET_L",
-			  "WIFI_DISABLE_L",
-			  "MIC_INT",
-			  "",
-			  "AP_I2C_DVS_SDA",
-
-			  /* GPIO1 C 0-7 */
-			  "AP_I2C_DVS_SCL",
-			  "AP_BL_EN",
-			  /*
-			   * AP_FLASH_WP is crossystem ABI. Schematics call it
-			   * AP_FW_WP or CPU1_FW_WP, depending on the variant.
-			   */
-			  "AP_FLASH_WP",
-			  "LITCPU_DVS_PWM",
-			  "AP_I2C_AUDIO_SDA",
-			  "AP_I2C_AUDIO_SCL",
-			  "",
-			  "HEADSET_INT_L";
-};
-
-&gpio2 {
-	gpio-line-names = /* GPIO2 A 0-7 */
-			  "",
-			  "",
-			  "SD_IO_PWR_EN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-
-			  /* GPIO2 B 0-7 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-
-			  /* GPIO2 C 0-7 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "AP_SPI_EC_MISO",
-			  "AP_SPI_EC_MOSI",
-			  "AP_SPI_EC_CLK",
-			  "AP_SPI_EC_CS_L",
-
-			  /* GPIO2 D 0-4 */
-			  "BT_DEV_WAKE_L",
-			  "",
-			  "WIFI_PCIE_CLKREQ_L",
-			  "WIFI_PERST_L",
-			  "SD_PWR_3000_1800_L";
-};
-
-&gpio3 {
-	gpio-line-names = /* GPIO3 A 0-7 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "AP_SPI_TPM_MISO",
-			  "AP_SPI_TPM_MOSI_R",
-			  "AP_SPI_TPM_CLK_R",
-			  "AP_SPI_TPM_CS_L_R",
-
-			  /* GPIO3 B 0-7 */
-			  "EC_IN_RW",
-			  "",
-			  "AP_I2C_TP_SDA",
-			  "AP_I2C_TP_SCL",
-			  "AP_I2C_TP_PU_EN",
-			  "TOUCH_INT_L",
-			  "",
-			  "",
-
-			  /* GPIO3 C 0-7 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-
-			  /* GPIO3 D 0-7 */
-			  "I2S0_SCLK",
-			  "I2S0_LRCK_RX",
-			  "I2S0_LRCK_TX",
-			  "I2S0_SDI_0",
-			  "I2S0_SDI_1",
-			  "",
-			  "I2S0_SDO_1",
-			  "I2S0_SDO_0";
-};
-
-&gpio4 {
-	gpio-line-names = /* GPIO4 A 0-7 */
-			  "I2S_MCLK",
-			  "AP_I2C_MIC_SDA",
-			  "AP_I2C_MIC_SCL",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-
-			  /* GPIO4 B 0-7 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-
-			  /* GPIO4 C 0-7 */
-			  "AP_I2C_TS_SDA",
-			  "AP_I2C_TS_SCL",
-			  "GPU_DVS_PWM",
-			  "UART_DBG_TX_AP_RX",
-			  "UART_AP_TX_DBG_RX",
-			  "",
-			  "BIGCPU_DVS_PWM",
-			  "EDP_HPD_3V0",
-
-			  /* GPIO4 D 0-5 */
-			  "SD_CARD_DET_L",
-			  "USB_DP_HPD",
-			  "TOUCH_RESET_L",
-			  "PP3300_DISP_EN",
-			  "",
-			  "SD_SLOT_PWR_EN";
-};
-
-ap_i2c_mic: &i2c1 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	headsetcodec: rt5514@57 {
-		compatible = "realtek,rt5514";
-		reg = <0x57>;
-		realtek,dmic-init-delay-ms = <20>;
-	};
-};
-
-ap_i2c_tp: &i2c5 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	/*
-	 * Note strange pullup enable.  Apparently this avoids leakage but
-	 * still allows us to get nice 4.7K pullups for high speed i2c
-	 * transfers.  Basically we want the pullup on whenever the ap is
-	 * alive, so the "en" pin just gets set to output high.
-	 */
-	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
-};
-
-&cros_ec {
-	cros_ec_pwm: pwm {
-		compatible = "google,cros-ec-pwm";
-		#pwm-cells = <1>;
-	};
-
-	usbc_extcon1: extcon1 {
-		compatible = "google,extcon-usbc-cros-ec";
-		google,usb-port-id = <1>;
-	};
-};
-
-&sound {
-	rockchip,codec = <&max98357a &headsetcodec
-			  &codec &wacky_spi_audio &cdn_dp>;
-};
-
-&spi2 {
-	wacky_spi_audio: spi2@0 {
-		compatible = "realtek,rt5514";
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mic_int>;
-		/* May run faster once verified. */
-		spi-max-frequency = <10000000>;
-		wakeup-source;
-	};
-};
-
-&pci_rootport {
-	mvl_wifi: wifi@0,0 {
-		compatible = "pci1b4b,2b42";
-		reg = <0x0000 0x0 0x0 0x0 0x0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_host_wake_l>;
-		wakeup-source;
-	};
-};
-
-&tcphy1 {
-	status = "okay";
-	extcon = <&usbc_extcon1>;
-};
-
-&u2phy1 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-	extcon = <&usbc_extcon1>;
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&pinctrl {
-	discrete-regulators {
-		pp1500_en: pp1500-en {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		pp1800_audio_en: pp1800-audio-en {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
-					 &pcfg_pull_down>;
-		};
-
-		pp3000_en: pp3000-en {
-			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		pp3300_disp_en: pp3300-disp-en {
-			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		wlan_module_pd_l: wlan-module-pd-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
-					 &pcfg_pull_down>;
-		};
-	};
-};
-
-&wifi {
-	wifi_perst_l: wifi-perst-l {
-		rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-	};
-
-	wlan_host_wake_l: wlan-host-wake-l {
-		/* Kevin has an external pull up, but Bob does not */
-		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-	};
-};
diff --git a/arch/arm/dts/rk3399-gru-kevin.dts b/arch/arm/dts/rk3399-gru-kevin.dts
deleted file mode 100644
index 2cc9b3386c16..000000000000
--- a/arch/arm/dts/rk3399-gru-kevin.dts
+++ /dev/null
@@ -1,328 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru-Kevin Rev 6+ board device tree source
- *
- * Copyright 2016-2017 Google, Inc
- */
-
-/dts-v1/;
-#include "rk3399-gru-chromebook.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/*
- * Kevin-specific things
- *
- * Things in this section should use names from Kevin schematic since no
- * equivalent exists in Gru schematic.  If referring to signals that exist
- * in Gru we use the Gru names, though.  Confusing enough for you?
- */
-/ {
-	model = "Google Kevin";
-	compatible = "google,kevin-rev15", "google,kevin-rev14",
-		     "google,kevin-rev13", "google,kevin-rev12",
-		     "google,kevin-rev11", "google,kevin-rev10",
-		     "google,kevin-rev9", "google,kevin-rev8",
-		     "google,kevin-rev7", "google,kevin-rev6",
-		     "google,kevin", "google,gru", "rockchip,rk3399";
-	chassis-type = "convertible";
-
-	/* Power tree */
-
-	p3_3v_dig: p3-3v-dig {
-		compatible = "regulator-fixed";
-		regulator-name = "p3.3v_dig";
-		pinctrl-names = "default";
-		pinctrl-0 = <&cpu3_pen_pwr_en>;
-
-		enable-active-high;
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		vin-supply = <&pp3300>;
-	};
-
-	edp_panel: edp-panel {
-		compatible = "sharp,lq123p1jx31";
-		backlight = <&backlight>;
-		power-supply = <&pp3300_disp>;
-
-		panel-timing {
-			clock-frequency = <266666667>;
-			hactive = <2400>;
-			hfront-porch = <48>;
-			hback-porch = <84>;
-			hsync-len = <32>;
-			hsync-active = <0>;
-			vactive = <1600>;
-			vfront-porch = <3>;
-			vback-porch = <120>;
-			vsync-len = <10>;
-			vsync-active = <0>;
-		};
-
-		port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&edp_out_panel>;
-			};
-		};
-	};
-
-	thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <25500>;
-		pulldown-ohm = <0>;
-		io-channels = <&saradc 2>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	thermistor_ppvar_litcpu: thermistor-ppvar-litcpu {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <25500>;
-		pulldown-ohm = <0>;
-		io-channels = <&saradc 3>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&backlight {
-	pwms = <&cros_ec_pwm 1>;
-};
-
-&gpio_keys {
-	pinctrl-names = "default";
-	pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
-
-	switch-pen-insert {
-		label = "Pen Insert";
-		/* Insert = low, eject = high */
-		gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		linux,code = <SW_PEN_INSERTED>;
-		linux,input-type = <EV_SW>;
-		wakeup-source;
-	};
-};
-
-&thermal_zones {
-	bigcpu_reg_thermal: bigcpu-reg-thermal {
-		polling-delay-passive = <100>; /* milliseconds */
-		polling-delay = <1000>; /* milliseconds */
-		thermal-sensors = <&thermistor_ppvar_bigcpu 0>;
-		sustainable-power = <4000>;
-
-		ppvar_bigcpu_trips: trips {
-			ppvar_bigcpu_on: ppvar-bigcpu-on {
-				temperature = <40000>;	/* millicelsius */
-				hysteresis = <2000>;	/* millicelsius */
-				type = "passive";
-			};
-
-			ppvar_bigcpu_alert: ppvar-bigcpu-alert {
-				temperature = <50000>;	/* millicelsius */
-				hysteresis = <2000>;	/* millicelsius */
-				type = "passive";
-			};
-
-			ppvar_bigcpu_crit: ppvar-bigcpu-crit {
-				temperature = <90000>;	/* millicelsius */
-				hysteresis = <0>;	/* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			map0 {
-				trip = <&ppvar_bigcpu_alert>;
-				cooling-device =
-					<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				contribution = <4096>;
-			};
-			map1 {
-				trip = <&ppvar_bigcpu_alert>;
-				cooling-device =
-					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				contribution = <1024>;
-			};
-		};
-	};
-
-	litcpu_reg_thermal: litcpu-reg-thermal {
-		polling-delay-passive = <100>; /* milliseconds */
-		polling-delay = <1000>; /* milliseconds */
-		thermal-sensors = <&thermistor_ppvar_litcpu 0>;
-		sustainable-power = <4000>;
-
-		ppvar_litcpu_trips: trips {
-			ppvar_litcpu_on: ppvar-litcpu-on {
-				temperature = <40000>;	/* millicelsius */
-				hysteresis = <2000>;	/* millicelsius */
-				type = "passive";
-			};
-
-			ppvar_litcpu_alert: ppvar-litcpu-alert {
-				temperature = <50000>;	/* millicelsius */
-				hysteresis = <2000>;	/* millicelsius */
-				type = "passive";
-			};
-
-			ppvar_litcpu_crit: ppvar-litcpu-crit {
-				temperature = <90000>;	/* millicelsius */
-				hysteresis = <0>;	/* millicelsius */
-				type = "critical";
-			};
-		};
-	};
-};
-
-ap_i2c_tpm: &i2c0 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times. */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	tpm: tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-		powered-while-suspended;
-	};
-};
-
-ap_i2c_dig: &i2c2 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times. */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	digitizer: digitizer@9 {
-		/* wacom,w9013 */
-		compatible = "hid-over-i2c";
-		reg = <0x9>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
-
-		vdd-supply = <&p3_3v_dig>;
-		post-power-on-delay-ms = <100>;
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-
-		hid-descr-addr = <0x1>;
-	};
-};
-
-/* Adjustments to things in the gru baseboard */
-
-&ap_i2c_tp {
-	trackpad@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&trackpad_int_l>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		linux,gpio-keymap = <KEY_RESERVED
-				     KEY_RESERVED
-				     KEY_RESERVED
-				     BTN_LEFT>;
-		wakeup-source;
-	};
-};
-
-&ap_i2c_ts {
-	touchscreen@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_int_l>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&ppvar_bigcpu_pwm {
-	regulator-min-microvolt = <798674>;
-	regulator-max-microvolt = <1302172>;
-};
-
-&ppvar_bigcpu {
-	regulator-min-microvolt = <798674>;
-	regulator-max-microvolt = <1302172>;
-	ctrl-voltage-range = <798674 1302172>;
-};
-
-&ppvar_litcpu_pwm {
-	regulator-min-microvolt = <799065>;
-	regulator-max-microvolt = <1303738>;
-};
-
-&ppvar_litcpu {
-	regulator-min-microvolt = <799065>;
-	regulator-max-microvolt = <1303738>;
-	ctrl-voltage-range = <799065 1303738>;
-};
-
-&ppvar_gpu_pwm {
-	regulator-min-microvolt = <785782>;
-	regulator-max-microvolt = <1217729>;
-};
-
-&ppvar_gpu {
-	regulator-min-microvolt = <785782>;
-	regulator-max-microvolt = <1217729>;
-	ctrl-voltage-range = <785782 1217729>;
-};
-
-&ppvar_centerlogic_pwm {
-	regulator-min-microvolt = <800069>;
-	regulator-max-microvolt = <1049692>;
-};
-
-&ppvar_centerlogic {
-	regulator-min-microvolt = <800069>;
-	regulator-max-microvolt = <1049692>;
-	ctrl-voltage-range = <800069 1049692>;
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&pp1800_ap_io>;
-};
-
-&mvl_wifi {
-	marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */
-};
-
-&pinctrl {
-	digitizer {
-		/* Has external pullup */
-		cpu1_dig_irq_l: cpu1-dig-irq-l {
-			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		/* Has external pullup */
-		cpu1_dig_pdct_l: cpu1-dig-pdct-l {
-			rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	discrete-regulators {
-		cpu3_pen_pwr_en: cpu3-pen-pwr-en {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pen {
-		cpu1_pen_eject: cpu1-pen-eject {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi
deleted file mode 100644
index d90fe4d40d48..000000000000
--- a/arch/arm/dts/rk3399-gru.dtsi
+++ /dev/null
@@ -1,865 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru (and derivatives) board device tree source
- *
- * Copyright 2016-2017 Google, Inc
- */
-
-#include <dt-bindings/input/input.h>
-#include "rk3399.dtsi"
-#include "rk3399-op1-opp.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &sdmmc;
-		mmc1 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	/*
-	 * Power Tree
-	 *
-	 * In general an attempt is made to include all rails called out by
-	 * the schematic as long as those rails interact in some way with
-	 * the AP.  AKA:
-	 * - Rails that only connect to the EC (or devices that the EC talks to)
-	 *   are not included.
-	 * - Rails _are_ included if the rails go to the AP even if the AP
-	 *   doesn't currently care about them / they are always on.  The idea
-	 *   here is that it makes it easier to map to the schematic or extend
-	 *   later.
-	 *
-	 * If two rails are substantially the same from the AP's point of
-	 * view, though, we won't create a full fixed regulator.  We'll just
-	 * put the child rail as an alias of the parent rail.  Sometimes rails
-	 * look the same to the AP because one of these is true:
-	 * - The EC controls the enable and the EC always enables a rail as
-	 *   long as the AP is running.
-	 * - The rails are actually connected to each other by a jumper and
-	 *   the distinction is just there to add clarity/flexibility to the
-	 *   schematic.
-	 */
-
-	ppvar_sys: ppvar-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "ppvar_sys";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	pp1200_lpddr: pp1200-lpddr {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1200_lpddr";
-
-		/* EC turns on w/ lpddr_pwr_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp1800: pp1800 {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800";
-
-		/* Always on when ppvar_sys shows power good */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300: pp3300 {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300";
-
-		/* Always on; plain and simple */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp5000: pp5000 {
-		compatible = "regulator-fixed";
-		regulator-name = "pp5000";
-
-		/* EC turns on w/ pp5000_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
-		compatible = "pwm-regulator";
-		regulator-name = "ppvar_bigcpu_pwm";
-
-		pwms = <&pwm1 0 3337 0>;
-		pwm-supply = <&ppvar_sys>;
-		pwm-dutycycle-range = <100 0>;
-		pwm-dutycycle-unit = <100>;
-
-		/* EC turns on w/ ap_core_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800107>;
-		regulator-max-microvolt = <1302232>;
-	};
-
-	ppvar_bigcpu: ppvar-bigcpu {
-		compatible = "vctrl-regulator";
-		regulator-name = "ppvar_bigcpu";
-
-		regulator-min-microvolt = <800107>;
-		regulator-max-microvolt = <1302232>;
-
-		ctrl-supply = <&ppvar_bigcpu_pwm>;
-		ctrl-voltage-range = <800107 1302232>;
-
-		regulator-settling-time-up-us = <322>;
-	};
-
-	ppvar_litcpu_pwm: ppvar-litcpu-pwm {
-		compatible = "pwm-regulator";
-		regulator-name = "ppvar_litcpu_pwm";
-
-		pwms = <&pwm2 0 3337 0>;
-		pwm-supply = <&ppvar_sys>;
-		pwm-dutycycle-range = <100 0>;
-		pwm-dutycycle-unit = <100>;
-
-		/* EC turns on w/ ap_core_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <797743>;
-		regulator-max-microvolt = <1307837>;
-	};
-
-	ppvar_litcpu: ppvar-litcpu {
-		compatible = "vctrl-regulator";
-		regulator-name = "ppvar_litcpu";
-
-		regulator-min-microvolt = <797743>;
-		regulator-max-microvolt = <1307837>;
-
-		ctrl-supply = <&ppvar_litcpu_pwm>;
-		ctrl-voltage-range = <797743 1307837>;
-
-		regulator-settling-time-up-us = <384>;
-	};
-
-	ppvar_gpu_pwm: ppvar-gpu-pwm {
-		compatible = "pwm-regulator";
-		regulator-name = "ppvar_gpu_pwm";
-
-		pwms = <&pwm0 0 3337 0>;
-		pwm-supply = <&ppvar_sys>;
-		pwm-dutycycle-range = <100 0>;
-		pwm-dutycycle-unit = <100>;
-
-		/* EC turns on w/ ap_core_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <786384>;
-		regulator-max-microvolt = <1217747>;
-	};
-
-	ppvar_gpu: ppvar-gpu {
-		compatible = "vctrl-regulator";
-		regulator-name = "ppvar_gpu";
-
-		regulator-min-microvolt = <786384>;
-		regulator-max-microvolt = <1217747>;
-
-		ctrl-supply = <&ppvar_gpu_pwm>;
-		ctrl-voltage-range = <786384 1217747>;
-
-		regulator-settling-time-up-us = <390>;
-	};
-
-	/* EC turns on w/ pp900_ddrpll_en */
-	pp900_ddrpll: pp900-ap {
-	};
-
-	/* EC turns on w/ pp900_pll_en */
-	pp900_pll: pp900-ap {
-	};
-
-	/* EC turns on w/ pp900_pmu_en */
-	pp900_pmu: pp900-ap {
-	};
-
-	/* EC turns on w/ pp1800_s0_en_l */
-	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
-	};
-
-	/* EC turns on w/ pp1800_avdd_en_l */
-	pp1800_avdd: pp1800 {
-	};
-
-	/* EC turns on w/ pp1800_lid_en_l */
-	pp1800_lid: pp1800_mic: pp1800 {
-	};
-
-	/* EC turns on w/ lpddr_pwr_en */
-	pp1800_lpddr: pp1800 {
-	};
-
-	/* EC turns on w/ pp1800_pmu_en_l */
-	pp1800_pmu: pp1800 {
-	};
-
-	/* EC turns on w/ pp1800_usb_en_l */
-	pp1800_usb: pp1800 {
-	};
-
-	pp3000_sd_slot: pp3000-sd-slot {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3000_sd_slot";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd_slot_pwr_en>;
-
-		enable-active-high;
-		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-
-		vin-supply = <&pp3000>;
-	};
-
-	/*
-	 * Technically, this is a small abuse of 'regulator-gpio'; this
-	 * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are
-	 * always on though, so it is sufficient to simply control the mux
-	 * here.
-	 */
-	ppvar_sd_card_io: ppvar-sd-card-io {
-		compatible = "regulator-gpio";
-		regulator-name = "ppvar_sd_card_io";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
-
-		enable-active-high;
-		enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1>,
-			 <3000000 0x0>;
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	/* EC turns on w/ pp3300_trackpad_en_l */
-	pp3300_trackpad: pp3300-trackpad {
-	};
-
-	/* EC turns on w/ usb_a_en */
-	pp5000_usb_a_vbus: pp5000 {
-	};
-
-	ap_rtc_clk: ap-rtc-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "xin32k";
-		#clock-cells = <0>;
-	};
-
-	max98357a: max98357a {
-		compatible = "maxim,max98357a";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmode_en>;
-		sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		sdmode-delay = <2>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-	};
-
-	sound: sound {
-		compatible = "rockchip,rk3399-gru-sound";
-		rockchip,cpu = <&i2s0 &spdif>;
-	};
-};
-
-&cdn_dp {
-	status = "okay";
-};
-
-/*
- * Set some suspend operating points to avoid OVP in suspend
- *
- * When we go into S3 ARM Trusted Firmware will transition our PWM regulators
- * from wherever they're at back to the "default" operating point (whatever
- * voltage we get when we set the PWM pins to "input").
- *
- * This quick transition under light load has the possibility to trigger the
- * regulator "over voltage protection" (OVP).
- *
- * To make extra certain that we don't hit this OVP at suspend time, we'll
- * transition to a voltage that's much closer to the default (~1.0 V) so that
- * there will not be a big jump.  Technically we only need to get within 200 mV
- * of the default voltage, but the speed here should be fast enough and we need
- * suspend/resume to be rock solid.
- */
-
-&cluster0_opp {
-	opp05 {
-		opp-suspend;
-	};
-};
-
-&cluster1_opp {
-	opp06 {
-		opp-suspend;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&ppvar_bigcpu>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&ppvar_bigcpu>;
-};
-
-
-&cru {
-	assigned-clocks =
-		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
-		<&cru PLL_NPLL>,
-		<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
-		<&cru PCLK_PERIHP>,
-		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
-		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
-		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
-		<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
-		<&cru ACLK_GIC_PRE>,
-		<&cru PCLK_DDR>;
-	assigned-clock-rates =
-		<600000000>, <800000000>,
-		<1000000000>,
-		<150000000>, <75000000>,
-		<37500000>,
-		<100000000>, <100000000>,
-		<50000000>, <800000000>,
-		<100000000>, <50000000>,
-		<400000000>, <400000000>,
-		<200000000>,
-		<200000000>;
-};
-
-&dfi {
-	status = "okay";
-};
-
-&dmc {
-	status = "okay";
-
-	rockchip,pd-idle-ns = <160>;
-	rockchip,sr-idle-ns = <10240>;
-	rockchip,sr-mc-gate-idle-ns = <40960>;
-	rockchip,srpd-lite-idle-ns = <61440>;
-	rockchip,standby-idle-ns = <81920>;
-
-	rockchip,ddr3_odt_dis_freq = <666000000>;
-	rockchip,lpddr3_odt_dis_freq = <666000000>;
-	rockchip,lpddr4_odt_dis_freq = <666000000>;
-
-	rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
-	rockchip,srpd-lite-idle-dis-freq-hz = <0>;
-	rockchip,standby-idle-dis-freq-hz = <928000000>;
-};
-
-&dmc_opp_table {
-	opp03 {
-		opp-suspend;
-	};
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&ppvar_gpu>;
-	status = "okay";
-};
-
-ap_i2c_ts: &i2c3 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-};
-
-ap_i2c_audio: &i2c8 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	codec: da7219@1a {
-		compatible = "dlg,da7219";
-		reg = <0x1a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&cru SCLK_I2S_8CH_OUT>;
-		clock-names = "mclk";
-		dlg,micbias-lvl = <2600>;
-		dlg,mic-amp-in-sel = "diff";
-		pinctrl-names = "default";
-		pinctrl-0 = <&headset_int_l>;
-		VDD-supply = <&pp1800>;
-		VDDMIC-supply = <&pp3300>;
-		VDDIO-supply = <&pp1800>;
-
-		da7219_aad {
-			dlg,adc-1bit-rpt = <1>;
-			dlg,btn-avg = <4>;
-			dlg,btn-cfg = <50>;
-			dlg,mic-det-thr = <500>;
-			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
-			dlg,jack-rem-deb = <1>;
-
-			dlg,a-d-btn-thr = <0xa>;
-			dlg,d-b-btn-thr = <0x16>;
-			dlg,b-c-btn-thr = <0x21>;
-			dlg,c-mic-btn-thr = <0x3E>;
-		};
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	audio-supply = <&pp1800_audio>;		/* APIO5_VDD;  3d 4a */
-	bt656-supply = <&pp1800_ap_io>;		/* APIO2_VDD;  2a 2b */
-	gpio1830-supply = <&pp3000_ap>;		/* APIO4_VDD;  4c 4d */
-	sdmmc-supply = <&ppvar_sd_card_io>;	/* SDMMC0_VDD; 4b    */
-};
-
-&pcie0 {
-	status = "okay";
-
-	ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
-	vpcie3v3-supply = <&pp3300_wifi_bt>;
-	vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
-	vpcie0v9-supply = <&pp900_pcie>;
-
-	pci_rootport: pcie@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-		device_type = "pci";
-	};
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pmu_io_domains {
-	status = "okay";
-
-	pmu1830-supply = <&pp1800_pmu>;		/* PMUIO2_VDD */
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&sdhci {
-	/*
-	 * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
-	 * same (or nearly the same) performance for all eMMC that are intended
-	 * to be used.
-	 */
-	assigned-clock-rates = <150000000>;
-
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&sdmmc {
-	status = "okay";
-
-	/*
-	 * Note: configure "sdmmc_cd" as card detect even though it's actually
-	 * hooked to ground.  Because we specified "cd-gpios" below dw_mmc
-	 * should be ignoring card detect anyway.  Specifying the pin as
-	 * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag)
-	 * turned on that the system will still make sure the port is
-	 * configured as SDMMC and not JTAG.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
-		     &sdmmc_bus4>;
-
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	vmmc-supply = <&pp3000_sd_slot>;
-	vqmmc-supply = <&ppvar_sd_card_io>;
-};
-
-&spdif {
-	status = "okay";
-
-	/*
-	 * SPDIF is routed internally to DP; we either don't use these pins, or
-	 * mux them to something else.
-	 */
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-};
-
-&spi1 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-1 = <&spi1_sleep>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-
-		/* May run faster once verified. */
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&spi2 {
-	status = "okay";
-};
-
-&spi5 {
-	status = "okay";
-
-	cros_ec: ec@0 {
-		compatible = "google,cros-ec-spi";
-		reg = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_ap_int_l>;
-		spi-max-frequency = <3000000>;
-
-		i2c_tunnel: i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			google,remote-bus = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		usbc_extcon0: extcon0 {
-			compatible = "google,extcon-usbc-cros-ec";
-			google,usb-port-id = <0>;
-		};
-	};
-};
-
-&tsadc {
-	status = "okay";
-
-	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
-};
-
-&tcphy0 {
-	status = "okay";
-	extcon = <&usbc_extcon0>;
-};
-
-&u2phy0 {
-	status = "okay";
-};
-
-&u2phy0_host {
-	status = "okay";
-};
-
-&u2phy1_host {
-	status = "okay";
-};
-
-&u2phy0_otg {
-	status = "okay";
-};
-
-&u2phy1_otg {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-	extcon = <&usbc_extcon0>;
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
-
-#include <cros-ec-keyboard.dtsi>
-#include <cros-ec-sbs.dtsi>
-
-&pinctrl {
-	/*
-	 * pinctrl settings for pins that have no real owners.
-	 *
-	 * At the moment settings are identical for S0 and S3, but if we later
-	 * need to configure things differently for S3 we'll adjust here.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&ap_pwroff	/* AP will auto-assert this when in S3 */
-		&clk_32k	/* This pin is always 32k on gru boards */
-	>;
-
-	pcfg_output_low: pcfg-output-low {
-		output-low;
-	};
-
-	pcfg_output_high: pcfg-output-high {
-		output-high;
-	};
-
-	pcfg_pull_none_8ma: pcfg-pull-none-8ma {
-		bias-disable;
-		drive-strength = <8>;
-	};
-
-	backlight-enable {
-		bl_en: bl-en {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	cros-ec {
-		ec_ap_int_l: ec-ap-int-l {
-			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	discrete-regulators {
-		sd_io_pwr_en: sd-io-pwr-en {
-			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		sd_pwr_1800_sel: sd-pwr-1800-sel {
-			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		sd_slot_pwr_en: sd-slot-pwr-en {
-			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-	};
-
-	codec {
-		/* Has external pullup */
-		headset_int_l: headset-int-l {
-			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		mic_int: mic-int {
-			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	max98357a {
-		sdmode_en: sdmode-en {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	pcie {
-		pcie_clkreqn_cpm: pci-clkreqn-cpm {
-			/*
-			 * Since our pcie doesn't support ClockPM(CPM), we want
-			 * to hack this as gpio, so the EP could be able to
-			 * de-assert it along and make ClockPM(CPM) work.
-			 */
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdmmc {
-		/*
-		 * We run sdmmc at max speed; bump up drive strength.
-		 * We also have external pulls, so disable the internal ones.
-		 */
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins =
-				<4 RK_PB0 1 &pcfg_pull_none_8ma>,
-				<4 RK_PB1 1 &pcfg_pull_none_8ma>,
-				<4 RK_PB2 1 &pcfg_pull_none_8ma>,
-				<4 RK_PB3 1 &pcfg_pull_none_8ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins =
-				<4 RK_PB4 1 &pcfg_pull_none_8ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins =
-				<4 RK_PB5 1 &pcfg_pull_none_8ma>;
-		};
-
-		/*
-		 * In our case the official card detect is hooked to ground
-		 * to avoid getting access to JTAG just by sticking something
-		 * in the SD card slot (see the force_jtag bit in the TRM).
-		 *
-		 * We still configure it as card detect because it doesn't
-		 * hurt and dw_mmc will ignore it.  We make sure to disable
-		 * the pull though so we don't burn needless power.
-		 */
-		sdmmc_cd: sdmmc-cd {
-			rockchip,pins =
-				<0 RK_PA7 1 &pcfg_pull_none>;
-		};
-
-		/* This is where we actually hook up CD; has external pull */
-		sdmmc_cd_pin: sdmmc-cd-pin {
-			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	spi1 {
-		spi1_sleep: spi1-sleep {
-			/*
-			 * Pull down SPI1 CLK/CS/RX/TX during suspend, to
-			 * prevent leakage.
-			 */
-			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	touchscreen {
-		touch_int_l: touch-int-l {
-			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		touch_reset_l: touch-reset-l {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	trackpad {
-		ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
-			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-
-		trackpad_int_l: trackpad-int-l {
-			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	wifi: wifi {
-		wlan_module_reset_l: wlan-module-reset-l {
-			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			/* Kevin has an external pull up, but Gru does not */
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	write-protect {
-		ap_fw_wp: ap-fw-wp {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
diff --git a/arch/arm/dts/rk3399-khadas-edge-captain.dts b/arch/arm/dts/rk3399-khadas-edge-captain.dts
deleted file mode 100644
index 99ac4ed0f13f..000000000000
--- a/arch/arm/dts/rk3399-khadas-edge-captain.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include "rk3399-khadas-edge.dtsi"
-
-/ {
-	model = "Khadas Edge-Captain";
-	compatible = "khadas,edge-captain", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-	};
-};
-
-&gmac {
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-khadas-edge-v.dts b/arch/arm/dts/rk3399-khadas-edge-v.dts
deleted file mode 100644
index e12e7b4d64ca..000000000000
--- a/arch/arm/dts/rk3399-khadas-edge-v.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include "rk3399-khadas-edge.dtsi"
-
-/ {
-	model = "Khadas Edge-V";
-	compatible = "khadas,edge-v", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-	};
-};
-
-&gmac {
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-khadas-edge.dts b/arch/arm/dts/rk3399-khadas-edge.dts
deleted file mode 100644
index 31616e7ad89d..000000000000
--- a/arch/arm/dts/rk3399-khadas-edge.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include "rk3399-khadas-edge.dtsi"
-
-/ {
-	model = "Khadas Edge";
-	compatible = "khadas,edge", "rockchip,rk3399";
-};
diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi
deleted file mode 100644
index 9d9297bc5f04..000000000000
--- a/arch/arm/dts/rk3399-khadas-edge.dtsi
+++ /dev/null
@@ -1,837 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_pcie";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vsys_3v3>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vsys_5v0>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vsys_3v3>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-	};
-
-	vsys: vsys {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vsys_3v3: vsys-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_3v3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vsys>;
-	};
-
-	vsys_5v0: vsys-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_5v0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vsys>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <18000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		key-power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
-		linux,rc-map-name = "rc-khadas";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_rx>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
-
-		sys_led: led-0 {
-			label = "sys_led";
-			linux,default-trigger = "heartbeat";
-			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-		};
-
-		user_led: led-1 {
-			label = "user_led";
-			default-state = "off";
-			gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 150 200 255>;
-		#cooling-cells = <2>;
-		fan-supply = <&vsys_5v0>;
-		pwms = <&pwm0 0 40000 0>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_thermal {
-	trips {
-		cpu_warm: cpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		cpu_hot: cpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-
-	cooling-maps {
-		map2 {
-			trip = <&cpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map3 {
-			trip = <&cpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&gpu_thermal {
-	trips {
-		gpu_warm: gpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		gpu_hot: gpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-
-	cooling-maps {
-		map1 {
-			trip = <&gpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map2 {
-			trip = <&gpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vsys_3v3>;
-		vcc2-supply = <&vsys_3v3>;
-		vcc3-supply = <&vsys_3v3>;
-		vcc4-supply = <&vsys_3v3>;
-		vcc6-supply = <&vsys_3v3>;
-		vcc7-supply = <&vsys_3v3>;
-		vcc8-supply = <&vsys_3v3>;
-		vcc9-supply = <&vsys_3v3>;
-		vcc10-supply = <&vsys_3v3>;
-		vcc11-supply = <&vsys_3v3>;
-		vcc12-supply = <&vsys_3v3>;
-		vddio-supply = <&vcc_1v8>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_apio2: LDO_REG1 {
-				regulator-name = "vcc1v8_apio2";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_vldo2: LDO_REG2 {
-				regulator-name = "vcc_vldo2";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmupll: LDO_REG3 {
-				regulator-name = "vcc1v8_pmupll";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vccio_sd: LDO_REG4 {
-				regulator-name = "vccio_sd";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc_vldo5: LDO_REG5 {
-				regulator-name = "vcc_vldo5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcc1v8_codec: LDO_REG7 {
-				regulator-name = "vcc1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cpu_b_sleep>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vsys_3v3>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpu_sleep>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vsys_3v3>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c8 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <160>;
-	i2c-scl-falling-time-ns = <30>;
-	status = "okay";
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	bt656-supply = <&vcc1v8_apio2>;
-	audio-supply = <&vcc1v8_codec>;
-	sdmmc-supply = <&vccio_sd>;
-	gpio1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&pinctrl {
-	bt {
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_reg_on_h: bt-reg-on-h {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	ir {
-		ir_rx: ir-rx {
-		    rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	leds {
-		sys_led_pin: sys-led-pin {
-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led_pin: user-led-pin {
-			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		cpu_b_sleep: cpu-b-sleep {
-			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		gpu_sleep: gpu-sleep {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wifi {
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdio0 {
-	/* WiFi & BT combo module Ampak AP6356S */
-	bus-width = <4>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	vqmmc-supply = <&vcc1v8_s3>;
-	vmmc-supply = <&vccio_sd>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		brcm,drive-strength = <5>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	spiflash: flash@0 {
-		compatible = "winbond,w25q128fw", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		max-speed = <4000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
-		vbat-supply = <&vsys_3v3>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "otg";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts
deleted file mode 100644
index cb69e2145fa9..000000000000
--- a/arch/arm/dts/rk3399-leez-p710.dts
+++ /dev/null
@@ -1,653 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Leez RK3399 P710";
-	compatible = "leez,p710", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_reg_on_h>;
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	dc5v_adp: dc5v-adp {
-		compatible = "regulator-fixed";
-		regulator-name = "dc5v_adapter";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc3v3_lan: vcc3v3-lan {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_lan";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_host";
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-min-microvolt = <5500000>;
-		regulator-max-microvolt = <5500000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_host3: vcc5v0-host3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_host3";
-		enable-active-high;
-		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host3_en>;
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc5v_adp>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc5v0_sys>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc3v3_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c7>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc5v0_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_hdmi: LDO_REG2 {
-				regulator-name = "vcc1v8_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca_1v8: LDO_REG3 {
-				regulator-name = "vcca_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vccio_sd: LDO_REG4 {
-				regulator-name = "vccio_sd";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcc0v9_hdmi: LDO_REG7 {
-				regulator-name = "vcc0v9_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_pin>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_pin>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	bt656-supply = <&vcc1v8_dvp>;
-	audio-supply = <&vcc_1v8>;
-	sdmmc-supply = <&vccio_sd>;
-	gpio1830-supply = <&vcc_3v0>;
-};
-
-&pmu_io_domains {
-	status = "okay";
-	pmu1830-supply = <&vcc_3v0>;
-};
-
-&pinctrl {
-	bt {
-		bt_reg_on_h: bt-reg-on-h {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host3_en: vcc5v0-host3-en {
-			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wifi {
-		wifi_reg_on_h: wifi-reg-on-h {
-			rockchip,pins =
-				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	status = "okay";
-
-	vref-supply = <&vcc_1v8>;
-};
-
-&sdio0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	bus-width = <4>;
-	clock-frequency = <50000000>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	status = "okay";
-
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host0>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host1>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "otg";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
deleted file mode 100644
index 3bf8f959e42c..000000000000
--- a/arch/arm/dts/rk3399-nanopc-t4.dts
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPC-T4 board device tree source
- *
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- */
-
-/dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPC-T4";
-	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
-
-	vcc12v0_sys: vcc12v0-sys {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-max-microvolt = <12000000>;
-		regulator-min-microvolt = <12000000>;
-		regulator-name = "vcc12v0_sys";
-	};
-
-	vcc5v0_host0: vcc5v0-host0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-name = "vcc5v0_host0";
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <18000>;
-		};
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_rx>;
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		/*
-		 * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
-		 * work out to 0, ~1200, ~3000, and 5000RPM respectively.
-		 */
-		cooling-levels = <0 12 18 255>;
-		#cooling-cells = <2>;
-		fan-supply = <&vcc12v0_sys>;
-		pwms = <&pwm1 0 50000 0>;
-	};
-};
-
-&cpu_thermal {
-	trips {
-		cpu_warm: cpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		cpu_hot: cpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-
-	cooling-maps {
-		map2 {
-			trip = <&cpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map3 {
-			trip = <&cpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
-&pcie0 {
-	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	vpcie3v3-supply = <&vcc3v3_sys>;
-};
-
-&pinctrl {
-	ir {
-		ir_rx: ir-rx {
-			/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
-			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
-		};
-	};
-};
-
-&sdhci {
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_host0>;
-};
-
-&u2phy1_host {
-	phy-supply = <&vcc5v0_host0>;
-};
-
-&vcc5v0_sys {
-	vin-supply = <&vcc12v0_sys>;
-};
-
-&vcc3v3_sys {
-	vin-supply = <&vcc12v0_sys>;
-};
-
-&vbus_typec {
-	enable-active-high;
-	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-	vin-supply = <&vcc5v0_sys>;
-};
diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts
deleted file mode 100644
index 60358ab8c7df..000000000000
--- a/arch/arm/dts/rk3399-nanopi-m4.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPi M4 board device tree source
- *
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2019 Arm Ltd.
- */
-
-/dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPi M4";
-	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
-
-	vdd_5v: vdd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc5v0_core: vcc5v0-core {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_core";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_5v>;
-	};
-
-	vcc5v0_usb1: vcc5v0-usb1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb1";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_usb2: vcc5v0-usb2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb2";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&vcc3v3_sys {
-	vin-supply = <&vcc5v0_core>;
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_usb1>;
-};
-
-&u2phy1_host {
-	phy-supply = <&vcc5v0_usb2>;
-};
-
-&vbus_typec {
-	regulator-always-on;
-	vin-supply = <&vdd_5v>;
-};
diff --git a/arch/arm/dts/rk3399-nanopi-m4b.dts b/arch/arm/dts/rk3399-nanopi-m4b.dts
deleted file mode 100644
index 65cb21837b0c..000000000000
--- a/arch/arm/dts/rk3399-nanopi-m4b.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPi M4B board device tree source
- *
- * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org>
- */
-
-/dts-v1/;
-#include "rk3399-nanopi-m4.dts"
-
-/ {
-	model = "FriendlyElec NanoPi M4B";
-	compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1500000>;
-		poll-interval = <100>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <18000>;
-		};
-	};
-};
-
-/* No USB type-C PD power manager */
-/delete-node/ &fusb0;
-
-&i2c4 {
-	status = "disabled";
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_usb2>;
-};
-
-&u2phy0_otg {
-	phy-supply = <&vbus_typec>;
-};
-
-&u2phy1_otg {
-	phy-supply = <&vcc5v0_usb1>;
-};
-
-&vbus_typec {
-	enable-active-high;
-	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts
deleted file mode 100644
index 195410b089b9..000000000000
--- a/arch/arm/dts/rk3399-nanopi-neo4.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
-
-/dts-v1/;
-
-#include "rk3399-nanopi4.dtsi"
-
-/ {
-	model = "FriendlyARM NanoPi NEO4";
-	compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
-
-	vdd_5v: vdd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc5v0_core: vcc5v0-core {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_core";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_5v>;
-	};
-
-	vcc5v0_usb1: vcc5v0-usb1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb1";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&vcc3v3_sys {
-	vin-supply = <&vcc5v0_core>;
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_usb1>;
-};
-
-&vbus_typec {
-	regulator-always-on;
-	vin-supply = <&vdd_5v>;
-};
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
deleted file mode 100644
index fe5b52610010..000000000000
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPC-T4 board device tree source
- *
- * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- *
- * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
- * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
- * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
- */
-
-/dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPi R4S";
-	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
-
-	/delete-node/ display-subsystem;
-
-	gpio-leds {
-		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-
-		/delete-node/ led-0;
-
-		lan_led: led-lan {
-			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
-			label = "green:lan";
-		};
-
-		sys_led: led-sys {
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-			label = "red:power";
-			default-state = "on";
-		};
-
-		wan_led: led-wan {
-			gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-			label = "green:wan";
-		};
-	};
-
-	gpio-keys {
-		pinctrl-0 = <&reset_button_pin>;
-
-		/delete-node/ key-power;
-
-		key-reset {
-			debounce-interval = <50>;
-			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	vdd_5v: vdd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&emmc_phy {
-	status = "disabled";
-};
-
-&i2c4 {
-	status = "disabled";
-};
-
-&pcie0 {
-	max-link-speed = <1>;
-	num-lanes = <1>;
-	vpcie3v3-supply = <&vcc3v3_sys>;
-};
-
-&pinctrl {
-	gpio-leds {
-		/delete-node/ status-led-pin;
-
-		lan_led_pin: lan-led-pin {
-			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		sys_led_pin: sys-led-pin {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wan_led_pin: wan-led-pin {
-			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	rockchip-key {
-		/delete-node/ power-key;
-
-		reset_button_pin: reset-button-pin {
-			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&sdhci {
-	status = "disabled";
-};
-
-&sdio0 {
-	status = "disabled";
-};
-
-&u2phy0_host {
-	phy-supply = <&vdd_5v>;
-};
-
-&u2phy1_host {
-	status = "disabled";
-};
-
-&uart0 {
-	status = "disabled";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-&vcc3v3_sys {
-	vin-supply = <&vcc5v0_sys>;
-};
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
deleted file mode 100644
index b7f1e47978a6..000000000000
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ /dev/null
@@ -1,762 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * RK3399-based FriendlyElec boards device tree source
- *
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2019 Arm Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "vcc3v3_sys";
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-name = "vcc5v0_sys";
-		vin-supply = <&vdd_5v>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-name = "vcc1v8_s3";
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v0_sd: vcc3v0-sd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h>;
-		regulator-always-on;
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		regulator-name = "vcc3v0_sd";
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	/*
-	 * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
-	 * drives the enable pin, but we can't quite model that.
-	 */
-	vcca0v9_s3: vcca0v9-s3 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		regulator-name = "vcca0v9_s3";
-		vin-supply = <&vcc1v8_s3>;
-	};
-
-	/* As above, actually supplied by vcc3v3_sys */
-	vcca1v8_s3: vcca1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-name = "vcca1v8_s3";
-		vin-supply = <&vcc1v8_s3>;
-	};
-
-	vbus_typec: vbus-typec {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-name = "vbus_typec";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key>;
-
-		key-power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&status_led_pin>;
-
-		status_led: led-0 {
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-			label = "status_led";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_reg_on_h>;
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&emmc_phy {
-	rockchip,enable-strobe-pulldown;
-	status = "okay";
-};
-
-&gmac {
-	assigned-clock-parents = <&clkin_gmac>;
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	clock_in_out = "input";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
-	phy-handle = <&rtl8211e>;
-	phy-mode = "rgmii";
-	phy-supply = <&vcc3v3_s3>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtl8211e: ethernet-phy@1 {
-			reg = <1>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
-			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c7>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <160>;
-	i2c-scl-falling-time-ns = <30>;
-	status = "okay";
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cpu_b_sleep>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-name = "vdd_cpu_b";
-		regulator-ramp-delay = <1000>;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpu_sleep>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-name = "vdd_gpu";
-		regulator-ramp-delay = <1000>;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		clock-output-names = "xin32k", "rtc_clko_wifi";
-		#clock-cells = <1>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		vcc10-supply = <&vcc3v3_sys>;
-		vcc11-supply = <&vcc3v3_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_3v0>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-name = "vdd_center";
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-name = "vdd_cpu_l";
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_cam: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc1v8_cam";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v0_touch: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "vcc3v0_touch";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmupll: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc1v8_pmupll";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_sdio";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "vcca3v0_codec";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-name = "vcc_1v5";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcca1v8_codec";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "vcc_3v0";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc3v3_s3";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc3v3_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <200000>;
-	i2c-scl-rising-time-ns = <150>;
-	i2c-scl-falling-time-ns = <30>;
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <160>;
-	i2c-scl-falling-time-ns = <30>;
-	status = "okay";
-
-	fusb0: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vbus_typec>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	bt656-supply = <&vcc_1v8>;
-	audio-supply = <&vcca1v8_codec>;
-	sdmmc-supply = <&vcc_sdio>;
-	gpio1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pcie_phy {
-	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
-	assigned-clock-rates = <100000000>;
-	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
-	status = "okay";
-};
-
-&pcie0 {
-	num-lanes = <2>;
-	vpcie0v9-supply = <&vcca0v9_s3>;
-	vpcie1v8-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&pinctrl {
-	fusb30x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	gpio-leds {
-		status_led_pin: status-led-pin {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	gmac {
-		phy_intb: phy-intb {
-			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_rstb: phy-rstb {
-			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		cpu_b_sleep: cpu-b-sleep {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		gpu_sleep: gpu-sleep {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	rockchip-key {
-		power_key: power-key {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	sdio {
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_reg_on_h: bt-reg-on-h {
-			/* external pullup to VCC1V8_PMUPLL */
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wifi_reg_on_h: wifi-reg_on-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdmmc {
-		sdmmc0_det_l: sdmmc0-det-l {
-			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		sdmmc0_pwr_h: sdmmc0-pwr-h {
-			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "active";
-	pinctrl-0 = <&pwm2_pin_pull_down>;
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc3v0_sd>;
-	vqmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-};
-
-&u2phy0_host {
-	status = "okay";
-};
-
-&u2phy0_otg {
-	status = "okay";
-};
-
-&u2phy1 {
-	status = "okay";
-};
-
-&u2phy1_host {
-	status = "okay";
-};
-
-&u2phy1_otg {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		max-speed = <4000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-op1-opp.dtsi b/arch/arm/dts/rk3399-op1-opp.dtsi
deleted file mode 100644
index 783120e9cebe..000000000000
--- a/arch/arm/dts/rk3399-op1-opp.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/ {
-	cluster0_opp: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <800000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <825000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <850000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <900000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <975000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1100000>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <1512000000>;
-			opp-microvolt = <1150000>;
-		};
-	};
-
-	cluster1_opp: opp-table-1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <800000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <800000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <825000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <850000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <900000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <975000>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <1050000>;
-		};
-		opp07 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1150000>;
-		};
-		opp08 {
-			opp-hz = /bits/ 64 <2016000000>;
-			opp-microvolt = <1250000>;
-		};
-	};
-
-	gpu_opp_table: opp-table-2 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <800000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <297000000>;
-			opp-microvolt = <800000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <825000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <850000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <925000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1075000>;
-		};
-	};
-
-	dmc_opp_table: opp-table-3 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <900000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <666000000>;
-			opp-microvolt = <900000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <900000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <928000000>;
-			opp-microvolt = <925000>;
-		};
-	};
-};
-
-&cpu_l0 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l1 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l2 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l3 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_b0 {
-	operating-points-v2 = <&cluster1_opp>;
-};
-
-&cpu_b1 {
-	operating-points-v2 = <&cluster1_opp>;
-};
-
-&dmc {
-	operating-points-v2 = <&dmc_opp_table>;
-};
-
-&gpu {
-	operating-points-v2 = <&gpu_opp_table>;
-};
diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi
deleted file mode 100644
index fee5e7111279..000000000000
--- a/arch/arm/dts/rk3399-opp.dtsi
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/ {
-	cluster0_opp: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <825000 825000 1250000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <825000 825000 1250000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <850000 850000 1250000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <925000 925000 1250000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1000000 1000000 1250000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1125000 1125000 1250000>;
-		};
-	};
-
-	cluster1_opp: opp-table-1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <825000 825000 1250000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <825000 825000 1250000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <825000 825000 1250000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <875000 875000 1250000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <950000 950000 1250000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1025000 1025000 1250000>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <1100000 1100000 1250000>;
-		};
-		opp07 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1200000 1200000 1250000>;
-		};
-	};
-
-	gpu_opp_table: opp-table-2 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <825000 825000 1150000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <297000000>;
-			opp-microvolt = <825000 825000 1150000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <825000 825000 1150000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <875000 875000 1150000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <925000 925000 1150000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1100000 1100000 1150000>;
-		};
-	};
-};
-
-&cpu_l0 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l1 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l2 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l3 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_b0 {
-	operating-points-v2 = <&cluster1_opp>;
-};
-
-&cpu_b1 {
-	operating-points-v2 = <&cluster1_opp>;
-};
-
-&gpu {
-	operating-points-v2 = <&gpu_opp_table>;
-};
diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
deleted file mode 100644
index e7551449e718..000000000000
--- a/arch/arm/dts/rk3399-orangepi.dts
+++ /dev/null
@@ -1,896 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- */
-
-/dts-v1/;
-
-#include "dt-bindings/pwm/pwm.h"
-#include "dt-bindings/input/input.h"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "dt-bindings/usb/pd.h"
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Orange Pi RK3399 Board";
-	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <100000>;
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <300000>;
-		};
-
-		button-back {
-			label = "Back";
-			linux,code = <KEY_BACK>;
-			press-threshold-microvolt = <985000>;
-		};
-
-		button-menu {
-			label = "Menu";
-			linux,code = <KEY_MENU>;
-			press-threshold-microvolt = <1314000>;
-		};
-	};
-
-	dc_12v: dc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		key-power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Power";
-			linux,code = <KEY_POWER>;
-			linux,input-type = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwr_btn>;
-			wakeup-source;
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_reg_on_h>;
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v0_sd: vcc3v0-sd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h>;
-		regulator-boot-on;
-		regulator-max-microvolt = <3000000>;
-		regulator-min-microvolt = <3000000>;
-		regulator-name = "vcc3v0_sd";
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vbus_typec: vbus-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec_en>;
-		regulator-name = "vbus_typec";
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_sys: vcc-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc_sys>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc3v3_s3>;
-	phy-mode = "rgmii";
-	phy-handle = <&rtl8211e>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtl8211e: ethernet-phy@1 {
-			reg = <1>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
-			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		vcc10-supply = <&vcc3v3_sys>;
-		vcc11-supply = <&vcc3v3_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_3v0>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v0_tp: LDO_REG2 {
-				regulator-name = "vcc3v0_tp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmupll: LDO_REG3 {
-				regulator-name = "vcc1v8_pmupll";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cpu_b_sleep>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpu_sleep>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-
-	ak09911@c {
-		compatible = "asahi-kasei,ak09911";
-		reg = <0x0c>;
-		vdd-supply = <&vcc3v3_s3>;
-		vid-supply = <&vcc3v3_s3>;
-	};
-
-	mpu6500@68 {
-		compatible = "invensense,mpu6500";
-		reg = <0x68>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gsensor_int_l>;
-		vddio-supply = <&vcc3v3_s3>;
-	};
-
-	lsm6ds3@6a {
-		compatible = "st,lsm6ds3";
-		reg = <0x6a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gyr_int_l>;
-		vdd-supply = <&vcc3v3_s3>;
-		vddio-supply = <&vcc3v3_s3>;
-	};
-
-	cm32181@10 {
-		compatible = "capella,cm32181";
-		reg = <0x10>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&light_int_l>;
-		vdd-supply = <&vcc3v3_s3>;
-	};
-
-	fusb302@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&chg_cc_int_l>;
-		vbus-supply = <&vbus_typec>;
-
-		typec_con: connector {
-			compatible = "usb-c-connector";
-			data-role = "host";
-			label = "USB-C";
-			op-sink-microwatt = <1000000>;
-			power-role = "dual";
-			sink-pdos =
-				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
-			source-pdos =
-				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
-			try-power-role = "sink";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					typec_hs: endpoint {
-						remote-endpoint = <&u2phy0_typec_hs>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					typec_ss: endpoint {
-						remote-endpoint = <&tcphy0_typec_ss>;
-					};
-				};
-				port@2 {
-					reg = <2>;
-					typec_dp: endpoint {
-						remote-endpoint = <&tcphy0_typec_dp>;
-					};
-				};
-			};
-		};
-	};
-};
-
-&io_domains {
-	status = "okay";
-	bt656-supply = <&vcc_3v0>;
-	audio-supply = <&vcca1v8_codec>;
-	sdmmc-supply = <&vcc_sdio>;
-	gpio1830-supply = <&vcc_3v0>;
-};
-
-&pmu_io_domains {
-	status = "okay";
-	pmu1830-supply = <&vcc_3v0>;
-};
-
-&pinctrl {
-	buttons {
-		pwr_btn: pwr-btn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	gmac {
-		phy_intb: phy-intb {
-			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_rstb: phy-rstb {
-			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		cpu_b_sleep: cpu-b-sleep {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		gpu_sleep: gpu-sleep {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	sd {
-		sdmmc0_pwr_h: sdmmc0-pwr-h {
-			rockchip,pins =
-				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins =
-				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc5v0_typec_en: vcc5v0-typec-en {
-			rockchip,pins =
-				<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_reg_on_h: wifi-reg-on-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wifi {
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	bluetooth {
-		bt_reg_on_h: bt-enable-h {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	mpu6500 {
-		gsensor_int_l: gsensor-int-l {
-			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	lsm6ds3 {
-		gyr_int_l: gyr-int-l {
-			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	cm32181 {
-		light_int_l: light-int-l {
-			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	fusb302 {
-		chg_cc_int_l: chg-cc-int-l {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	clock-frequency = <50000000>;
-	disable-wp;
-	keep-power-in-suspend;
-	max-frequency = <50000000>;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	clock-frequency = <150000000>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-	vmmc-supply = <&vcc3v0_sd>;
-	vqmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy0_dp {
-	port {
-		tcphy0_typec_dp: endpoint {
-			remote-endpoint = <&typec_dp>;
-		};
-	};
-};
-
-&tcphy0_usb3 {
-	port {
-		tcphy0_typec_ss: endpoint {
-			remote-endpoint = <&typec_ss>;
-		};
-	};
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>;
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		phy-supply = <&vbus_typec>;
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-
-	port {
-		u2phy0_typec_hs: endpoint {
-			remote-endpoint = <&typec_hs>;
-		};
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts
deleted file mode 100644
index 054c6a4d1a45..000000000000
--- a/arch/arm/dts/rk3399-pinebook-pro.dts
+++ /dev/null
@@ -1,1111 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/usb/pd.h>
-#include <dt-bindings/leds/common.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Pine64 Pinebook Pro";
-	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
-	chassis-type = "laptop";
-
-	aliases {
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	backlight: edp-backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&vcc_12v>;
-		pwms = <&pwm0 0 740740 0>;
-	};
-
-	bat: battery {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <9800000>;
-		voltage-max-design-microvolt = <4350000>;
-		voltage-min-design-microvolt = <3000000>;
-	};
-
-	edp_panel: edp-panel {
-		compatible = "boe,nv140fhmn49";
-		backlight = <&backlight>;
-		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_pin>;
-		power-supply = <&vcc3v3_panel>;
-
-		port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&edp_out_panel>;
-			};
-		};
-	};
-
-	/*
-	 * Use separate nodes for gpio-keys to allow for selective deactivation
-	 * of wakeup sources via sysfs without disabling the whole key
-	 */
-	gpio-key-lid {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lidbtn_pin>;
-
-		switch-lid {
-			debounce-interval = <20>;
-			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "Lid";
-			linux,code = <SW_LID>;
-			linux,input-type = <EV_SW>;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-			wakeup-source;
-		};
-	};
-
-	gpio-key-power {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn_pin>;
-
-		key-power {
-			debounce-interval = <20>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
-
-		green_led: led-0 {
-			color = <LED_COLOR_ID_GREEN>;
-			default-state = "on";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-			label = "green:power";
-		};
-
-		red_led: led-1 {
-			color = <LED_COLOR_ID_RED>;
-			default-state = "off";
-			function = LED_FUNCTION_STANDBY;
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-			label = "red:standby";
-			panic-indicator;
-			retain-state-suspended;
-		};
-	};
-
-	/* Power sequence for SDIO WiFi module */
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h_pin>;
-		post-power-on-delay-ms = <100>;
-		power-off-delay-us = <500000>;
-
-		/* WL_REG_ON on module */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	/* Audio components */
-	es8316-sound {
-		compatible = "simple-audio-card";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_det_pin>;
-		simple-audio-card,name = "rockchip,es8316-codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphones",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"MIC1", "Mic Jack",
-			"Headphones", "HPOL",
-			"Headphones", "HPOR",
-			"Speaker Amplifier INL", "HPOL",
-			"Speaker Amplifier INR", "HPOR",
-			"Speaker", "Speaker Amplifier OUTL",
-			"Speaker", "Speaker Amplifier OUTR";
-
-		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
-		simple-audio-card,aux-devs = <&speaker_amp>;
-		simple-audio-card,pin-switches = "Speaker";
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&es8316>;
-		};
-	};
-
-	speaker_amp: speaker-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-		sound-name-prefix = "Speaker Amplifier";
-		VCC-supply = <&pa_5v>;
-	};
-
-	/* Power tree */
-	/* Root power source */
-	vcc_sysin: vcc-sysin {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sysin";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* Regulators supplied by vcc_sysin */
-	/* LCD backlight supply */
-	vcc_12v: vcc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&vcc_sysin>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	/* Main 3.3 V supply */
-	vcc3v3_sys: wifi_bat: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sysin>;
-
-		regulator-state-mem {
-			regulator-on-in-suspend;
-		};
-	};
-
-	/* 5 V USB power supply */
-	vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_5v_pin>;
-		regulator-name = "vcc5v0_usb";
-		regulator-always-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_sysin>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	/* RK3399 logic supply */
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc_sysin>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-
-		regulator-state-mem {
-			regulator-on-in-suspend;
-		};
-	};
-
-	/* Regulators supplied by vcc3v3_sys */
-	/* 0.9 V supply, always on */
-	vcc_0v9: vcc-0v9 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_0v9";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	/* S3 1.8 V supply, switched by vcc1v8_s3 */
-	vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcca1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	/* micro SD card power */
-	vcc3v0_sd: vcc3v0-sd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h_pin>;
-		regulator-name = "vcc3v0_sd";
-		regulator-always-on;
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	/* LCD panel power, called VCC3V3_S0 in schematic */
-	vcc3v3_panel: vcc3v3-panel {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcdvcc_en_pin>;
-		regulator-name = "vcc3v3_panel";
-		regulator-always-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-enable-ramp-delay = <100000>;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	/* M.2 adapter power, switched by vcc1v8_s3 */
-	vcc3v3_ssd: vcc3v3-ssd {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_ssd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	/* Regulators supplied by vcc5v0_usb */
-	/* USB 3 port power supply regulator  */
-	vcc5v0_otg: vcc5v0-otg {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en_pin>;
-		regulator-name = "vcc5v0_otg";
-		regulator-always-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	/* Regulators supplied by vcc5v0_usb */
-	/* Type C port power supply regulator */
-	vbus_5vout: vbus_typec: vbus-5vout {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec0_en_pin>;
-		regulator-name = "vbus_5vout";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	/* Regulators supplied by vcc_1v8 */
-	/* Primary 0.9 V LDO */
-	vcca0v9_s3: vcca0v9-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc0v9_s3";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_1v8>;
-
-		regulator-state-mem {
-			regulator-on-in-suspend;
-		};
-	};
-
-	mains_charger: dc-charger {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
-
-		/* Also triggered by USB charger */
-		pinctrl-names = "default";
-		pinctrl-0 = <&dc_det_pin>;
-	};
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&edp {
-	force-hpd;
-	pinctrl-names = "default";
-	pinctrl-0 = <&edp_hpd>;
-	status = "okay";
-
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
-	};
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <4>;
-	i2c-scl-rising-time-ns = <168>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		interrupt-parent = <&gpio3>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l_pin>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc_sysin>;
-		vcc2-supply = <&vcc_sysin>;
-		vcc3-supply = <&vcc_sysin>;
-		vcc4-supply = <&vcc_sysin>;
-		vcc6-supply = <&vcc_sysin>;
-		vcc7-supply = <&vcc_sysin>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc_sysin>;
-		vcc10-supply = <&vcc_sysin>;
-		vcc11-supply = <&vcc_sysin>;
-		vcc12-supply = <&vcc3v3_sys>;
-
-		regulators {
-			/* rk3399 center logic supply */
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: vcc_wl: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			/* not used */
-			LDO_REG1 {
-			};
-
-			/* not used */
-			LDO_REG2 {
-			};
-
-			vcc1v8_pmupll: LDO_REG3 {
-				regulator-name = "vcc1v8_pmupll";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_pin>;
-		regulator-name = "vdd_cpu_b";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		vin-supply = <&vcc_1v8>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_pin>;
-		regulator-name = "vdd_gpu";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		vin-supply = <&vcc_1v8>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	i2c-scl-falling-time-ns = <4>;
-	i2c-scl-rising-time-ns = <168>;
-	status = "okay";
-
-	es8316: audio-codec@11 {
-		compatible = "everest,es8316";
-		reg = <0x11>;
-		clocks = <&cru SCLK_I2S_8CH_OUT>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
-&i2c3 {
-	i2c-scl-falling-time-ns = <15>;
-	i2c-scl-rising-time-ns = <450>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-falling-time-ns = <20>;
-	i2c-scl-rising-time-ns = <600>;
-	status = "okay";
-
-	fusb0: fusb30x@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int_pin>;
-		vbus-supply = <&vbus_typec>;
-
-		connector {
-			compatible = "usb-c-connector";
-			data-role = "dual";
-			label = "USB-C";
-			op-sink-microwatt = <1000000>;
-			power-role = "dual";
-			sink-pdos =
-				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
-			source-pdos =
-				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
-			try-power-role = "sink";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					usbc_hs: endpoint {
-						remote-endpoint =
-							<&u2phy0_typec_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					usbc_ss: endpoint {
-						remote-endpoint =
-							<&tcphy0_typec_ss>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					usbc_dp: endpoint {
-						remote-endpoint =
-							<&tcphy0_typec_dp>;
-					};
-				};
-			};
-		};
-	};
-
-	cw2015@62 {
-		compatible = "cellwise,cw2015";
-		reg = <0x62>;
-		cellwise,battery-profile = /bits/ 8 <
-			0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
-			0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
-			0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
-			0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
-			0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
-			0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
-			0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
-			0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
-		>;
-		cellwise,monitor-interval-ms = <5000>;
-		monitored-battery = <&bat>;
-		power-supplies = <&mains_charger>, <&fusb0>;
-	};
-};
-
-&i2s1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
-	rockchip,capture-channels = <8>;
-	rockchip,playback-channels = <8>;
-	status = "okay";
-};
-
-&io_domains {
-	audio-supply = <&vcc_3v0>;
-	gpio1830-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	bus-scan-delay-ms = <1000>;
-	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>;
-	vpcie0v9-supply = <&vcca0v9_s3>;
-	vpcie1v8-supply = <&vcca1v8_s3>;
-	vpcie3v3-supply = <&vcc3v3_ssd>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn_pin: pwrbtn-pin {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		lidbtn_pin: lidbtn-pin {
-			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	dc-charger {
-		dc_det_pin: dc-det-pin {
-			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	es8316 {
-		hp_det_pin: hp-det-pin {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	fusb302x {
-		fusb0_int_pin: fusb0-int-pin {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	i2s1 {
-		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
-			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
-		};
-	};
-
-	lcd-panel {
-		lcdvcc_en_pin: lcdvcc-en-pin {
-			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		panel_en_pin: panel-en-pin {
-			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		lcd_panel_reset_pin: lcd-panel-reset-pin {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		pwr_led_pin: pwr-led-pin {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		slp_led_pin: slp-led-pin {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l_pin: pmic-int-l-pin {
-			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdcard {
-		sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
-			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h_pin: wifi-enable-h-pin {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		pwr_5v_pin: pwr-5v-pin {
-			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc5v0_host_en_pin: vcc5v0-host-en-pin {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wireless-bluetooth {
-		bt_wake_pin: bt-wake-pin {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_pin: bt-host-wake-pin {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_reset_pin: bt-reset-pin {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	sd-uhs-sdr50;
-	vmmc-supply = <&vcc3v0_sd>;
-	vqmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&spi1 {
-	max-freq = <10000000>;
-	status = "okay";
-
-	spiflash: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		m25p,fast-read;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy0_dp {
-	port {
-		tcphy0_typec_dp: endpoint {
-			remote-endpoint = <&usbc_dp>;
-		};
-	};
-};
-
-&tcphy0_usb3 {
-	port {
-		tcphy0_typec_ss: endpoint {
-			remote-endpoint = <&usbc_ss>;
-		};
-	};
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_otg>;
-		status = "okay";
-	};
-
-	port {
-		u2phy0_typec_hs: endpoint {
-			remote-endpoint = <&usbc_hs>;
-		};
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_otg>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4345c5";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		max-speed = <1500000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		vbat-supply = <&wifi_bat>;
-		vddio-supply = <&vcc_wl>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
deleted file mode 100644
index 61f3fec5a8b1..000000000000
--- a/arch/arm/dts/rk3399-pinephone-pro.dts
+++ /dev/null
@@ -1,621 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl>
- * Copyright (c) 2021 Kamil Trzciński <ayufan@ayufan.eu>
- */
-
-/*
- * PinePhone Pro datasheet:
- * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
- */
-
-/dts-v1/;
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Pine64 PinePhonePro";
-	compatible = "pine64,pinephone-pro", "rockchip,rk3399";
-	chassis-type = "handset";
-
-	aliases {
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1600000>;
-		poll-interval = <100>;
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <100000>;
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <600000>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 50000 0>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn_pin>;
-
-		key-power {
-			debounce-interval = <20>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	vcc_sys: vcc-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc3v3_sys: vcc3v3-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcca1v8_s3: vcc1v8-s3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcca1v8_s3";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc3v3_sys>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc1v8_codec: vcc1v8-codec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc1v8_codec_en>;
-		regulator-name = "vcc1v8_codec";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	wifi_pwrseq: sdio-wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk818 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h_pin>;
-		/*
-		 * Wait between power-on and SDIO access for CYP43455
-		 * POR circuit.
-		 */
-		post-power-on-delay-ms = <110>;
-		/*
-		 * Wait between consecutive toggles for CYP43455 CBUCK
-		 * regulator discharge.
-		 */
-		power-off-delay-us = <10000>;
-
-		/* WL_REG_ON on module */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	/* MIPI DSI panel 1.8v supply */
-	vcc1v8_lcd: vcc1v8-lcd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		regulator-name = "vcc1v8_lcd";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc3v3_sys>;
-		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-	};
-
-	/* MIPI DSI panel 2.8v supply */
-	vcc2v8_lcd: vcc2v8-lcd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		regulator-name = "vcc2v8_lcd";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		vin-supply = <&vcc3v3_sys>;
-		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-	};
-};
-
-&cpu_alert0 {
-	temperature = <65000>;
-};
-&cpu_alert1 {
-	temperature = <68000>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk818: pmic@1c {
-		compatible = "rockchip,rk818";
-		reg = <0x1c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc_sys>;
-		vcc2-supply = <&vcc_sys>;
-		vcc3-supply = <&vcc_sys>;
-		vcc4-supply = <&vcc_sys>;
-		vcc6-supply = <&vcc_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-
-		regulators {
-			vdd_cpu_l: DCDC_REG1 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <875000>;
-				regulator-max-microvolt = <975000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_center: DCDC_REG2 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG1 {
-				regulator-name = "vcca3v0_codec";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcc3v0_touch: LDO_REG2 {
-				regulator-name = "vcc3v0_touch";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcca1v8_codec: LDO_REG3 {
-				regulator-name = "vcca1v8_codec";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			rk818_pwr_on: LDO_REG4 {
-				regulator-name = "rk818_pwr_on";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG5 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG7 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vcc3v3_s3: LDO_REG8 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd: LDO_REG9 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vcc3v3_s0: SWITCH_REG {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_pin>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <875000>;
-		regulator-max-microvolt = <1150000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_pin>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <875000>;
-		regulator-max-microvolt = <975000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-
-	touchscreen@14 {
-		compatible = "goodix,gt1158";
-		reg = <0x14>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
-		irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
-		AVDD28-supply = <&vcc3v0_touch>;
-		VDDIO-supply = <&vcc3v0_touch>;
-		touchscreen-size-x = <720>;
-		touchscreen-size-y = <1440>;
-	};
-};
-
-&cluster0_opp {
-	opp04 {
-		status = "disabled";
-	};
-
-	opp05 {
-		status = "disabled";
-	};
-};
-
-&cluster1_opp {
-	opp06 {
-		opp-hz = /bits/ 64 <1500000000>;
-		opp-microvolt = <1100000 1100000 1150000>;
-	};
-
-	opp07 {
-		status = "disabled";
-	};
-};
-
-&io_domains {
-	bt656-supply = <&vcc1v8_dvp>;
-	audio-supply = <&vcca1v8_codec>;
-	sdmmc-supply = <&vccio_sd>;
-	gpio1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&mipi_dsi {
-	status = "okay";
-	clock-master;
-
-	ports {
-		mipi_out: port@1 {
-			#address-cells = <0>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "hannstar,hsd060bhw4";
-		reg = <0>;
-		backlight = <&backlight>;
-		reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vcc2v8_lcd>;
-		iovcc-supply = <&vcc1v8_lcd>;
-		pinctrl-names = "default";
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn_pin: pwrbtn-pin {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h_pin: wifi-enable-h-pin {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sound {
-		vcc1v8_codec_en: vcc1v8-codec-en {
-			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	wireless-bluetooth {
-		bt_wake_pin: bt-wake-pin {
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_pin: bt-host-wake-pin {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_reset_pin: bt-reset-pin {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	disable-wp;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-	vmmc-supply = <&vcc3v3_sys>;
-	vqmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>;
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4345c5";
-		clocks = <&rk818 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		max-speed = <1500000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-	assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
-			  <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
-	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
-	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>;
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-	assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>,
-			  <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
-	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
-	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>;
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts
deleted file mode 100644
index 18a98c4648ea..000000000000
--- a/arch/arm/dts/rk3399-puma-haikou.dts
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-#include "rk3399-puma.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Theobroma Systems RK3399-Q7 SoM";
-	compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
-
-	aliases {
-		mmc1 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&haikou_keys_pin>;
-		pinctrl-names = "default";
-
-		button-batlow-n {
-			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-			label = "BATLOW#";
-			linux,code = <KEY_BATTERY>;
-		};
-
-		button-slp-btn-n {
-			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
-			label = "SLP_BTN#";
-			linux,code = <KEY_SLEEP>;
-		};
-
-		button-wake-n {
-			gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
-			label = "WAKE#";
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-
-		switch-lid-btn-n {
-			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-			label = "LID_BTN#";
-			linux,code = <SW_LID>;
-			linux,input-type = <EV_SW>;
-		};
-	};
-
-	leds {
-		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
-
-		sd_card_led: led-1 {
-			label = "sd_card_led";
-			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	i2s0-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,name = "Haikou,I2S-codec";
-		simple-audio-card,mclk-fs = <512>;
-
-		simple-audio-card,codec {
-			clocks = <&sgtl5000_clk>;
-			sound-dai = <&sgtl5000>;
-		};
-
-		simple-audio-card,cpu {
-			bitclock-master;
-			frame-master;
-			sound-dai = <&i2s0>;
-		};
-	};
-
-	sgtl5000_clk: sgtl5000-oscillator  {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24576000>;
-	};
-
-	dc_12v: dc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc3v3_baseboard: vcc3v3-baseboard {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_baseboard";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc5v0_baseboard: vcc5v0-baseboard {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_baseboard";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc5v0_otg: vcc5v0-otg-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&otg_vbus_drv>;
-		regulator-name = "vcc5v0_otg";
-		regulator-always-on;
-	};
-
-	vdda_codec: vdda-codec {
-		compatible = "regulator-fixed";
-		regulator-name = "vdda_codec";
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc5v0_baseboard>;
-	};
-
-	vddd_codec: vddd-codec {
-		compatible = "regulator-fixed";
-		regulator-name = "vddd_codec";
-		regulator-boot-on;
-		regulator-min-microvolt = <1600000>;
-		regulator-max-microvolt = <1600000>;
-		vin-supply = <&vcc5v0_baseboard>;
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&sgtl5000_clk>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&vdda_codec>;
-		VDDIO-supply = <&vdda_codec>;
-		VDDD-supply = <&vddd_codec>;
-		status = "okay";
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		haikou_keys_pin: haikou-keys-pin {
-			rockchip,pins =
-			  /* LID_BTN */
-			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* BATLOW# */
-			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* SLP_BTN# */
-			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* WAKE# */
-			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		sd_card_led_pin: sd-card-led-pin {
-			rockchip,pins =
-			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb2 {
-		otg_vbus_drv: otg-vbus-drv {
-			rockchip,pins =
-			  <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <40000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-	vmmc-supply = <&vcc3v3_baseboard>;
-	status = "okay";
-};
-
-&spi5 {
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "otg";
-	extcon = <&extcon_usb3>;
-	status = "okay";
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_otg>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
deleted file mode 100644
index c08e69391c01..000000000000
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdhci;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&module_led_pin>;
-
-		module_led: led-0 {
-			label = "module_led";
-			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			panic-indicator;
-		};
-	};
-
-	extcon_usb3: extcon-usb3 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_id>;
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	vcc1v2_phy: vcc1v2-phy {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v2_phy";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc5v0_sys>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&emmc_phy {
-	status = "okay";
-	drive-impedance-ohm = <33>;
-};
-
-&gpio0 {
-	/*
-	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
-	 * signal. This usually represents the state of a switch on the baseboard.
-	 * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
-	 */
-	bios-disable-hog {
-		gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		input;
-		line-name = "bios_disable";
-	};
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc1v2_phy>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x10>;
-	rx_delay = <0x10>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	clock-frequency = <400000>;
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc5v0_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc1v8_pmu>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_ldo1: LDO_REG1 {
-				regulator-name = "vcc_ldo1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_hdmi: LDO_REG2 {
-				regulator-name = "vcc1v8_hdmi";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sd: LDO_REG4 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc_ldo5: LDO_REG5 {
-				regulator-name = "vcc_ldo5";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ldo6: LDO_REG6 {
-				regulator-name = "vcc_ldo6";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc0v9_hdmi: LDO_REG7 {
-				regulator-name = "vcc0v9_hdmi";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_efuse: LDO_REG8 {
-				regulator-name = "vcc_efuse";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s3: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_gpu: regulator@60 {
-		compatible = "fcs,fan53555";
-		reg = <0x60>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <600000>;
-		regulator-max-microvolt = <1230000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	fan: fan@18 {
-		compatible = "ti,amc6821";
-		reg = <0x18>;
-		#cooling-cells = <2>;
-	};
-
-	rtc_twi: rtc@6f {
-		compatible = "isil,isl1208";
-		reg = <0x6f>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	vdd_cpu_b: regulator@60 {
-		compatible = "fcs,fan53555";
-		reg = <0x60>;
-		vin-supply = <&vcc5v0_sys>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <600000>;
-		regulator-max-microvolt = <1230000>;
-		regulator-ramp-delay = <1000>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&i2s0 {
-	pinctrl-0 = <&i2s0_2ch_bus>;
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-/*
- * As Q7 does not specify neither a global nor a RX clock for I2S these
- * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
- */
-&i2s0_2ch_bus {
-	rockchip,pins =
-		<3 RK_PD0 1 &pcfg_pull_none>,
-		<3 RK_PD2 1 &pcfg_pull_none>,
-		<3 RK_PD3 1 &pcfg_pull_none>,
-		<3 RK_PD7 1 &pcfg_pull_none>;
-};
-
-&io_domains {
-	status = "okay";
-	bt656-supply = <&vcc_1v8>;
-	audio-supply = <&vcc_1v8>;
-	sdmmc-supply = <&vcc_sd>;
-	gpio1830-supply = <&vcc_1v8>;
-};
-
-&pmu_io_domains {
-	status = "okay";
-	pmu1830-supply = <&vcc_1v8>;
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pinctrl {
-	i2c8 {
-		i2c8_xfer_a: i2c8-xfer {
-			rockchip,pins =
-			  <1 RK_PC4 1 &pcfg_pull_up>,
-			  <1 RK_PC5 1 &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		module_led_pin: module-led-pin {
-			rockchip,pins =
-			  <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-			  <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins =
-			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb3 {
-		usb3_id: usb3-id {
-			rockchip,pins =
-			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&sdhci {
-	/*
-	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
-	 * enough.
-	 */
-	max-frequency = <100000000>;
-
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&sdmmc {
-	vqmmc-supply = <&vcc_sd>;
-};
-
-&spi1 {
-	status = "okay";
-
-	norflash: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>;
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
deleted file mode 100644
index 9447c8724b65..000000000000
--- a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
- * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
- */
-
-/dts-v1/;
-#include "rk3399-roc-pc.dtsi"
-
-/ {
-	model = "Firefly ROC-RK3399-PC Mezzanine Board";
-	compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
-
-	aliases {
-		mmc2 = &sdio0;
-	};
-
-	/* MP8009 PoE PD */
-	poe_12v: poe-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "poe_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc3v3_ngff: vcc3v3-ngff {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_ngff";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc3v3_ngff_en>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&sys_12v>;
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_pcie";
-		enable-active-high;
-		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc3v3_pcie_en>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&sys_12v>;
-	};
-};
-
-&sys_12v {
-	vin-supply = <&poe_12v>;
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_perst>;
-	vpcie3v3-supply = <&vcc3v3_pcie>;
-	vpcie1v8-supply = <&vcc1v8_pmu>;
-	vpcie0v9-supply = <&vcca_0v9>;
-	status = "okay";
-};
-
-&pinctrl {
-	ngff {
-		vcc3v3_ngff_en: vcc3v3-ngff-en {
-			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie {
-		vcc3v3_pcie_en: vcc3v3-pcie-en {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie_perst: pcie-perst {
-			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc3v3_ngff>;
-	vqmmc-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-roc-pc.dts b/arch/arm/dts/rk3399-roc-pc.dts
deleted file mode 100644
index cd4195425309..000000000000
--- a/arch/arm/dts/rk3399-roc-pc.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
- */
-
-/dts-v1/;
-#include "rk3399-roc-pc.dtsi"
-
-/ {
-	model = "Firefly ROC-RK3399-PC Board";
-	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-};
diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi
deleted file mode 100644
index ca7a446b6568..000000000000
--- a/arch/arm/dts/rk3399-roc-pc.dtsi
+++ /dev/null
@@ -1,844 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Firefly ROC-RK3399-PC Board";
-	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdmmc;
-		mmc1 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 25000 0>;
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1500000>;
-		poll-interval = <100>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <18000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_key_l>;
-
-		key-power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_int>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
-
-		work_led: led-0 {
-			label = "green:work";
-			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		diy_led: led-1 {
-			label = "red:diy";
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc2";
-		};
-
-		yellow_led: led-2 {
-			label = "yellow:yellow-led";
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_vbus_typec0: vcc-vbus-typec0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_vbus_typec0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sys_12v: sys-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "sys_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&dc_12v>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v0_sd: vcc3v0-sd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc3v0_sd_en>;
-		regulator-name = "vcc3v0_sd";
-		regulator-boot-on;
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&sys_12v>;
-	};
-
-	vcca_0v9: vcca-0v9 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcca_0v9";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
-		regulator-name = "vcc5v0_host";
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_vbus_typec1: vcc-vbus-typec1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc_vbus_typec1_en>;
-		regulator-name = "vcc_vbus_typec1";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_sys: vcc-sys {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc_sys_en>;
-		regulator-name = "vcc_sys";
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&sys_12v>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <450000>;
-		regulator-max-microvolt = <1400000>;
-		pwm-supply = <&vcc3v3_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	avdd-0v9-supply = <&vcca0v9_hdmi>;
-	avdd-1v8-supply = <&vcca1v8_hdmi>;
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		vcc10-supply = <&vcc3v3_sys>;
-		vcc11-supply = <&vcc3v3_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_3v0>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG1 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca1v8_hdmi: LDO_REG2 {
-				regulator-name = "vcca1v8_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca0v9_hdmi: LDO_REG7 {
-				regulator-name = "vcca0v9_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_pin>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_pin>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb1: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb1_int>;
-		vbus-supply = <&vcc_vbus_typec1>;
-		status = "okay";
-	};
-};
-
-&i2c7 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc_vbus_typec0>;
-		status = "okay";
-	};
-
-	mp8859: regulator@66 {
-		compatible = "mps,mp8859";
-		reg = <0x66>;
-		dc_12v: mp8859_dcdc {
-			regulator-name = "dc_12v";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vcc_vbus_typec0>;
-
-			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-suspend-microvolt = <12000000>;
-			};
-		};
-	};
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	audio-supply = <&vcca1v8_codec>;
-	bt656-supply = <&vcc_3v0>;
-	gpio1830-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwr_key_l: pwr-key-l {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	ir {
-		ir_int: ir-int {
-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	lcd-panel {
-		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		diy_led_pin: diy-led-pin {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		work_led_pin: work-led-pin {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		yellow_led_pin: yellow-led-pin {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdmmc {
-		vcc3v0_sd_en: vcc3v0-sd-en {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc_sys_en: vcc-sys-en {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		hub_rst: hub-rst {
-			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	usb-typec {
-		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
-			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	fusb30x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		fusb1_int: fusb1-int {
-			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc3v0_sd>;
-	vqmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		phy-supply = <&vcc_vbus_typec0>;
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		phy-supply = <&vcc_vbus_typec1>;
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-rock-4c-plus.dts b/arch/arm/dts/rk3399-rock-4c-plus.dts
deleted file mode 100644
index 7baf9d1b22fd..000000000000
--- a/arch/arm/dts/rk3399-rock-4c-plus.dts
+++ /dev/null
@@ -1,709 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2022 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include "rk3399.dtsi"
-#include "rk3399-t-opp.dtsi"
-
-/ {
-	model = "Radxa ROCK 4C+";
-	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_led1 &user_led2>;
-
-		/* USER_LED1 */
-		led-0 {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		/* USER_LED2 */
-		led-1 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk809 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_3v3: vcc-3v3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vcc3v3_phy1: vcc3v3-phy1-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_phy1";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3>;
-	};
-
-	vcc5v0_host1: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host1";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_host0_s0>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc5v0_typec: vcc5v0-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec0_en>;
-		regulator-name = "vcc5v0_typec";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vdd_log: vdd-log-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <950000>;
-		regulator-max-microvolt = <950000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc3v3_phy1>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x2a>;
-	rx_delay = <0x21>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	avdd-0v9-supply = <&vcc_0v9_s0>;
-	avdd-1v8-supply = <&vcc_1v8_s0>;
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	i2c-scl-falling-time-ns = <30>;
-	i2c-scl-rising-time-ns = <180>;
-	clock-frequency = <400000>;
-
-	rk809: pmic@20 {
-		compatible = "rockchip,rk809";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "rk808-clkout1", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc_buck5_s3>;
-		vcc6-supply = <&vcc_buck5_s3>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-initial-mode = <0x2>;
-				regulator-name = "vdd_center";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-initial-mode = <0x2>;
-				regulator-name = "vdd_cpu_l";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-				regulator-initial-mode = <0x2>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc3v3_sys: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-initial-mode = <0x2>;
-				regulator-name = "vcc3v3_sys";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_buck5_s3: DCDC_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_buck5_s3";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_0v9_s3: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-name = "vcc_0v9_s3";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s3";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_0v9_s0: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-name = "vcc_0v9_s0";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vcc_1v8_s0: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s0";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_mipi: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "vcc_mipi";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5_s0: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-name = "vcc_1v5_s0";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0_s0: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "vcc_3v0_s0";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_sdio_s0: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_sdio_s0";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_cam";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc5v0_host0_s0: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc5v0_host0_s0";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			lcd_3v3: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "lcd_3v3";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-compatible = "fan53555-reg";
-		pinctrl-0 = <&vsel1_gpio>;
-		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-compatible = "fan53555-reg";
-		pinctrl-0 = <&vsel2_gpio>;
-		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-		regulator-initial-mode = <1>; /* 1:force PWM 2:auto */
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	audio-supply = <&vcc_1v8_s0>;
-	bt656-supply = <&vcc_3v0_s0>;
-	gpio1830-supply = <&vcc_3v0_s0>;
-	sdmmc-supply = <&vcc_sdio_s0>;
-	status = "okay";
-};
-
-&pinctrl {
-	bt {
-		bt_enable_h: bt-enable-h {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	leds {
-		user_led1: user-led1 {
-			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led2: user-led2 {
-			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_gpio: vsel2-gpio {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdmmc {
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>,
-					<4 9 1 &pcfg_pull_up_8ma>,
-					<4 10 1 &pcfg_pull_up_8ma>,
-					<4 11 1 &pcfg_pull_up_8ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec0_en: vcc5v0-typec-en {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	wifi {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0_s0>;
-	status = "okay";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vcc_1v8_s3>;
-};
-
-&sdhci {
-	max-frequency = <150000000>;
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&sdio0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	bus-width = <4>;
-	clock-frequency = <50000000>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	card-detect-delay = <800>;
-	disable-wp;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	vqmmc-supply = <&vcc_sdio_s0>;
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>;
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host1>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host1>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4345c5";
-		clocks = <&rk809 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		max-speed = <1500000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8_s3>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	extcon = <&u2phy0>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-rock-4se.dts b/arch/arm/dts/rk3399-rock-4se.dts
deleted file mode 100644
index 7cfc198bbae7..000000000000
--- a/arch/arm/dts/rk3399-rock-4se.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
- */
-
-/dts-v1/;
-#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-t-opp.dtsi"
-
-/ {
-	model = "Radxa ROCK 4SE";
-	compatible = "radxa,rock-4se", "rockchip,rk3399";
-
-	aliases {
-		mmc2 = &sdio0;
-	};
-};
-
-&pinctrl {
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&sdio0 {
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4345c5";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		max-speed = <1500000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&vcc5v0_host {
-	enable-active-high;
-	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&vcc5v0_host_en>;
-};
diff --git a/arch/arm/dts/rk3399-rock-pi-4.dtsi b/arch/arm/dts/rk3399-rock-pi-4.dtsi
deleted file mode 100644
index 281a12180703..000000000000
--- a/arch/arm/dts/rk3399-rock-pi-4.dtsi
+++ /dev/null
@@ -1,792 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-
-/ {
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_led2>;
-
-		/* USER_LED2 */
-		led-0 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	sound: sound {
-		compatible = "audio-graph-card";
-		label = "Analog";
-		dais = <&i2s0_p0>;
-	};
-
-	sound-dit {
-		compatible = "audio-graph-card";
-		label = "SPDIF";
-		dais = <&spdif_p0>;
-	};
-
-	spdif-dit {
-		compatible = "linux,spdif-dit";
-		#sound-dai-cells = <0>;
-
-		port {
-			dit_p0_0: endpoint {
-				remote-endpoint = <&spdif_p0_0>;
-			};
-		};
-	};
-
-	vbus_typec: vbus-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec_en>;
-		regulator-name = "vbus_typec";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc12v_dcin: dc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc3v3_lan: vcc3v3-lan-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_lan";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pwr_en>;
-		regulator-name = "vcc3v3_pcie";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: vcc-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc_0v9: vcc-0v9 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_0v9";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc5v0_sys>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc3v3_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	avdd-0v9-supply = <&vcca0v9_hdmi>;
-	avdd-1v8-supply = <&vcca1v8_hdmi>;
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc5v0_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG1 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca1v8_hdmi: LDO_REG2 {
-				regulator-name = "vcca1v8_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca_1v8: LDO_REG3 {
-				regulator-name = "vcca_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca0v9_hdmi: LDO_REG7 {
-				regulator-name = "vcca0v9_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc_cam: SWITCH_REG1 {
-				regulator-name = "vcc_cam";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_mipi: SWITCH_REG2 {
-				regulator-name = "vcc_mipi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_pin>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_pin>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-
-	es8316: codec@11 {
-		compatible = "everest,es8316";
-		reg = <0x11>;
-		clocks = <&cru SCLK_I2S_8CH_OUT>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-
-		port {
-			es8316_p0_0: endpoint {
-				remote-endpoint = <&i2s0_p0_0>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-};
-
-&i2s0 {
-	pinctrl-0 = <&i2s0_2ch_bus>;
-	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
-	rockchip,capture-channels = <2>;
-	rockchip,playback-channels = <2>;
-	status = "okay";
-
-	i2s0_p0: port {
-		i2s0_p0_0: endpoint {
-			dai-format = "i2s";
-			mclk-fs = <256>;
-			remote-endpoint = <&es8316_p0_0>;
-		};
-	};
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	audio-supply = <&vcca1v8_codec>;
-	bt656-supply = <&vcc_3v0>;
-	gpio1830-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-0 = <&pcie_clkreqnb_cpm>;
-	pinctrl-names = "default";
-	vpcie0v9-supply = <&vcc_0v9>;
-	vpcie1v8-supply = <&vcc_1v8>;
-	vpcie3v3-supply = <&vcc3v3_pcie>;
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pinctrl {
-	bt {
-		bt_enable_h: bt-enable-h {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	es8316 {
-		hp_detect: hp-detect {
-			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		hp_int: hp-int {
-			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		user_led2: user-led2 {
-			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie {
-		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio0 {
-		sdio0_bus4: sdio0-bus4 {
-			rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
-					<2 RK_PC5 1 &pcfg_pull_up_20ma>,
-					<2 RK_PC6 1 &pcfg_pull_up_20ma>,
-					<2 RK_PC7 1 &pcfg_pull_up_20ma>;
-		};
-
-		sdio0_cmd: sdio0-cmd {
-			rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
-		};
-
-		sdio0_clk: sdio0-clk {
-			rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec_en: vcc5v0-typec-en {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wifi {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	status = "okay";
-
-	vref-supply = <&vcc_1v8>;
-};
-
-&sdhci {
-	max-frequency = <150000000>;
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&sdio0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	bus-width = <4>;
-	clock-frequency = <50000000>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&spdif {
-
-	spdif_p0: port {
-		spdif_p0_0: endpoint {
-			remote-endpoint = <&dit_p0_0>;
-		};
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	status = "okay";
-
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts
deleted file mode 100644
index d5df8939a658..000000000000
--- a/arch/arm/dts/rk3399-rock-pi-4a.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
- */
-
-/dts-v1/;
-#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Radxa ROCK Pi 4A";
-	compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
-};
-
-&spi1 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
-};
diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts
deleted file mode 100644
index de2ebe4cb4f3..000000000000
--- a/arch/arm/dts/rk3399-rock-pi-4c.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	model = "Radxa ROCK Pi 4C";
-	compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
-
-	aliases {
-		mmc2 = &sdio0;
-	};
-};
-
-&es8316 {
-	pinctrl-0 = <&hp_detect &hp_int>;
-	pinctrl-names = "default";
-	interrupt-parent = <&gpio1>;
-	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdio0 {
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sound {
-	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-};
-
-&spi1 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4345c5";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		max-speed = <1500000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&vcc5v0_host {
-	gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
-};
-
-&vcc5v0_host_en {
-	rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-};
diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts
deleted file mode 100644
index 1a23e8f3cdf6..000000000000
--- a/arch/arm/dts/rk3399-rock960.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "rk3399-rock960.dtsi"
-
-/ {
-	model = "96boards Rock960";
-	compatible = "vamrs,rock960", "rockchip,rk3399";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
-			    <&user_led3_pin>, <&user_led4_pin>,
-			    <&wlan_led_pin>, <&bt_led_pin>;
-
-		user_led1: led-1 {
-			label = "green:user1";
-			gpios = <&gpio4 RK_PC2 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user_led2: led-2 {
-			label = "green:user2";
-			gpios = <&gpio4 RK_PC6 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user_led3: led-3 {
-			label = "green:user3";
-			gpios = <&gpio4 RK_PD0 0>;
-			linux,default-trigger = "mmc1";
-		};
-
-		user_led4: led-4 {
-			label = "green:user4";
-			gpios = <&gpio4 RK_PD4 0>;
-			panic-indicator;
-			linux,default-trigger = "none";
-		};
-
-		wlan_active_led: led-5 {
-			label = "yellow:wlan";
-			gpios = <&gpio4 RK_PD5 0>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		bt_active_led: led-6 {
-			label = "blue:bt";
-			gpios = <&gpio4 RK_PD6 0>;
-			linux,default-trigger = "hci0-power";
-			default-state = "off";
-		};
-	};
-
-};
-
-&cpu_alert0 {
-	temperature = <65000>;
-};
-
-&cpu_thermal {
-	sustainable-power = <1550>;
-
-	cooling-maps {
-		map0 {
-			trip = <&cpu_alert1>;
-		};
-	};
-};
-
-&pcie0 {
-	ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
-};
-
-&pinctrl {
-	leds {
-		user_led1_pin: user-led1-pin {
-			rockchip,pins =
-				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led2_pin: user-led2-pin {
-			rockchip,pins =
-				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led3_pin: user-led3-pin {
-			rockchip,pins =
-				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		user_led4_pin: user-led4-pin {
-			rockchip,pins =
-				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		wlan_led_pin: wlan-led-pin {
-			rockchip,pins =
-				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_led_pin: bt-led-pin {
-			rockchip,pins =
-				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie {
-		pcie_drv: pcie-drv {
-			rockchip,pins =
-				<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-			};
-	};
-
-	usb2 {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins =
-				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&spi0 {
-	/* On Low speed expansion (LS-SPI0) */
-	status = "okay";
-};
-
-&spi4 {
-	/* On High speed expansion (HS-SPI1) */
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "otg";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
-
-&vcc3v3_pcie {
-	gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&vcc5v0_host {
-	gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi
deleted file mode 100644
index c920ddf44baf..000000000000
--- a/arch/arm/dts/rk3399-rock960.dtsi
+++ /dev/null
@@ -1,673 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Linaro Ltd.
- */
-
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	aliases {
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc1v8_s0: vcc1v8-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s0";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_drv>;
-		regulator-boot-on;
-		regulator-name = "vcc3v3_pcie";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc5v0_host";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc_0v9: vcc-0v9 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_0v9";
-		regulator-always-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	avdd-0v9-supply = <&vcca0v9_hdmi>;
-	avdd-1v8-supply = <&vcca1v8_hdmi>;
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-		status = "okay";
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc5v0_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcca1v8_hdmi: LDO_REG2 {
-				regulator-name = "vcca1v8_hdmi";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcca_1v8: LDO_REG3 {
-				regulator-name = "vcca_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sd: LDO_REG4 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc3v0_sd: LDO_REG5 {
-				regulator-name = "vcc3v0_sd";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca0v9_hdmi: LDO_REG7 {
-				regulator-name = "vcca0v9_hdmi";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2s2 {
-        status = "okay";
-};
-
-&io_domains {
-	bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
-	audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
-	sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
-	gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>;
-	vpcie0v9-supply = <&vcc_0v9>;
-	vpcie1v8-supply = <&vcca_1v8>;
-	vpcie3v3-supply = <&vcc3v3_pcie>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&pinctrl {
-	bt {
-		bt_enable_h: bt-enable-h {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdmmc {
-		sdmmc_bus1: sdmmc-bus1 {
-			rockchip,pins =
-				<4 RK_PB0 1 &pcfg_pull_up_8ma>;
-		};
-
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins =
-				<4 RK_PB0 1 &pcfg_pull_up_8ma>,
-				<4 RK_PB1 1 &pcfg_pull_up_8ma>,
-				<4 RK_PB2 1 &pcfg_pull_up_8ma>,
-				<4 RK_PB3 1 &pcfg_pull_up_8ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins =
-				<4 RK_PB4 1 &pcfg_pull_none_18ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins =
-				<4 RK_PB5 1 &pcfg_pull_up_8ma>;
-		};
-	};
-
-	sdio0 {
-		sdio0_bus4: sdio0-bus4 {
-			rockchip,pins =
-				<2 RK_PC4 1 &pcfg_pull_up_20ma>,
-				<2 RK_PC5 1 &pcfg_pull_up_20ma>,
-				<2 RK_PC6 1 &pcfg_pull_up_20ma>,
-				<2 RK_PC7 1 &pcfg_pull_up_20ma>;
-		};
-
-		sdio0_cmd: sdio0-cmd {
-			rockchip,pins =
-				<2 RK_PD0 1 &pcfg_pull_up_20ma>;
-		};
-
-		sdio0_clk: sdio0-clk {
-			rockchip,pins =
-				<2 RK_PD1 1 &pcfg_pull_none_20ma>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins =
-				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins =
-				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins =
-				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	wifi {
-		wifi_host_wake_l: wifi-host-wake-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&sdio0 {
-	bus-width = <4>;
-	clock-frequency = <50000000>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	sd-uhs-sdr104;
-	vqmmc-supply = <&vcc_sd>;
-	card-detect-delay = <800>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>;
-	rockchip,hw-tshut-polarity = <1>;
-	rockchip,hw-tshut-temp = <110000>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-};
-
-&u2phy1 {
-	status = "okay";
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_host>;
-	status = "okay";
-};
-
-&u2phy1_host {
-	phy-supply = <&vcc5v0_host>;
-	status = "okay";
-};
-
-&u2phy0_otg {
-	status = "okay";
-};
-
-&u2phy1_otg {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
deleted file mode 100644
index 4b42717800f7..000000000000
--- a/arch/arm/dts/rk3399-rockpro64.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
- */
-
-/dts-v1/;
-#include "rk3399-rockpro64.dtsi"
-
-/ {
-	model = "Pine64 RockPro64 v2.1";
-	compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
-};
-
-&i2c1 {
-	es8316: codec@11 {
-		compatible = "everest,es8316";
-		reg = <0x11>;
-		clocks = <&cru SCLK_I2S_8CH_OUT>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-
-		port {
-			es8316_p0_0: endpoint {
-				remote-endpoint = <&i2s1_p0_0>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi
deleted file mode 100644
index f30b82a10ca3..000000000000
--- a/arch/arm/dts/rk3399-rockpro64.dtsi
+++ /dev/null
@@ -1,956 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
- */
-
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdio0;
-		mmc1 = &sdmmc;
-		mmc2 = &sdhci;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	/* enable for panel backlight support */
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <5>;
-		pwms = <&pwm0 0 1000000 0>;
-		status = "disabled";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		key-power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&ir_int>;
-		pinctrl-names = "default";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
-
-		work_led: led-0 {
-			label = "work";
-			default-state = "on";
-			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		};
-
-		diy_led: led-1 {
-			label = "diy";
-			default-state = "off";
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 100 150 200 255>;
-		#cooling-cells = <2>;
-		fan-supply = <&vcc12v_dcin>;
-		pwms = <&pwm1 0 50000 0>;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "Analog";
-		dais = <&i2s1_p0>;
-	};
-
-	sound-dit {
-		compatible = "audio-graph-card";
-		label = "SPDIF";
-		dais = <&spdif_p0>;
-	};
-
-	spdif-dit {
-		compatible = "linux,spdif-dit";
-		#sound-dai-cells = <0>;
-
-		port {
-			dit_p0_0: endpoint {
-				remote-endpoint = <&spdif_p0_0>;
-			};
-		};
-	};
-
-	avdd: avdd-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "avdd";
-		regulator-min-microvolt = <11000000>;
-		regulator-max-microvolt = <11000000>;
-		vin-supply = <&vcc3v3_s0>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	/* micro SD card power */
-	vcc3v0_sd: vcc3v0-sd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h>;
-		regulator-name = "vcc3v0_sd";
-		regulator-always-on;
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pwr_en>;
-		regulator-name = "vcc3v3_pcie";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_typec: vcc5v0-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec_en>;
-		regulator-name = "vcc5v0_typec";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc5v0_usb: vcc5v0-usb {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		pwm-supply = <&vcc5v0_sys>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1700000>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_thermal {
-	trips {
-		cpu_warm: cpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		cpu_hot: cpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-
-	cooling-maps {
-		map2 {
-			trip = <&cpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map3 {
-			trip = <&cpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc5v0_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcca_1v8>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v0_touch: LDO_REG2 {
-				regulator-name = "vcc3v0_touch";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca_1v8: LDO_REG3 {
-				regulator-name = "vcca_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_pin>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_pin>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc5v0_typec>;
-		status = "okay";
-	};
-
-	/* enable for pine64 touch screen support */
-	touch: touchscreen@5d {
-		compatible = "goodix,gt911";
-		reg = <0x5d>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
-		AVDD28-supply = <&vcc3v0_touch>;
-		VDDIO-supply = <&vcc3v0_touch>;
-		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-
-	i2s1_p0: port {
-		i2s1_p0_0: endpoint {
-			dai-format = "i2s";
-			mclk-fs = <256>;
-			remote-endpoint = <&es8316_p0_0>;
-		};
-	};
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	bt656-supply = <&vcc1v8_dvp>;
-	audio-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	gpio1830-supply = <&vcc_3v0>;
-};
-
-/* enable for pine64 panel display support */
-&mipi_dsi {
-	clock-master;
-	status = "disabled";
-
-	ports {
-		mipi_out: port@1 {
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	mipi_panel: panel@0 {
-		compatible = "feiyang,fy07024di26a30d";
-		reg = <0>;
-		avdd-supply = <&avdd>;
-		backlight = <&backlight>;
-		dvdd-supply = <&vcc3v3_s0>;
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
-&pcie0 {
-	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_perst>;
-	vpcie12v-supply = <&vcc12v_dcin>;
-	vpcie3v3-supply = <&vcc3v3_pcie>;
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pinctrl {
-	bt {
-		bt_enable_h: bt-enable-h {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		bt_wake_l: bt-wake-l {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	fusb302x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	ir {
-		ir_int: ir-int {
-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	leds {
-		work_led_pin: work-led-pin {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		diy_led_pin: diy-led-pin {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie {
-		pcie_perst: pcie-perst {
-			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_pin: vsel1-pin {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_pin: vsel2-pin {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdcard {
-		sdmmc0_pwr_h: sdmmc0-pwr-h {
-			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec_en: vcc5v0_typec_en {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	disable-wp;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	vmmc-supply = <&vcc3v0_sd>;
-	vqmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-0 = <&spdif_bus_1>;
-
-	spdif_p0: port {
-		spdif_p0_0: endpoint {
-			remote-endpoint = <&dit_p0_0>;
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-t-opp.dtsi b/arch/arm/dts/rk3399-t-opp.dtsi
deleted file mode 100644
index 1ababadda9df..000000000000
--- a/arch/arm/dts/rk3399-t-opp.dtsi
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2022 Radxa Limited
- */
-
-/ {
-	cluster0_opp: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <875000 875000 1250000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <875000 875000 1250000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <900000 900000 1250000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <975000 975000 1250000>;
-		};
-	};
-
-	cluster1_opp: opp-table-1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <875000 875000 1250000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <875000 875000 1250000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <875000 875000 1250000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <925000 925000 1250000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1000000 1000000 1250000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1075000 1075000 1250000>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <1512000000>;
-			opp-microvolt = <1150000 1150000 1250000>;
-		};
-	};
-
-	gpu_opp_table: opp-table-2 {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <875000 875000 1150000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <875000 875000 1150000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <875000 875000 1150000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <975000 975000 1150000>;
-		};
-	};
-};
-
-&cpu_l0 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l1 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l2 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l3 {
-	operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_b0 {
-	operating-points-v2 = <&cluster1_opp>;
-};
-
-&cpu_b1 {
-	operating-points-v2 = <&cluster1_opp>;
-};
-
-&gpu {
-	operating-points-v2 = <&gpu_opp_table>;
-};
diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
deleted file mode 100644
index 6e12c5a920ca..000000000000
--- a/arch/arm/dts/rk3399.dtsi
+++ /dev/null
@@ -1,2945 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-#include <dt-bindings/clock/rk3399-cru.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/power/rk3399-power.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	compatible = "rockchip,rk3399";
-
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu_l0>;
-				};
-				core1 {
-					cpu = <&cpu_l1>;
-				};
-				core2 {
-					cpu = <&cpu_l2>;
-				};
-				core3 {
-					cpu = <&cpu_l3>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&cpu_b0>;
-				};
-				core1 {
-					cpu = <&cpu_b1>;
-				};
-			};
-		};
-
-		cpu_l0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <485>;
-			clocks = <&cru ARMCLKL>;
-			#cooling-cells = <2>; /* min followed by max */
-			dynamic-power-coefficient = <100>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-		};
-
-		cpu_l1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <485>;
-			clocks = <&cru ARMCLKL>;
-			#cooling-cells = <2>; /* min followed by max */
-			dynamic-power-coefficient = <100>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-		};
-
-		cpu_l2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <485>;
-			clocks = <&cru ARMCLKL>;
-			#cooling-cells = <2>; /* min followed by max */
-			dynamic-power-coefficient = <100>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-		};
-
-		cpu_l3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <485>;
-			clocks = <&cru ARMCLKL>;
-			#cooling-cells = <2>; /* min followed by max */
-			dynamic-power-coefficient = <100>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-		};
-
-		cpu_b0: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			clocks = <&cru ARMCLKB>;
-			#cooling-cells = <2>; /* min followed by max */
-			dynamic-power-coefficient = <436>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-
-			thermal-idle {
-				#cooling-cells = <2>;
-				duration-us = <10000>;
-				exit-latency-us = <500>;
-			};
-		};
-
-		cpu_b1: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <0x0 0x101>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			clocks = <&cru ARMCLKB>;
-			#cooling-cells = <2>; /* min followed by max */
-			dynamic-power-coefficient = <436>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-
-			thermal-idle {
-				#cooling-cells = <2>;
-				duration-us = <10000>;
-				exit-latency-us = <500>;
-			};
-		};
-
-		idle-states {
-			entry-method = "psci";
-
-			CPU_SLEEP: cpu-sleep {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				arm,psci-suspend-param = <0x0010000>;
-				entry-latency-us = <120>;
-				exit-latency-us = <250>;
-				min-residency-us = <900>;
-			};
-
-			CLUSTER_SLEEP: cluster-sleep {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				arm,psci-suspend-param = <0x1010000>;
-				entry-latency-us = <400>;
-				exit-latency-us = <500>;
-				min-residency-us = <2000>;
-			};
-		};
-	};
-
-	display-subsystem {
-		compatible = "rockchip,display-subsystem";
-		ports = <&vopl_out>, <&vopb_out>;
-	};
-
-	dmc: memory-controller {
-		compatible = "rockchip,rk3399-dmc";
-		rockchip,pmu = <&pmugrf>;
-		devfreq-events = <&dfi>;
-		clocks = <&cru SCLK_DDRC>;
-		clock-names = "dmc_clk";
-		status = "disabled";
-	};
-
-	pmu_a53 {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
-	};
-
-	pmu_a72 {
-		compatible = "arm,cortex-a72-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
-		arm,no-tick-in-suspend;
-	};
-
-	xin24m: xin24m {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xin24m";
-		#clock-cells = <0>;
-	};
-
-	pcie0: pcie@f8000000 {
-		compatible = "rockchip,rk3399-pcie";
-		reg = <0x0 0xf8000000 0x0 0x2000000>,
-		      <0x0 0xfd000000 0x0 0x1000000>;
-		reg-names = "axi-base", "apb-base";
-		device_type = "pci";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		aspm-no-l0s;
-		bus-range = <0x0 0x1f>;
-		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
-			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
-		clock-names = "aclk", "aclk-perf",
-			      "hclk", "pm";
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "sys", "legacy", "client";
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-				<0 0 0 2 &pcie0_intc 1>,
-				<0 0 0 3 &pcie0_intc 2>,
-				<0 0 0 4 &pcie0_intc 3>;
-		max-link-speed = <1>;
-		msi-map = <0x0 &its 0x0 0x1000>;
-		phys = <&pcie_phy 0>, <&pcie_phy 1>,
-		       <&pcie_phy 2>, <&pcie_phy 3>;
-		phy-names = "pcie-phy-0", "pcie-phy-1",
-			    "pcie-phy-2", "pcie-phy-3";
-		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
-			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
-		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
-			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
-			 <&cru SRST_A_PCIE>;
-		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
-			      "pm", "pclk", "aclk";
-		status = "disabled";
-
-		pcie0_intc: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-	pcie0_ep: pcie-ep@f8000000 {
-		compatible = "rockchip,rk3399-pcie-ep";
-		reg = <0x0 0xfd000000 0x0 0x1000000>,
-		      <0x0 0xfa000000 0x0 0x2000000>;
-		reg-names = "apb-base", "mem-base";
-		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
-			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
-		clock-names = "aclk", "aclk-perf",
-			      "hclk", "pm";
-		max-functions = /bits/ 8 <8>;
-		num-lanes = <4>;
-		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
-			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
-			 <&cru SRST_A_PCIE>;
-		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
-			      "pm", "pclk", "aclk";
-		phys = <&pcie_phy 0>, <&pcie_phy 1>,
-		       <&pcie_phy 2>, <&pcie_phy 3>;
-		phy-names = "pcie-phy-0", "pcie-phy-1",
-			    "pcie-phy-2", "pcie-phy-3";
-		rockchip,max-outbound-regions = <32>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_clkreqnb_cpm>;
-		status = "disabled";
-	};
-
-	gmac: ethernet@fe300000 {
-		compatible = "rockchip,rk3399-gmac";
-		reg = <0x0 0xfe300000 0x0 0x10000>;
-		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "macirq";
-		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
-			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
-			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
-			 <&cru PCLK_GMAC>;
-		clock-names = "stmmaceth", "mac_clk_rx",
-			      "mac_clk_tx", "clk_mac_ref",
-			      "clk_mac_refout", "aclk_mac",
-			      "pclk_mac";
-		power-domains = <&power RK3399_PD_GMAC>;
-		resets = <&cru SRST_A_GMAC>;
-		reset-names = "stmmaceth";
-		rockchip,grf = <&grf>;
-		snps,txpbl = <0x4>;
-		status = "disabled";
-	};
-
-	sdio0: mmc@fe310000 {
-		compatible = "rockchip,rk3399-dw-mshc",
-			     "rockchip,rk3288-dw-mshc";
-		reg = <0x0 0xfe310000 0x0 0x4000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
-		max-frequency = <150000000>;
-		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
-			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		fifo-depth = <0x100>;
-		power-domains = <&power RK3399_PD_SDIOAUDIO>;
-		resets = <&cru SRST_SDIO0>;
-		reset-names = "reset";
-		status = "disabled";
-	};
-
-	sdmmc: mmc@fe320000 {
-		compatible = "rockchip,rk3399-dw-mshc",
-			     "rockchip,rk3288-dw-mshc";
-		reg = <0x0 0xfe320000 0x0 0x4000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
-		max-frequency = <150000000>;
-		assigned-clocks = <&cru HCLK_SD>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
-			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		fifo-depth = <0x100>;
-		power-domains = <&power RK3399_PD_SD>;
-		resets = <&cru SRST_SDMMC>;
-		reset-names = "reset";
-		status = "disabled";
-	};
-
-	sdhci: mmc@fe330000 {
-		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
-		reg = <0x0 0xfe330000 0x0 0x10000>;
-		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
-		arasan,soc-ctl-syscon = <&grf>;
-		assigned-clocks = <&cru SCLK_EMMC>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
-		clock-names = "clk_xin", "clk_ahb";
-		clock-output-names = "emmc_cardclock";
-		#clock-cells = <0>;
-		phys = <&emmc_phy>;
-		phy-names = "phy_arasan";
-		power-domains = <&power RK3399_PD_EMMC>;
-		disable-cqe-dcmd;
-		status = "disabled";
-	};
-
-	usb_host0_ehci: usb@fe380000 {
-		compatible = "generic-ehci";
-		reg = <0x0 0xfe380000 0x0 0x20000>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
-			 <&u2phy0>;
-		phys = <&u2phy0_host>;
-		phy-names = "usb";
-		status = "disabled";
-	};
-
-	usb_host0_ohci: usb@fe3a0000 {
-		compatible = "generic-ohci";
-		reg = <0x0 0xfe3a0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
-			 <&u2phy0>;
-		phys = <&u2phy0_host>;
-		phy-names = "usb";
-		status = "disabled";
-	};
-
-	usb_host1_ehci: usb@fe3c0000 {
-		compatible = "generic-ehci";
-		reg = <0x0 0xfe3c0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
-			 <&u2phy1>;
-		phys = <&u2phy1_host>;
-		phy-names = "usb";
-		status = "disabled";
-	};
-
-	usb_host1_ohci: usb@fe3e0000 {
-		compatible = "generic-ohci";
-		reg = <0x0 0xfe3e0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
-			 <&u2phy1>;
-		phys = <&u2phy1_host>;
-		phy-names = "usb";
-		status = "disabled";
-	};
-
-	debug@fe430000 {
-		compatible = "arm,coresight-cpu-debug", "arm,primecell";
-		reg = <0 0xfe430000 0 0x1000>;
-		clocks = <&cru PCLK_COREDBG_L>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu_l0>;
-	};
-
-	debug@fe432000 {
-		compatible = "arm,coresight-cpu-debug", "arm,primecell";
-		reg = <0 0xfe432000 0 0x1000>;
-		clocks = <&cru PCLK_COREDBG_L>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu_l1>;
-	};
-
-	debug@fe434000 {
-		compatible = "arm,coresight-cpu-debug", "arm,primecell";
-		reg = <0 0xfe434000 0 0x1000>;
-		clocks = <&cru PCLK_COREDBG_L>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu_l2>;
-	};
-
-	debug@fe436000 {
-		compatible = "arm,coresight-cpu-debug", "arm,primecell";
-		reg = <0 0xfe436000 0 0x1000>;
-		clocks = <&cru PCLK_COREDBG_L>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu_l3>;
-	};
-
-	debug@fe610000 {
-		compatible = "arm,coresight-cpu-debug", "arm,primecell";
-		reg = <0 0xfe610000 0 0x1000>;
-		clocks = <&cru PCLK_COREDBG_B>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu_b0>;
-	};
-
-	debug@fe710000 {
-		compatible = "arm,coresight-cpu-debug", "arm,primecell";
-		reg = <0 0xfe710000 0 0x1000>;
-		clocks = <&cru PCLK_COREDBG_B>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu_b1>;
-	};
-
-	usbdrd3_0: usb@fe800000 {
-		compatible = "rockchip,rk3399-dwc3";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
-			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
-			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
-		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
-			      "aclk_usb3", "grf_clk";
-		resets = <&cru SRST_A_USB3_OTG0>;
-		reset-names = "usb3-otg";
-		status = "disabled";
-
-		usbdrd_dwc3_0: usb@fe800000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0xfe800000 0x0 0x100000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
-				 <&cru SCLK_USB3OTG0_SUSPEND>;
-			clock-names = "ref", "bus_early", "suspend";
-			dr_mode = "otg";
-			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
-			phy_type = "utmi_wide";
-			snps,dis_enblslpm_quirk;
-			snps,dis-u2-freeclk-exists-quirk;
-			snps,dis_u2_susphy_quirk;
-			snps,dis-del-phy-power-chg-quirk;
-			snps,dis-tx-ipgap-linecheck-quirk;
-			power-domains = <&power RK3399_PD_USB3>;
-			status = "disabled";
-		};
-	};
-
-	usbdrd3_1: usb@fe900000 {
-		compatible = "rockchip,rk3399-dwc3";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
-			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
-			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
-		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
-			      "aclk_usb3", "grf_clk";
-		resets = <&cru SRST_A_USB3_OTG1>;
-		reset-names = "usb3-otg";
-		status = "disabled";
-
-		usbdrd_dwc3_1: usb@fe900000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0xfe900000 0x0 0x100000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
-				 <&cru SCLK_USB3OTG1_SUSPEND>;
-			clock-names = "ref", "bus_early", "suspend";
-			dr_mode = "otg";
-			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
-			phy_type = "utmi_wide";
-			snps,dis_enblslpm_quirk;
-			snps,dis-u2-freeclk-exists-quirk;
-			snps,dis_u2_susphy_quirk;
-			snps,dis-del-phy-power-chg-quirk;
-			snps,dis-tx-ipgap-linecheck-quirk;
-			power-domains = <&power RK3399_PD_USB3>;
-			status = "disabled";
-		};
-	};
-
-	cdn_dp: dp@fec00000 {
-		compatible = "rockchip,rk3399-cdn-dp";
-		reg = <0x0 0xfec00000 0x0 0x100000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
-		assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
-		assigned-clock-rates = <100000000>, <200000000>;
-		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
-			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
-		clock-names = "core-clk", "pclk", "spdif", "grf";
-		phys = <&tcphy0_dp>, <&tcphy1_dp>;
-		power-domains = <&power RK3399_PD_HDCP>;
-		resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
-			 <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
-		reset-names = "spdif", "dptx", "apb", "core";
-		rockchip,grf = <&grf>;
-		#sound-dai-cells = <1>;
-		status = "disabled";
-
-		ports {
-			dp_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_dp>;
-				};
-
-				dp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_dp>;
-				};
-			};
-		};
-	};
-
-	gic: interrupt-controller@fee00000 {
-		compatible = "arm,gic-v3";
-		#interrupt-cells = <4>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		interrupt-controller;
-
-		reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
-		      <0x0 0xfef00000 0 0xc0000>, /* GICR */
-		      <0x0 0xfff00000 0 0x10000>, /* GICC */
-		      <0x0 0xfff10000 0 0x10000>, /* GICH */
-		      <0x0 0xfff20000 0 0x10000>; /* GICV */
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
-		its: msi-controller@fee20000 {
-			compatible = "arm,gic-v3-its";
-			msi-controller;
-			#msi-cells = <1>;
-			reg = <0x0 0xfee20000 0x0 0x20000>;
-		};
-
-		ppi-partitions {
-			ppi_cluster0: interrupt-partition-0 {
-				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
-			};
-
-			ppi_cluster1: interrupt-partition-1 {
-				affinity = <&cpu_b0 &cpu_b1>;
-			};
-		};
-	};
-
-	saradc: saradc@ff100000 {
-		compatible = "rockchip,rk3399-saradc";
-		reg = <0x0 0xff100000 0x0 0x100>;
-		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
-		#io-channel-cells = <1>;
-		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
-		clock-names = "saradc", "apb_pclk";
-		resets = <&cru SRST_P_SARADC>;
-		reset-names = "saradc-apb";
-		status = "disabled";
-	};
-
-	crypto0: crypto@ff8b0000 {
-		compatible = "rockchip,rk3399-crypto";
-		reg = <0x0 0xff8b0000 0x0 0x4000>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
-		clock-names = "hclk_master", "hclk_slave", "sclk";
-		resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
-		reset-names = "master", "slave", "crypto-rst";
-	};
-
-	crypto1: crypto@ff8b8000 {
-		compatible = "rockchip,rk3399-crypto";
-		reg = <0x0 0xff8b8000 0x0 0x4000>;
-		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
-		clock-names = "hclk_master", "hclk_slave", "sclk";
-		resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
-		reset-names = "master", "slave", "crypto-rst";
-	};
-
-	i2c1: i2c@ff110000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff110000 0x0 0x1000>;
-		assigned-clocks = <&cru SCLK_I2C1>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ff120000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff120000 0x0 0x1000>;
-		assigned-clocks = <&cru SCLK_I2C2>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ff130000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff130000 0x0 0x1000>;
-		assigned-clocks = <&cru SCLK_I2C3>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@ff140000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff140000 0x0 0x1000>;
-		assigned-clocks = <&cru SCLK_I2C5>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c6: i2c@ff150000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff150000 0x0 0x1000>;
-		assigned-clocks = <&cru SCLK_I2C6>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c7: i2c@ff160000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff160000 0x0 0x1000>;
-		assigned-clocks = <&cru SCLK_I2C7>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	uart0: serial@ff180000 {
-		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff180000 0x0 0x100>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_xfer>;
-		status = "disabled";
-	};
-
-	uart1: serial@ff190000 {
-		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff190000 0x0 0x100>;
-		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
-		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_xfer>;
-		status = "disabled";
-	};
-
-	uart2: serial@ff1a0000 {
-		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff1a0000 0x0 0x100>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2c_xfer>;
-		status = "disabled";
-	};
-
-	uart3: serial@ff1b0000 {
-		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff1b0000 0x0 0x100>;
-		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
-		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart3_xfer>;
-		status = "disabled";
-	};
-
-	spi0: spi@ff1c0000 {
-		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
-		reg = <0x0 0xff1c0000 0x0 0x1000>;
-		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
-		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_peri 10>, <&dmac_peri 11>;
-		dma-names = "tx", "rx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi1: spi@ff1d0000 {
-		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
-		reg = <0x0 0xff1d0000 0x0 0x1000>;
-		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
-		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_peri 12>, <&dmac_peri 13>;
-		dma-names = "tx", "rx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi2: spi@ff1e0000 {
-		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
-		reg = <0x0 0xff1e0000 0x0 0x1000>;
-		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
-		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_peri 14>, <&dmac_peri 15>;
-		dma-names = "tx", "rx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi4: spi@ff1f0000 {
-		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
-		reg = <0x0 0xff1f0000 0x0 0x1000>;
-		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
-		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_peri 18>, <&dmac_peri 19>;
-		dma-names = "tx", "rx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi5: spi@ff200000 {
-		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
-		reg = <0x0 0xff200000 0x0 0x1000>;
-		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
-		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_bus 8>, <&dmac_bus 9>;
-		dma-names = "tx", "rx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
-		power-domains = <&power RK3399_PD_SDIOAUDIO>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	thermal_zones: thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsadc 0>;
-
-			trips {
-				cpu_alert0: cpu_alert0 {
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_alert1: cpu_alert1 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit: cpu_crit {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert0>;
-					cooling-device =
-						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu_alert1>;
-					cooling-device =
-						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		gpu_thermal: gpu-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsadc 1>;
-
-			trips {
-				gpu_alert0: gpu_alert0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				gpu_crit: gpu_crit {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&gpu_alert0>;
-					cooling-device =
-						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	tsadc: tsadc@ff260000 {
-		compatible = "rockchip,rk3399-tsadc";
-		reg = <0x0 0xff260000 0x0 0x100>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
-		assigned-clocks = <&cru SCLK_TSADC>;
-		assigned-clock-rates = <750000>;
-		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
-		clock-names = "tsadc", "apb_pclk";
-		resets = <&cru SRST_TSADC>;
-		reset-names = "tsadc-apb";
-		rockchip,grf = <&grf>;
-		rockchip,hw-tshut-temp = <95000>;
-		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_pin>;
-		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_pin>;
-		#thermal-sensor-cells = <1>;
-		status = "disabled";
-	};
-
-	qos_emmc: qos@ffa58000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa58000 0x0 0x20>;
-	};
-
-	qos_gmac: qos@ffa5c000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa5c000 0x0 0x20>;
-	};
-
-	qos_pcie: qos@ffa60080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa60080 0x0 0x20>;
-	};
-
-	qos_usb_host0: qos@ffa60100 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa60100 0x0 0x20>;
-	};
-
-	qos_usb_host1: qos@ffa60180 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa60180 0x0 0x20>;
-	};
-
-	qos_usb_otg0: qos@ffa70000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa70000 0x0 0x20>;
-	};
-
-	qos_usb_otg1: qos@ffa70080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa70080 0x0 0x20>;
-	};
-
-	qos_sd: qos@ffa74000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa74000 0x0 0x20>;
-	};
-
-	qos_sdioaudio: qos@ffa76000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa76000 0x0 0x20>;
-	};
-
-	qos_hdcp: qos@ffa90000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa90000 0x0 0x20>;
-	};
-
-	qos_iep: qos@ffa98000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffa98000 0x0 0x20>;
-	};
-
-	qos_isp0_m0: qos@ffaa0000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffaa0000 0x0 0x20>;
-	};
-
-	qos_isp0_m1: qos@ffaa0080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffaa0080 0x0 0x20>;
-	};
-
-	qos_isp1_m0: qos@ffaa8000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffaa8000 0x0 0x20>;
-	};
-
-	qos_isp1_m1: qos@ffaa8080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffaa8080 0x0 0x20>;
-	};
-
-	qos_rga_r: qos@ffab0000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffab0000 0x0 0x20>;
-	};
-
-	qos_rga_w: qos@ffab0080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffab0080 0x0 0x20>;
-	};
-
-	qos_video_m0: qos@ffab8000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffab8000 0x0 0x20>;
-	};
-
-	qos_video_m1_r: qos@ffac0000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffac0000 0x0 0x20>;
-	};
-
-	qos_video_m1_w: qos@ffac0080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffac0080 0x0 0x20>;
-	};
-
-	qos_vop_big_r: qos@ffac8000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffac8000 0x0 0x20>;
-	};
-
-	qos_vop_big_w: qos@ffac8080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffac8080 0x0 0x20>;
-	};
-
-	qos_vop_little: qos@ffad0000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffad0000 0x0 0x20>;
-	};
-
-	qos_perihp: qos@ffad8080 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffad8080 0x0 0x20>;
-	};
-
-	qos_gpu: qos@ffae0000 {
-		compatible = "rockchip,rk3399-qos", "syscon";
-		reg = <0x0 0xffae0000 0x0 0x20>;
-	};
-
-	pmu: power-management@ff310000 {
-		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
-		reg = <0x0 0xff310000 0x0 0x1000>;
-
-		/*
-		 * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
-		 * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
-		 * Some of the power domains are grouped together for every
-		 * voltage domain.
-		 * The detail contents as below.
-		 */
-		power: power-controller {
-			compatible = "rockchip,rk3399-power-controller";
-			#power-domain-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* These power domains are grouped by VD_CENTER */
-			power-domain@RK3399_PD_IEP {
-				reg = <RK3399_PD_IEP>;
-				clocks = <&cru ACLK_IEP>,
-					 <&cru HCLK_IEP>;
-				pm_qos = <&qos_iep>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_RGA {
-				reg = <RK3399_PD_RGA>;
-				clocks = <&cru ACLK_RGA>,
-					 <&cru HCLK_RGA>;
-				pm_qos = <&qos_rga_r>,
-					 <&qos_rga_w>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_VCODEC {
-				reg = <RK3399_PD_VCODEC>;
-				clocks = <&cru ACLK_VCODEC>,
-					 <&cru HCLK_VCODEC>;
-				pm_qos = <&qos_video_m0>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_VDU {
-				reg = <RK3399_PD_VDU>;
-				clocks = <&cru ACLK_VDU>,
-					 <&cru HCLK_VDU>,
-					 <&cru SCLK_VDU_CA>,
-					 <&cru SCLK_VDU_CORE>;
-				pm_qos = <&qos_video_m1_r>,
-					 <&qos_video_m1_w>;
-				#power-domain-cells = <0>;
-			};
-
-			/* These power domains are grouped by VD_GPU */
-			power-domain@RK3399_PD_GPU {
-				reg = <RK3399_PD_GPU>;
-				clocks = <&cru ACLK_GPU>;
-				pm_qos = <&qos_gpu>;
-				#power-domain-cells = <0>;
-			};
-
-			/* These power domains are grouped by VD_LOGIC */
-			power-domain@RK3399_PD_EDP {
-				reg = <RK3399_PD_EDP>;
-				clocks = <&cru PCLK_EDP_CTRL>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_EMMC {
-				reg = <RK3399_PD_EMMC>;
-				clocks = <&cru ACLK_EMMC>;
-				pm_qos = <&qos_emmc>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_GMAC {
-				reg = <RK3399_PD_GMAC>;
-				clocks = <&cru ACLK_GMAC>,
-					 <&cru PCLK_GMAC>;
-				pm_qos = <&qos_gmac>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_SD {
-				reg = <RK3399_PD_SD>;
-				clocks = <&cru HCLK_SDMMC>,
-					 <&cru SCLK_SDMMC>;
-				pm_qos = <&qos_sd>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_SDIOAUDIO {
-				reg = <RK3399_PD_SDIOAUDIO>;
-				clocks = <&cru HCLK_SDIO>;
-				pm_qos = <&qos_sdioaudio>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_TCPD0 {
-				reg = <RK3399_PD_TCPD0>;
-				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
-					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_TCPD1 {
-				reg = <RK3399_PD_TCPD1>;
-				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
-					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_USB3 {
-				reg = <RK3399_PD_USB3>;
-				clocks = <&cru ACLK_USB3>;
-				pm_qos = <&qos_usb_otg0>,
-					 <&qos_usb_otg1>;
-				#power-domain-cells = <0>;
-			};
-			power-domain@RK3399_PD_VIO {
-				reg = <RK3399_PD_VIO>;
-				#power-domain-cells = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				power-domain@RK3399_PD_HDCP {
-					reg = <RK3399_PD_HDCP>;
-					clocks = <&cru ACLK_HDCP>,
-						 <&cru HCLK_HDCP>,
-						 <&cru PCLK_HDCP>;
-					pm_qos = <&qos_hdcp>;
-					#power-domain-cells = <0>;
-				};
-				power-domain@RK3399_PD_ISP0 {
-					reg = <RK3399_PD_ISP0>;
-					clocks = <&cru ACLK_ISP0>,
-						 <&cru HCLK_ISP0>;
-					pm_qos = <&qos_isp0_m0>,
-						 <&qos_isp0_m1>;
-					#power-domain-cells = <0>;
-				};
-				power-domain@RK3399_PD_ISP1 {
-					reg = <RK3399_PD_ISP1>;
-					clocks = <&cru ACLK_ISP1>,
-						 <&cru HCLK_ISP1>;
-					pm_qos = <&qos_isp1_m0>,
-						 <&qos_isp1_m1>;
-					#power-domain-cells = <0>;
-				};
-				power-domain@RK3399_PD_VO {
-					reg = <RK3399_PD_VO>;
-					#power-domain-cells = <1>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					power-domain@RK3399_PD_VOPB {
-						reg = <RK3399_PD_VOPB>;
-						clocks = <&cru ACLK_VOP0>,
-							 <&cru HCLK_VOP0>;
-						pm_qos = <&qos_vop_big_r>,
-							 <&qos_vop_big_w>;
-						#power-domain-cells = <0>;
-					};
-					power-domain@RK3399_PD_VOPL {
-						reg = <RK3399_PD_VOPL>;
-						clocks = <&cru ACLK_VOP1>,
-							 <&cru HCLK_VOP1>;
-						pm_qos = <&qos_vop_little>;
-						#power-domain-cells = <0>;
-					};
-				};
-			};
-		};
-	};
-
-	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
-		reg = <0x0 0xff320000 0x0 0x1000>;
-
-		pmu_io_domains: io-domains {
-			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
-			status = "disabled";
-		};
-	};
-
-	spi3: spi@ff350000 {
-		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
-		reg = <0x0 0xff350000 0x0 0x1000>;
-		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
-		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	uart4: serial@ff370000 {
-		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff370000 0x0 0x100>;
-		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
-		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart4_xfer>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@ff3c0000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff3c0000 0x0 0x1000>;
-		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@ff3d0000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff3d0000 0x0 0x1000>;
-		assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c8: i2c@ff3e0000 {
-		compatible = "rockchip,rk3399-i2c";
-		reg = <0x0 0xff3e0000 0x0 0x1000>;
-		assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
-		assigned-clock-rates = <200000000>;
-		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
-		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_xfer>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	pwm0: pwm@ff420000 {
-		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
-		reg = <0x0 0xff420000 0x0 0x10>;
-		#pwm-cells = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm0_pin>;
-		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		status = "disabled";
-	};
-
-	pwm1: pwm@ff420010 {
-		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
-		reg = <0x0 0xff420010 0x0 0x10>;
-		#pwm-cells = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm1_pin>;
-		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		status = "disabled";
-	};
-
-	pwm2: pwm@ff420020 {
-		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
-		reg = <0x0 0xff420020 0x0 0x10>;
-		#pwm-cells = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm2_pin>;
-		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		status = "disabled";
-	};
-
-	pwm3: pwm@ff420030 {
-		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
-		reg = <0x0 0xff420030 0x0 0x10>;
-		#pwm-cells = <3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm3a_pin>;
-		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		status = "disabled";
-	};
-
-	dfi: dfi@ff630000 {
-		reg = <0x00 0xff630000 0x00 0x4000>;
-		compatible = "rockchip,rk3399-dfi";
-		rockchip,pmu = <&pmugrf>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_DDR_MON>;
-		clock-names = "pclk_ddr_mon";
-	};
-
-	vpu: video-codec@ff650000 {
-		compatible = "rockchip,rk3399-vpu";
-		reg = <0x0 0xff650000 0x0 0x800>;
-		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "vepu", "vdpu";
-		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
-		clock-names = "aclk", "hclk";
-		iommus = <&vpu_mmu>;
-		power-domains = <&power RK3399_PD_VCODEC>;
-	};
-
-	vpu_mmu: iommu@ff650800 {
-		compatible = "rockchip,iommu";
-		reg = <0x0 0xff650800 0x0 0x40>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-		power-domains = <&power RK3399_PD_VCODEC>;
-	};
-
-	vdec: video-codec@ff660000 {
-		compatible = "rockchip,rk3399-vdec";
-		reg = <0x0 0xff660000 0x0 0x480>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
-			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
-		clock-names = "axi", "ahb", "cabac", "core";
-		iommus = <&vdec_mmu>;
-		power-domains = <&power RK3399_PD_VDU>;
-	};
-
-	vdec_mmu: iommu@ff660480 {
-		compatible = "rockchip,iommu";
-		reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
-		clock-names = "aclk", "iface";
-		power-domains = <&power RK3399_PD_VDU>;
-		#iommu-cells = <0>;
-	};
-
-	iep_mmu: iommu@ff670800 {
-		compatible = "rockchip,iommu";
-		reg = <0x0 0xff670800 0x0 0x40>;
-		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-		status = "disabled";
-	};
-
-	rga: rga@ff680000 {
-		compatible = "rockchip,rk3399-rga";
-		reg = <0x0 0xff680000 0x0 0x10000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
-		clock-names = "aclk", "hclk", "sclk";
-		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
-		reset-names = "core", "axi", "ahb";
-		power-domains = <&power RK3399_PD_RGA>;
-	};
-
-	efuse0: efuse@ff690000 {
-		compatible = "rockchip,rk3399-efuse";
-		reg = <0x0 0xff690000 0x0 0x80>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		clocks = <&cru PCLK_EFUSE1024NS>;
-		clock-names = "pclk_efuse";
-
-		/* Data cells */
-		cpu_id: cpu-id@7 {
-			reg = <0x07 0x10>;
-		};
-		cpub_leakage: cpu-leakage@17 {
-			reg = <0x17 0x1>;
-		};
-		gpu_leakage: gpu-leakage@18 {
-			reg = <0x18 0x1>;
-		};
-		center_leakage: center-leakage@19 {
-			reg = <0x19 0x1>;
-		};
-		cpul_leakage: cpu-leakage@1a {
-			reg = <0x1a 0x1>;
-		};
-		logic_leakage: logic-leakage@1b {
-			reg = <0x1b 0x1>;
-		};
-		wafer_info: wafer-info@1c {
-			reg = <0x1c 0x1>;
-		};
-	};
-
-	dmac_bus: dma-controller@ff6d0000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x0 0xff6d0000 0x0 0x4000>;
-		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
-		#dma-cells = <1>;
-		arm,pl330-periph-burst;
-		clocks = <&cru ACLK_DMAC0_PERILP>;
-		clock-names = "apb_pclk";
-	};
-
-	dmac_peri: dma-controller@ff6e0000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x0 0xff6e0000 0x0 0x4000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
-		#dma-cells = <1>;
-		arm,pl330-periph-burst;
-		clocks = <&cru ACLK_DMAC1_PERILP>;
-		clock-names = "apb_pclk";
-	};
-
-	pmucru: clock-controller@ff750000 {
-		compatible = "rockchip,rk3399-pmucru";
-		reg = <0x0 0xff750000 0x0 0x1000>;
-		clocks = <&xin24m>;
-		clock-names = "xin24m";
-		rockchip,grf = <&pmugrf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		assigned-clocks = <&pmucru PLL_PPLL>;
-		assigned-clock-rates = <676000000>;
-	};
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3399-cru";
-		reg = <0x0 0xff760000 0x0 0x1000>;
-		clocks = <&xin24m>;
-		clock-names = "xin24m";
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		assigned-clocks =
-			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
-			<&cru PLL_NPLL>,
-			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
-			<&cru PCLK_PERIHP>,
-			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
-			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
-			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
-			<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
-			<&cru ACLK_GIC_PRE>,
-			<&cru PCLK_DDR>,
-			<&cru ACLK_VDU>;
-		assigned-clock-rates =
-			 <594000000>,  <800000000>,
-			<1000000000>,
-			 <150000000>,   <75000000>,
-			  <37500000>,
-			 <100000000>,  <100000000>,
-			  <50000000>, <600000000>,
-			 <100000000>,   <50000000>,
-			 <400000000>, <400000000>,
-			 <200000000>,
-			 <200000000>,
-			 <400000000>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
-		reg = <0x0 0xff770000 0x0 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		io_domains: io-domains {
-			compatible = "rockchip,rk3399-io-voltage-domain";
-			status = "disabled";
-		};
-
-		mipi_dphy_rx0: mipi-dphy-rx0 {
-			compatible = "rockchip,rk3399-mipi-dphy-rx0";
-			clocks = <&cru SCLK_MIPIDPHY_REF>,
-				 <&cru SCLK_DPHY_RX0_CFG>,
-				 <&cru PCLK_VIO_GRF>;
-			clock-names = "dphy-ref", "dphy-cfg", "grf";
-			power-domains = <&power RK3399_PD_VIO>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		u2phy0: usb2phy@e450 {
-			compatible = "rockchip,rk3399-usb2phy";
-			reg = <0xe450 0x10>;
-			clocks = <&cru SCLK_USB2PHY0_REF>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-			clock-output-names = "clk_usbphy0_480m";
-			status = "disabled";
-
-			u2phy0_host: host-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "linestate";
-				status = "disabled";
-			};
-
-			u2phy0_otg: otg-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "otg-bvalid", "otg-id",
-						  "linestate";
-				status = "disabled";
-			};
-		};
-
-		u2phy1: usb2phy@e460 {
-			compatible = "rockchip,rk3399-usb2phy";
-			reg = <0xe460 0x10>;
-			clocks = <&cru SCLK_USB2PHY1_REF>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-			clock-output-names = "clk_usbphy1_480m";
-			status = "disabled";
-
-			u2phy1_host: host-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "linestate";
-				status = "disabled";
-			};
-
-			u2phy1_otg: otg-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "otg-bvalid", "otg-id",
-						  "linestate";
-				status = "disabled";
-			};
-		};
-
-		emmc_phy: phy@f780 {
-			compatible = "rockchip,rk3399-emmc-phy";
-			reg = <0xf780 0x24>;
-			clocks = <&sdhci>;
-			clock-names = "emmcclk";
-			drive-impedance-ohm = <50>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		pcie_phy: pcie-phy {
-			compatible = "rockchip,rk3399-pcie-phy";
-			clocks = <&cru SCLK_PCIEPHY_REF>;
-			clock-names = "refclk";
-			#phy-cells = <1>;
-			resets = <&cru SRST_PCIEPHY>;
-			reset-names = "phy";
-			status = "disabled";
-		};
-	};
-
-	tcphy0: phy@ff7c0000 {
-		compatible = "rockchip,rk3399-typec-phy";
-		reg = <0x0 0xff7c0000 0x0 0x40000>;
-		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
-			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
-		clock-names = "tcpdcore", "tcpdphy-ref";
-		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
-		assigned-clock-rates = <50000000>;
-		power-domains = <&power RK3399_PD_TCPD0>;
-		resets = <&cru SRST_UPHY0>,
-			 <&cru SRST_UPHY0_PIPE_L00>,
-			 <&cru SRST_P_UPHY0_TCPHY>;
-		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
-		rockchip,grf = <&grf>;
-		status = "disabled";
-
-		tcphy0_dp: dp-port {
-			#phy-cells = <0>;
-		};
-
-		tcphy0_usb3: usb3-port {
-			#phy-cells = <0>;
-		};
-	};
-
-	tcphy1: phy@ff800000 {
-		compatible = "rockchip,rk3399-typec-phy";
-		reg = <0x0 0xff800000 0x0 0x40000>;
-		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
-			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
-		clock-names = "tcpdcore", "tcpdphy-ref";
-		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
-		assigned-clock-rates = <50000000>;
-		power-domains = <&power RK3399_PD_TCPD1>;
-		resets = <&cru SRST_UPHY1>,
-			 <&cru SRST_UPHY1_PIPE_L00>,
-			 <&cru SRST_P_UPHY1_TCPHY>;
-		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
-		rockchip,grf = <&grf>;
-		status = "disabled";
-
-		tcphy1_dp: dp-port {
-			#phy-cells = <0>;
-		};
-
-		tcphy1_usb3: usb3-port {
-			#phy-cells = <0>;
-		};
-	};
-
-	watchdog@ff848000 {
-		compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
-		reg = <0x0 0xff848000 0x0 0x100>;
-		clocks = <&cru PCLK_WDT>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
-	};
-
-	rktimer: rktimer@ff850000 {
-		compatible = "rockchip,rk3399-timer";
-		reg = <0x0 0xff850000 0x0 0x1000>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
-		clock-names = "pclk", "timer";
-	};
-
-	spdif: spdif@ff870000 {
-		compatible = "rockchip,rk3399-spdif";
-		reg = <0x0 0xff870000 0x0 0x1000>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_bus 7>;
-		dma-names = "tx";
-		clock-names = "mclk", "hclk";
-		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spdif_bus>;
-		power-domains = <&power RK3399_PD_SDIOAUDIO>;
-		#sound-dai-cells = <0>;
-		status = "disabled";
-	};
-
-	i2s0: i2s@ff880000 {
-		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
-		reg = <0x0 0xff880000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
-		dma-names = "tx", "rx";
-		clock-names = "i2s_clk", "i2s_hclk";
-		clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
-		pinctrl-names = "bclk_on", "bclk_off";
-		pinctrl-0 = <&i2s0_8ch_bus>;
-		pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
-		power-domains = <&power RK3399_PD_SDIOAUDIO>;
-		#sound-dai-cells = <0>;
-		status = "disabled";
-	};
-
-	i2s1: i2s@ff890000 {
-		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
-		reg = <0x0 0xff890000 0x0 0x1000>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
-		dma-names = "tx", "rx";
-		clock-names = "i2s_clk", "i2s_hclk";
-		clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_2ch_bus>;
-		power-domains = <&power RK3399_PD_SDIOAUDIO>;
-		#sound-dai-cells = <0>;
-		status = "disabled";
-	};
-
-	i2s2: i2s@ff8a0000 {
-		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
-		reg = <0x0 0xff8a0000 0x0 0x1000>;
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
-		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
-		dma-names = "tx", "rx";
-		clock-names = "i2s_clk", "i2s_hclk";
-		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
-		power-domains = <&power RK3399_PD_SDIOAUDIO>;
-		#sound-dai-cells = <0>;
-		status = "disabled";
-	};
-
-	vopl: vop@ff8f0000 {
-		compatible = "rockchip,rk3399-vop-lit";
-		reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
-		assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
-		assigned-clock-rates = <400000000>, <100000000>;
-		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
-		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
-		iommus = <&vopl_mmu>;
-		power-domains = <&power RK3399_PD_VOPL>;
-		resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
-		reset-names = "axi", "ahb", "dclk";
-		status = "disabled";
-
-		vopl_out: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vopl_out_mipi: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&mipi_in_vopl>;
-			};
-
-			vopl_out_edp: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&edp_in_vopl>;
-			};
-
-			vopl_out_hdmi: endpoint@2 {
-				reg = <2>;
-				remote-endpoint = <&hdmi_in_vopl>;
-			};
-
-			vopl_out_mipi1: endpoint@3 {
-				reg = <3>;
-				remote-endpoint = <&mipi1_in_vopl>;
-			};
-
-			vopl_out_dp: endpoint@4 {
-				reg = <4>;
-				remote-endpoint = <&dp_in_vopl>;
-			};
-		};
-	};
-
-	vopl_mmu: iommu@ff8f3f00 {
-		compatible = "rockchip,iommu";
-		reg = <0x0 0xff8f3f00 0x0 0x100>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
-		clock-names = "aclk", "iface";
-		power-domains = <&power RK3399_PD_VOPL>;
-		#iommu-cells = <0>;
-		status = "disabled";
-	};
-
-	vopb: vop@ff900000 {
-		compatible = "rockchip,rk3399-vop-big";
-		reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>;
-		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
-		assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
-		assigned-clock-rates = <400000000>, <100000000>;
-		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
-		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
-		iommus = <&vopb_mmu>;
-		power-domains = <&power RK3399_PD_VOPB>;
-		resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
-		reset-names = "axi", "ahb", "dclk";
-		status = "disabled";
-
-		vopb_out: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vopb_out_edp: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&edp_in_vopb>;
-			};
-
-			vopb_out_mipi: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&mipi_in_vopb>;
-			};
-
-			vopb_out_hdmi: endpoint@2 {
-				reg = <2>;
-				remote-endpoint = <&hdmi_in_vopb>;
-			};
-
-			vopb_out_mipi1: endpoint@3 {
-				reg = <3>;
-				remote-endpoint = <&mipi1_in_vopb>;
-			};
-
-			vopb_out_dp: endpoint@4 {
-				reg = <4>;
-				remote-endpoint = <&dp_in_vopb>;
-			};
-		};
-	};
-
-	vopb_mmu: iommu@ff903f00 {
-		compatible = "rockchip,iommu";
-		reg = <0x0 0xff903f00 0x0 0x100>;
-		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
-		clock-names = "aclk", "iface";
-		power-domains = <&power RK3399_PD_VOPB>;
-		#iommu-cells = <0>;
-		status = "disabled";
-	};
-
-	isp0: isp0@ff910000 {
-		compatible = "rockchip,rk3399-cif-isp";
-		reg = <0x0 0xff910000 0x0 0x4000>;
-		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_ISP0>,
-			 <&cru ACLK_ISP0_WRAPPER>,
-			 <&cru HCLK_ISP0_WRAPPER>;
-		clock-names = "isp", "aclk", "hclk";
-		iommus = <&isp0_mmu>;
-		phys = <&mipi_dphy_rx0>;
-		phy-names = "dphy";
-		power-domains = <&power RK3399_PD_ISP0>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	isp0_mmu: iommu@ff914000 {
-		compatible = "rockchip,iommu";
-		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
-		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-		power-domains = <&power RK3399_PD_ISP0>;
-		rockchip,disable-mmu-reset;
-	};
-
-	isp1: isp1@ff920000 {
-		compatible = "rockchip,rk3399-cif-isp";
-		reg = <0x0 0xff920000 0x0 0x4000>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_ISP1>,
-			 <&cru ACLK_ISP1_WRAPPER>,
-			 <&cru HCLK_ISP1_WRAPPER>;
-		clock-names = "isp", "aclk", "hclk";
-		iommus = <&isp1_mmu>;
-		phys = <&mipi_dsi1>;
-		phy-names = "dphy";
-		power-domains = <&power RK3399_PD_ISP1>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	isp1_mmu: iommu@ff924000 {
-		compatible = "rockchip,iommu";
-		reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-		power-domains = <&power RK3399_PD_ISP1>;
-		rockchip,disable-mmu-reset;
-	};
-
-	hdmi_sound: hdmi-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,name = "hdmi-sound";
-		status = "disabled";
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s2>;
-		};
-		simple-audio-card,codec {
-			sound-dai = <&hdmi>;
-		};
-	};
-
-	hdmi: hdmi@ff940000 {
-		compatible = "rockchip,rk3399-dw-hdmi";
-		reg = <0x0 0xff940000 0x0 0x20000>;
-		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_HDMI_CTRL>,
-			 <&cru SCLK_HDMI_SFR>,
-			 <&cru SCLK_HDMI_CEC>,
-			 <&cru PCLK_VIO_GRF>,
-			 <&cru PLL_VPLL>;
-		clock-names = "iahb", "isfr", "cec", "grf", "ref";
-		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
-		rockchip,grf = <&grf>;
-		#sound-dai-cells = <0>;
-		status = "disabled";
-
-		ports {
-			hdmi_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				hdmi_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_hdmi>;
-				};
-				hdmi_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_hdmi>;
-				};
-			};
-		};
-	};
-
-	mipi_dsi: dsi@ff960000 {
-		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
-		reg = <0x0 0xff960000 0x0 0x8000>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
-			 <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
-		clock-names = "ref", "pclk", "phy_cfg", "grf";
-		power-domains = <&power RK3399_PD_VIO>;
-		resets = <&cru SRST_P_MIPI_DSI0>;
-		reset-names = "apb";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mipi_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_mipi>;
-				};
-
-				mipi_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_mipi>;
-				};
-			};
-
-			mipi_out: port@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	mipi_dsi1: dsi@ff968000 {
-		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
-		reg = <0x0 0xff968000 0x0 0x8000>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
-			 <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
-		clock-names = "ref", "pclk", "phy_cfg", "grf";
-		power-domains = <&power RK3399_PD_VIO>;
-		resets = <&cru SRST_P_MIPI_DSI1>;
-		reset-names = "apb";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#phy-cells = <0>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mipi1_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi1_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_mipi1>;
-				};
-
-				mipi1_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_mipi1>;
-				};
-			};
-
-			mipi1_out: port@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	edp: dp@ff970000 {
-		compatible = "rockchip,rk3399-edp";
-		reg = <0x0 0xff970000 0x0 0x8000>;
-		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
-		clock-names = "dp", "pclk", "grf";
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_hpd>;
-		power-domains = <&power RK3399_PD_EDP>;
-		resets = <&cru SRST_P_EDP_CTRL>;
-		reset-names = "dp";
-		rockchip,grf = <&grf>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				edp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_edp>;
-				};
-
-				edp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_edp>;
-				};
-			};
-
-			edp_out: port@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	gpu: gpu@ff9a0000 {
-		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
-		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "job", "mmu", "gpu";
-		clocks = <&cru ACLK_GPU>;
-		#cooling-cells = <2>;
-		dynamic-power-coefficient = <2640>;
-		power-domains = <&power RK3399_PD_GPU>;
-		status = "disabled";
-	};
-
-	pinctrl: pinctrl {
-		compatible = "rockchip,rk3399-pinctrl";
-		rockchip,grf = <&grf>;
-		rockchip,pmu = <&pmugrf>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		gpio0: gpio@ff720000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x0 0xff720000 0x0 0x100>;
-			clocks = <&pmucru PCLK_GPIO0_PMU>;
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
-
-			gpio-controller;
-			#gpio-cells = <0x2>;
-
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-
-		gpio1: gpio@ff730000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x0 0xff730000 0x0 0x100>;
-			clocks = <&pmucru PCLK_GPIO1_PMU>;
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
-
-			gpio-controller;
-			#gpio-cells = <0x2>;
-
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-
-		gpio2: gpio@ff780000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x0 0xff780000 0x0 0x100>;
-			clocks = <&cru PCLK_GPIO2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
-
-			gpio-controller;
-			#gpio-cells = <0x2>;
-
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-
-		gpio3: gpio@ff788000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x0 0xff788000 0x0 0x100>;
-			clocks = <&cru PCLK_GPIO3>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
-
-			gpio-controller;
-			#gpio-cells = <0x2>;
-
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-
-		gpio4: gpio@ff790000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x0 0xff790000 0x0 0x100>;
-			clocks = <&cru PCLK_GPIO4>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
-
-			gpio-controller;
-			#gpio-cells = <0x2>;
-
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-
-		pcfg_pull_up: pcfg-pull-up {
-			bias-pull-up;
-		};
-
-		pcfg_pull_down: pcfg-pull-down {
-			bias-pull-down;
-		};
-
-		pcfg_pull_none: pcfg-pull-none {
-			bias-disable;
-		};
-
-		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
-			bias-disable;
-			drive-strength = <12>;
-		};
-
-		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
-			bias-disable;
-			drive-strength = <13>;
-		};
-
-		pcfg_pull_none_18ma: pcfg-pull-none-18ma {
-			bias-disable;
-			drive-strength = <18>;
-		};
-
-		pcfg_pull_none_20ma: pcfg-pull-none-20ma {
-			bias-disable;
-			drive-strength = <20>;
-		};
-
-		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
-			bias-pull-up;
-			drive-strength = <8>;
-		};
-
-		pcfg_pull_up_18ma: pcfg-pull-up-18ma {
-			bias-pull-up;
-			drive-strength = <18>;
-		};
-
-		pcfg_pull_up_20ma: pcfg-pull-up-20ma {
-			bias-pull-up;
-			drive-strength = <20>;
-		};
-
-		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
-			bias-pull-down;
-			drive-strength = <4>;
-		};
-
-		pcfg_pull_down_8ma: pcfg-pull-down-8ma {
-			bias-pull-down;
-			drive-strength = <8>;
-		};
-
-		pcfg_pull_down_12ma: pcfg-pull-down-12ma {
-			bias-pull-down;
-			drive-strength = <12>;
-		};
-
-		pcfg_pull_down_18ma: pcfg-pull-down-18ma {
-			bias-pull-down;
-			drive-strength = <18>;
-		};
-
-		pcfg_pull_down_20ma: pcfg-pull-down-20ma {
-			bias-pull-down;
-			drive-strength = <20>;
-		};
-
-		pcfg_output_high: pcfg-output-high {
-			output-high;
-		};
-
-		pcfg_output_low: pcfg-output-low {
-			output-low;
-		};
-
-		pcfg_input_enable: pcfg-input-enable {
-			input-enable;
-		};
-
-		pcfg_input_pull_up: pcfg-input-pull-up {
-			input-enable;
-			bias-pull-up;
-		};
-
-		pcfg_input_pull_down: pcfg-input-pull-down {
-			input-enable;
-			bias-pull-down;
-		};
-
-		clock {
-			clk_32k: clk-32k {
-				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
-			};
-		};
-
-		cif {
-			cif_clkin: cif-clkin {
-				rockchip,pins =
-					<2 RK_PB2 3 &pcfg_pull_none>;
-			};
-
-			cif_clkouta: cif-clkouta {
-				rockchip,pins =
-					<2 RK_PB3 3 &pcfg_pull_none>;
-			};
-		};
-
-		edp {
-			edp_hpd: edp-hpd {
-				rockchip,pins =
-					<4 RK_PC7 2 &pcfg_pull_none>;
-			};
-		};
-
-		gmac {
-			rgmii_pins: rgmii-pins {
-				rockchip,pins =
-					/* mac_txclk */
-					<3 RK_PC1 1 &pcfg_pull_none_13ma>,
-					/* mac_rxclk */
-					<3 RK_PB6 1 &pcfg_pull_none>,
-					/* mac_mdio */
-					<3 RK_PB5 1 &pcfg_pull_none>,
-					/* mac_txen */
-					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
-					/* mac_clk */
-					<3 RK_PB3 1 &pcfg_pull_none>,
-					/* mac_rxdv */
-					<3 RK_PB1 1 &pcfg_pull_none>,
-					/* mac_mdc */
-					<3 RK_PB0 1 &pcfg_pull_none>,
-					/* mac_rxd1 */
-					<3 RK_PA7 1 &pcfg_pull_none>,
-					/* mac_rxd0 */
-					<3 RK_PA6 1 &pcfg_pull_none>,
-					/* mac_txd1 */
-					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
-					/* mac_txd0 */
-					<3 RK_PA4 1 &pcfg_pull_none_13ma>,
-					/* mac_rxd3 */
-					<3 RK_PA3 1 &pcfg_pull_none>,
-					/* mac_rxd2 */
-					<3 RK_PA2 1 &pcfg_pull_none>,
-					/* mac_txd3 */
-					<3 RK_PA1 1 &pcfg_pull_none_13ma>,
-					/* mac_txd2 */
-					<3 RK_PA0 1 &pcfg_pull_none_13ma>;
-			};
-
-			rmii_pins: rmii-pins {
-				rockchip,pins =
-					/* mac_mdio */
-					<3 RK_PB5 1 &pcfg_pull_none>,
-					/* mac_txen */
-					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
-					/* mac_clk */
-					<3 RK_PB3 1 &pcfg_pull_none>,
-					/* mac_rxer */
-					<3 RK_PB2 1 &pcfg_pull_none>,
-					/* mac_rxdv */
-					<3 RK_PB1 1 &pcfg_pull_none>,
-					/* mac_mdc */
-					<3 RK_PB0 1 &pcfg_pull_none>,
-					/* mac_rxd1 */
-					<3 RK_PA7 1 &pcfg_pull_none>,
-					/* mac_rxd0 */
-					<3 RK_PA6 1 &pcfg_pull_none>,
-					/* mac_txd1 */
-					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
-					/* mac_txd0 */
-					<3 RK_PA4 1 &pcfg_pull_none_13ma>;
-			};
-		};
-
-		i2c0 {
-			i2c0_xfer: i2c0-xfer {
-				rockchip,pins =
-					<1 RK_PB7 2 &pcfg_pull_none>,
-					<1 RK_PC0 2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c1 {
-			i2c1_xfer: i2c1-xfer {
-				rockchip,pins =
-					<4 RK_PA2 1 &pcfg_pull_none>,
-					<4 RK_PA1 1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c2 {
-			i2c2_xfer: i2c2-xfer {
-				rockchip,pins =
-					<2 RK_PA1 2 &pcfg_pull_none_12ma>,
-					<2 RK_PA0 2 &pcfg_pull_none_12ma>;
-			};
-		};
-
-		i2c3 {
-			i2c3_xfer: i2c3-xfer {
-				rockchip,pins =
-					<4 RK_PC1 1 &pcfg_pull_none>,
-					<4 RK_PC0 1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c4 {
-			i2c4_xfer: i2c4-xfer {
-				rockchip,pins =
-					<1 RK_PB4 1 &pcfg_pull_none>,
-					<1 RK_PB3 1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c5 {
-			i2c5_xfer: i2c5-xfer {
-				rockchip,pins =
-					<3 RK_PB3 2 &pcfg_pull_none>,
-					<3 RK_PB2 2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c6 {
-			i2c6_xfer: i2c6-xfer {
-				rockchip,pins =
-					<2 RK_PB2 2 &pcfg_pull_none>,
-					<2 RK_PB1 2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c7 {
-			i2c7_xfer: i2c7-xfer {
-				rockchip,pins =
-					<2 RK_PB0 2 &pcfg_pull_none>,
-					<2 RK_PA7 2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c8 {
-			i2c8_xfer: i2c8-xfer {
-				rockchip,pins =
-					<1 RK_PC5 1 &pcfg_pull_none>,
-					<1 RK_PC4 1 &pcfg_pull_none>;
-			};
-		};
-
-		i2s0 {
-			i2s0_2ch_bus: i2s0-2ch-bus {
-				rockchip,pins =
-					<3 RK_PD0 1 &pcfg_pull_none>,
-					<3 RK_PD1 1 &pcfg_pull_none>,
-					<3 RK_PD2 1 &pcfg_pull_none>,
-					<3 RK_PD3 1 &pcfg_pull_none>,
-					<3 RK_PD7 1 &pcfg_pull_none>,
-					<4 RK_PA0 1 &pcfg_pull_none>;
-			};
-
-			i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off {
-				rockchip,pins =
-					<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
-					<3 RK_PD1 1 &pcfg_pull_none>,
-					<3 RK_PD2 1 &pcfg_pull_none>,
-					<3 RK_PD3 1 &pcfg_pull_none>,
-					<3 RK_PD7 1 &pcfg_pull_none>,
-					<4 RK_PA0 1 &pcfg_pull_none>;
-			};
-
-			i2s0_8ch_bus: i2s0-8ch-bus {
-				rockchip,pins =
-					<3 RK_PD0 1 &pcfg_pull_none>,
-					<3 RK_PD1 1 &pcfg_pull_none>,
-					<3 RK_PD2 1 &pcfg_pull_none>,
-					<3 RK_PD3 1 &pcfg_pull_none>,
-					<3 RK_PD4 1 &pcfg_pull_none>,
-					<3 RK_PD5 1 &pcfg_pull_none>,
-					<3 RK_PD6 1 &pcfg_pull_none>,
-					<3 RK_PD7 1 &pcfg_pull_none>,
-					<4 RK_PA0 1 &pcfg_pull_none>;
-			};
-
-			i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off {
-				rockchip,pins =
-					<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
-					<3 RK_PD1 1 &pcfg_pull_none>,
-					<3 RK_PD2 1 &pcfg_pull_none>,
-					<3 RK_PD3 1 &pcfg_pull_none>,
-					<3 RK_PD4 1 &pcfg_pull_none>,
-					<3 RK_PD5 1 &pcfg_pull_none>,
-					<3 RK_PD6 1 &pcfg_pull_none>,
-					<3 RK_PD7 1 &pcfg_pull_none>,
-					<4 RK_PA0 1 &pcfg_pull_none>;
-			};
-		};
-
-		i2s1 {
-			i2s1_2ch_bus: i2s1-2ch-bus {
-				rockchip,pins =
-					<4 RK_PA3 1 &pcfg_pull_none>,
-					<4 RK_PA4 1 &pcfg_pull_none>,
-					<4 RK_PA5 1 &pcfg_pull_none>,
-					<4 RK_PA6 1 &pcfg_pull_none>,
-					<4 RK_PA7 1 &pcfg_pull_none>;
-			};
-
-			i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off {
-				rockchip,pins =
-					<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
-					<4 RK_PA4 1 &pcfg_pull_none>,
-					<4 RK_PA5 1 &pcfg_pull_none>,
-					<4 RK_PA6 1 &pcfg_pull_none>,
-					<4 RK_PA7 1 &pcfg_pull_none>;
-			};
-		};
-
-		sdio0 {
-			sdio0_bus1: sdio0-bus1 {
-				rockchip,pins =
-					<2 RK_PC4 1 &pcfg_pull_up>;
-			};
-
-			sdio0_bus4: sdio0-bus4 {
-				rockchip,pins =
-					<2 RK_PC4 1 &pcfg_pull_up>,
-					<2 RK_PC5 1 &pcfg_pull_up>,
-					<2 RK_PC6 1 &pcfg_pull_up>,
-					<2 RK_PC7 1 &pcfg_pull_up>;
-			};
-
-			sdio0_cmd: sdio0-cmd {
-				rockchip,pins =
-					<2 RK_PD0 1 &pcfg_pull_up>;
-			};
-
-			sdio0_clk: sdio0-clk {
-				rockchip,pins =
-					<2 RK_PD1 1 &pcfg_pull_none>;
-			};
-
-			sdio0_cd: sdio0-cd {
-				rockchip,pins =
-					<2 RK_PD2 1 &pcfg_pull_up>;
-			};
-
-			sdio0_pwr: sdio0-pwr {
-				rockchip,pins =
-					<2 RK_PD3 1 &pcfg_pull_up>;
-			};
-
-			sdio0_bkpwr: sdio0-bkpwr {
-				rockchip,pins =
-					<2 RK_PD4 1 &pcfg_pull_up>;
-			};
-
-			sdio0_wp: sdio0-wp {
-				rockchip,pins =
-					<0 RK_PA3 1 &pcfg_pull_up>;
-			};
-
-			sdio0_int: sdio0-int {
-				rockchip,pins =
-					<0 RK_PA4 1 &pcfg_pull_up>;
-			};
-		};
-
-		sdmmc {
-			sdmmc_bus1: sdmmc-bus1 {
-				rockchip,pins =
-					<4 RK_PB0 1 &pcfg_pull_up>;
-			};
-
-			sdmmc_bus4: sdmmc-bus4 {
-				rockchip,pins =
-					<4 RK_PB0 1 &pcfg_pull_up>,
-					<4 RK_PB1 1 &pcfg_pull_up>,
-					<4 RK_PB2 1 &pcfg_pull_up>,
-					<4 RK_PB3 1 &pcfg_pull_up>;
-			};
-
-			sdmmc_clk: sdmmc-clk {
-				rockchip,pins =
-					<4 RK_PB4 1 &pcfg_pull_none>;
-			};
-
-			sdmmc_cmd: sdmmc-cmd {
-				rockchip,pins =
-					<4 RK_PB5 1 &pcfg_pull_up>;
-			};
-
-			sdmmc_cd: sdmmc-cd {
-				rockchip,pins =
-					<0 RK_PA7 1 &pcfg_pull_up>;
-			};
-
-			sdmmc_wp: sdmmc-wp {
-				rockchip,pins =
-					<0 RK_PB0 1 &pcfg_pull_up>;
-			};
-		};
-
-		suspend {
-			ap_pwroff: ap-pwroff {
-				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
-			};
-
-			ddrio_pwroff: ddrio-pwroff {
-				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
-			};
-		};
-
-		spdif {
-			spdif_bus: spdif-bus {
-				rockchip,pins =
-					<4 RK_PC5 1 &pcfg_pull_none>;
-			};
-
-			spdif_bus_1: spdif-bus-1 {
-				rockchip,pins =
-					<3 RK_PC0 3 &pcfg_pull_none>;
-			};
-		};
-
-		spi0 {
-			spi0_clk: spi0-clk {
-				rockchip,pins =
-					<3 RK_PA6 2 &pcfg_pull_up>;
-			};
-			spi0_cs0: spi0-cs0 {
-				rockchip,pins =
-					<3 RK_PA7 2 &pcfg_pull_up>;
-			};
-			spi0_cs1: spi0-cs1 {
-				rockchip,pins =
-					<3 RK_PB0 2 &pcfg_pull_up>;
-			};
-			spi0_tx: spi0-tx {
-				rockchip,pins =
-					<3 RK_PA5 2 &pcfg_pull_up>;
-			};
-			spi0_rx: spi0-rx {
-				rockchip,pins =
-					<3 RK_PA4 2 &pcfg_pull_up>;
-			};
-		};
-
-		spi1 {
-			spi1_clk: spi1-clk {
-				rockchip,pins =
-					<1 RK_PB1 2 &pcfg_pull_up>;
-			};
-			spi1_cs0: spi1-cs0 {
-				rockchip,pins =
-					<1 RK_PB2 2 &pcfg_pull_up>;
-			};
-			spi1_rx: spi1-rx {
-				rockchip,pins =
-					<1 RK_PA7 2 &pcfg_pull_up>;
-			};
-			spi1_tx: spi1-tx {
-				rockchip,pins =
-					<1 RK_PB0 2 &pcfg_pull_up>;
-			};
-		};
-
-		spi2 {
-			spi2_clk: spi2-clk {
-				rockchip,pins =
-					<2 RK_PB3 1 &pcfg_pull_up>;
-			};
-			spi2_cs0: spi2-cs0 {
-				rockchip,pins =
-					<2 RK_PB4 1 &pcfg_pull_up>;
-			};
-			spi2_rx: spi2-rx {
-				rockchip,pins =
-					<2 RK_PB1 1 &pcfg_pull_up>;
-			};
-			spi2_tx: spi2-tx {
-				rockchip,pins =
-					<2 RK_PB2 1 &pcfg_pull_up>;
-			};
-		};
-
-		spi3 {
-			spi3_clk: spi3-clk {
-				rockchip,pins =
-					<1 RK_PC1 1 &pcfg_pull_up>;
-			};
-			spi3_cs0: spi3-cs0 {
-				rockchip,pins =
-					<1 RK_PC2 1 &pcfg_pull_up>;
-			};
-			spi3_rx: spi3-rx {
-				rockchip,pins =
-					<1 RK_PB7 1 &pcfg_pull_up>;
-			};
-			spi3_tx: spi3-tx {
-				rockchip,pins =
-					<1 RK_PC0 1 &pcfg_pull_up>;
-			};
-		};
-
-		spi4 {
-			spi4_clk: spi4-clk {
-				rockchip,pins =
-					<3 RK_PA2 2 &pcfg_pull_up>;
-			};
-			spi4_cs0: spi4-cs0 {
-				rockchip,pins =
-					<3 RK_PA3 2 &pcfg_pull_up>;
-			};
-			spi4_rx: spi4-rx {
-				rockchip,pins =
-					<3 RK_PA0 2 &pcfg_pull_up>;
-			};
-			spi4_tx: spi4-tx {
-				rockchip,pins =
-					<3 RK_PA1 2 &pcfg_pull_up>;
-			};
-		};
-
-		spi5 {
-			spi5_clk: spi5-clk {
-				rockchip,pins =
-					<2 RK_PC6 2 &pcfg_pull_up>;
-			};
-			spi5_cs0: spi5-cs0 {
-				rockchip,pins =
-					<2 RK_PC7 2 &pcfg_pull_up>;
-			};
-			spi5_rx: spi5-rx {
-				rockchip,pins =
-					<2 RK_PC4 2 &pcfg_pull_up>;
-			};
-			spi5_tx: spi5-tx {
-				rockchip,pins =
-					<2 RK_PC5 2 &pcfg_pull_up>;
-			};
-		};
-
-		testclk {
-			test_clkout0: test-clkout0 {
-				rockchip,pins =
-					<0 RK_PA0 1 &pcfg_pull_none>;
-			};
-
-			test_clkout1: test-clkout1 {
-				rockchip,pins =
-					<2 RK_PD1 2 &pcfg_pull_none>;
-			};
-
-			test_clkout2: test-clkout2 {
-				rockchip,pins =
-					<0 RK_PB0 3 &pcfg_pull_none>;
-			};
-		};
-
-		tsadc {
-			otp_pin: otp-pin {
-				rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-			};
-
-			otp_out: otp-out {
-				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
-			};
-		};
-
-		uart0 {
-			uart0_xfer: uart0-xfer {
-				rockchip,pins =
-					<2 RK_PC0 1 &pcfg_pull_up>,
-					<2 RK_PC1 1 &pcfg_pull_none>;
-			};
-
-			uart0_cts: uart0-cts {
-				rockchip,pins =
-					<2 RK_PC2 1 &pcfg_pull_none>;
-			};
-
-			uart0_rts: uart0-rts {
-				rockchip,pins =
-					<2 RK_PC3 1 &pcfg_pull_none>;
-			};
-		};
-
-		uart1 {
-			uart1_xfer: uart1-xfer {
-				rockchip,pins =
-					<3 RK_PB4 2 &pcfg_pull_up>,
-					<3 RK_PB5 2 &pcfg_pull_none>;
-			};
-		};
-
-		uart2a {
-			uart2a_xfer: uart2a-xfer {
-				rockchip,pins =
-					<4 RK_PB0 2 &pcfg_pull_up>,
-					<4 RK_PB1 2 &pcfg_pull_none>;
-			};
-		};
-
-		uart2b {
-			uart2b_xfer: uart2b-xfer {
-				rockchip,pins =
-					<4 RK_PC0 2 &pcfg_pull_up>,
-					<4 RK_PC1 2 &pcfg_pull_none>;
-			};
-		};
-
-		uart2c {
-			uart2c_xfer: uart2c-xfer {
-				rockchip,pins =
-					<4 RK_PC3 1 &pcfg_pull_up>,
-					<4 RK_PC4 1 &pcfg_pull_none>;
-			};
-		};
-
-		uart3 {
-			uart3_xfer: uart3-xfer {
-				rockchip,pins =
-					<3 RK_PB6 2 &pcfg_pull_up>,
-					<3 RK_PB7 2 &pcfg_pull_none>;
-			};
-
-			uart3_cts: uart3-cts {
-				rockchip,pins =
-					<3 RK_PC0 2 &pcfg_pull_none>;
-			};
-
-			uart3_rts: uart3-rts {
-				rockchip,pins =
-					<3 RK_PC1 2 &pcfg_pull_none>;
-			};
-		};
-
-		uart4 {
-			uart4_xfer: uart4-xfer {
-				rockchip,pins =
-					<1 RK_PA7 1 &pcfg_pull_up>,
-					<1 RK_PB0 1 &pcfg_pull_none>;
-			};
-		};
-
-		uarthdcp {
-			uarthdcp_xfer: uarthdcp-xfer {
-				rockchip,pins =
-					<4 RK_PC5 2 &pcfg_pull_up>,
-					<4 RK_PC6 2 &pcfg_pull_none>;
-			};
-		};
-
-		pwm0 {
-			pwm0_pin: pwm0-pin {
-				rockchip,pins =
-					<4 RK_PC2 1 &pcfg_pull_none>;
-			};
-
-			pwm0_pin_pull_down: pwm0-pin-pull-down {
-				rockchip,pins =
-					<4 RK_PC2 1 &pcfg_pull_down>;
-			};
-
-			vop0_pwm_pin: vop0-pwm-pin {
-				rockchip,pins =
-					<4 RK_PC2 2 &pcfg_pull_none>;
-			};
-
-			vop1_pwm_pin: vop1-pwm-pin {
-				rockchip,pins =
-					<4 RK_PC2 3 &pcfg_pull_none>;
-			};
-		};
-
-		pwm1 {
-			pwm1_pin: pwm1-pin {
-				rockchip,pins =
-					<4 RK_PC6 1 &pcfg_pull_none>;
-			};
-
-			pwm1_pin_pull_down: pwm1-pin-pull-down {
-				rockchip,pins =
-					<4 RK_PC6 1 &pcfg_pull_down>;
-			};
-		};
-
-		pwm2 {
-			pwm2_pin: pwm2-pin {
-				rockchip,pins =
-					<1 RK_PC3 1 &pcfg_pull_none>;
-			};
-
-			pwm2_pin_pull_down: pwm2-pin-pull-down {
-				rockchip,pins =
-					<1 RK_PC3 1 &pcfg_pull_down>;
-			};
-		};
-
-		pwm3a {
-			pwm3a_pin: pwm3a-pin {
-				rockchip,pins =
-					<0 RK_PA6 1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm3b {
-			pwm3b_pin: pwm3b-pin {
-				rockchip,pins =
-					<1 RK_PB6 1 &pcfg_pull_none>;
-			};
-		};
-
-		hdmi {
-			hdmi_i2c_xfer: hdmi-i2c-xfer {
-				rockchip,pins =
-					<4 RK_PC1 3 &pcfg_pull_none>,
-					<4 RK_PC0 3 &pcfg_pull_none>;
-			};
-
-			hdmi_cec: hdmi-cec {
-				rockchip,pins =
-					<4 RK_PC7 1 &pcfg_pull_none>;
-			};
-		};
-
-		pcie {
-			pcie_clkreqn_cpm: pci-clkreqn-cpm {
-				rockchip,pins =
-					<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-			};
-
-			pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
-				rockchip,pins =
-					<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/dts/rk3399pro-rock-pi-n10.dts b/arch/arm/dts/rk3399pro-rock-pi-n10.dts
deleted file mode 100644
index bf026786fa92..000000000000
--- a/arch/arm/dts/rk3399pro-rock-pi-n10.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-#include <rockchip-radxa-dalang-carrier.dtsi>
-#include "rk3399pro-vmarc-som.dtsi"
-
-/ {
-	model = "Radxa ROCK Pi N10";
-	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
-		     "rockchip,rk3399pro";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-};
diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
deleted file mode 100644
index 8823c924dc1d..000000000000
--- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi
+++ /dev/null
@@ -1,477 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Vamrs Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
-
-	aliases {
-		ethernet0 = &gmac;
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc;
-	};
-
-	vcc3v3_pcie: vcc-pcie-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pwr>;
-		regulator-name = "vcc3v3_pcie";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	phy-supply = <&vcc_lan>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <30>;
-	i2c-scl-rising-time-ns = <180>;
-	status = "okay";
-
-	rk809: pmic@20 {
-		compatible = "rockchip,rk809";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "rk808-clkout1", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc_buck5>;
-		vcc6-supply = <&vcc_buck5>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-
-		regulators {
-			vdd_log: DCDC_REG1 {
-				regulator-name = "vdd_log";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-initial-mode = <0x2>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-initial-mode = <0x2>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-initial-mode = <0x2>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc3v3_sys: DCDC_REG4 {
-				regulator-name = "vcc3v3_sys";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-initial-mode = <0x2>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_buck5: DCDC_REG5 {
-				regulator-name = "vcc_buck5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2200000>;
-				};
-			};
-
-			vcca_0v9: LDO_REG1 {
-				regulator-name = "vcca_0v9";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_0v9: LDO_REG3 {
-				regulator-name = "vcc_0v9";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vcca_1v8: LDO_REG4 {
-				regulator-name = "vcca_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1850000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1850000>;
-				};
-			};
-
-			/*
-			 * As per BSP, but schematic not showing any regulator
-			 * pin for LD05.
-			 */
-			vdd1v5_dvp: LDO_REG5 {
-				regulator-name = "vdd1v5_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_3v0: LDO_REG7 {
-				regulator-name = "vccio_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd: LDO_REG8 {
-				regulator-name = "vccio_sd";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			/*
-			 * As per BSP, but schematic not showing any regulator
-			 * pin for LD09.
-			 */
-			vcc_sd: LDO_REG9 {
-				regulator-name = "vcc_sd";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc5v0_usb2: SWITCH_REG1 {
-				regulator-name = "vcc5v0_usb2";
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <5000000>;
-				};
-			};
-
-			vccio_3v3: vcc_lan: SWITCH_REG2 {
-				regulator-name = "vccio_3v3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-falling-time-ns = <30>;
-	i2c-scl-rising-time-ns = <140>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-	bt656-supply = <&vcca_1v8>;
-	gpio1830-supply = <&vccio_3v0>;
-	sdmmc-supply = <&vccio_sd>;
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-0 = <&pcie_clkreqnb_cpm>;
-	pinctrl-names = "default";
-	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
-	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
-	vpcie3v3-supply = <&vcc3v3_pcie>;
-	status = "okay";
-};
-
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
-		};
-	};
-
-	pcie {
-		pcie_pwr: pcie-pwr {
-			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	vbus_host {
-		usb1_en_oc: usb1-en-oc {
-			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	vbus_typec {
-		usb0_en_oc: usb0-en-oc {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&pmu_io_domains {
-	status = "okay";
-	pmu1830-supply = <&vcc_1v8>;
-};
-
-&sdio_pwrseq {
-	/*
-	 * On the module itself this is one of these (depending
-	 * on the actual card populated):
-	 * - SDIO_RESET_L_WL_REG_ON
-	 * - PDN (power down when low)
-	 */
-	reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&sdmmc {
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	max-frequency = <150000000>;
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>;
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		phy-supply = <&vbus_typec>;
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vbus_host>;
-		status = "okay";
-	};
-};
-
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_host: host-port {
-		phy-supply = <&vbus_host>;
-		status = "okay";
-	};
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-};
-
-&vbus_host {
-	enable-active-high;
-	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_en_oc>;
-};
-
-&vbus_typec {
-	enable-active-high;
-	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_en_oc>;
-};
diff --git a/arch/arm/dts/rk3399pro.dtsi b/arch/arm/dts/rk3399pro.dtsi
deleted file mode 100644
index bb5ebf6608b9..000000000000
--- a/arch/arm/dts/rk3399pro.dtsi
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
-
-#include "rk3399.dtsi"
-
-/ {
-	compatible = "rockchip,rk3399pro";
-};
-
-/* Default to enabled since AP talk to NPU part over pcie */
-&pcie_phy {
-	status = "okay";
-};
-
-/* Default to enabled since AP talk to NPU part over pcie */
-&pcie0 {
-	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>;
-	status = "okay";
-};
diff --git a/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt
deleted file mode 100644
index 4a56f78f555b..000000000000
--- a/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Rockchip Dynamic Memory Controller Driver
-Required properties:
-- compatible: "rockchip,rk3399-dmc", "syscon"
-- rockchip,cru: this driver should access cru regs, so need get cru here
-- rockchip,pmucru: this driver should access pmucru regs, so need get pmucru here
-- rockchip,pmugrf: this driver should access pmugrf regs, so need get pmugrf here
-- rockchip,pmusgrf: this driver should access pmusgrf regs, so need get pmusgrf here
-- rockchip,cic: this driver should access cic regs, so need get cic here
-- reg: dynamic ram protocol controller(PCTL) address, PHY Independent(PI) address, phy controller(PHYCTL) address and memory schedule(MSCH) address
-- clock: must include clock specifiers corresponding to entries in the clock-names property.
-    Must contain
-      dmc_clk: for ddr working frequency
-- rockchip,sdram-params: SDRAM parameters, including all the information by ddr driver:
-    Must contain
-      Genarate by vendor tool and adjust for U-Boot dtsi.
-
-Example:
-	dmc: dmc {
-		bootph-all;
-		compatible = "rockchip,rk3399-dmc";
-		devfreq-events = <&dfi>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_DDRCLK>;
-		clock-names = "dmc_clk";
-		reg = <0x0 0xffa80000 0x0 0x0800
-		       0x0 0xffa80800 0x0 0x1800
-		       0x0 0xffa82000 0x0 0x2000
-		       0x0 0xffa84000 0x0 0x1000
-		       0x0 0xffa88000 0x0 0x0800
-		       0x0 0xffa88800 0x0 0x1800
-		       0x0 0xffa8a000 0x0 0x2000
-		       0x0 0xffa8c000 0x0 0x1000>;
-	};
-
-	&dmc {
-		rockchip,sdram-params = <
-		0x2
-		0xa
-		0x3
-		...
-		>;
-	};
diff --git a/include/dt-bindings/clock/rk3399-cru.h b/include/dt-bindings/clock/rk3399-cru.h
deleted file mode 100644
index 39169d94a44e..000000000000
--- a/include/dt-bindings/clock/rk3399-cru.h
+++ /dev/null
@@ -1,751 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
- * Author: Xing Zheng <zhengxing@rock-chips.com>
- */
-
-#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H
-#define _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H
-
-/* core clocks */
-#define PLL_APLLL			1
-#define PLL_APLLB			2
-#define PLL_DPLL			3
-#define PLL_CPLL			4
-#define PLL_GPLL			5
-#define PLL_NPLL			6
-#define PLL_VPLL			7
-#define ARMCLKL				8
-#define ARMCLKB				9
-
-/* sclk gates (special clocks) */
-#define SCLK_I2C1			65
-#define SCLK_I2C2			66
-#define SCLK_I2C3			67
-#define SCLK_I2C5			68
-#define SCLK_I2C6			69
-#define SCLK_I2C7			70
-#define SCLK_SPI0			71
-#define SCLK_SPI1			72
-#define SCLK_SPI2			73
-#define SCLK_SPI4			74
-#define SCLK_SPI5			75
-#define SCLK_SDMMC			76
-#define SCLK_SDIO			77
-#define SCLK_EMMC			78
-#define SCLK_TSADC			79
-#define SCLK_SARADC			80
-#define SCLK_UART0			81
-#define SCLK_UART1			82
-#define SCLK_UART2			83
-#define SCLK_UART3			84
-#define SCLK_SPDIF_8CH			85
-#define SCLK_I2S0_8CH			86
-#define SCLK_I2S1_8CH			87
-#define SCLK_I2S2_8CH			88
-#define SCLK_I2S_8CH_OUT		89
-#define SCLK_TIMER00			90
-#define SCLK_TIMER01			91
-#define SCLK_TIMER02			92
-#define SCLK_TIMER03			93
-#define SCLK_TIMER04			94
-#define SCLK_TIMER05			95
-#define SCLK_TIMER06			96
-#define SCLK_TIMER07			97
-#define SCLK_TIMER08			98
-#define SCLK_TIMER09			99
-#define SCLK_TIMER10			100
-#define SCLK_TIMER11			101
-#define SCLK_MACREF			102
-#define SCLK_MAC_RX			103
-#define SCLK_MAC_TX			104
-#define SCLK_MAC			105
-#define SCLK_MACREF_OUT			106
-#define SCLK_VOP0_PWM			107
-#define SCLK_VOP1_PWM			108
-#define SCLK_RGA_CORE			109
-#define SCLK_ISP0			110
-#define SCLK_ISP1			111
-#define SCLK_HDMI_CEC			112
-#define SCLK_HDMI_SFR			113
-#define SCLK_DP_CORE			114
-#define SCLK_PVTM_CORE_L		115
-#define SCLK_PVTM_CORE_B		116
-#define SCLK_PVTM_GPU			117
-#define SCLK_PVTM_DDR			118
-#define SCLK_MIPIDPHY_REF		119
-#define SCLK_MIPIDPHY_CFG		120
-#define SCLK_HSICPHY			121
-#define SCLK_USBPHY480M			122
-#define SCLK_USB2PHY0_REF		123
-#define SCLK_USB2PHY1_REF		124
-#define SCLK_UPHY0_TCPDPHY_REF		125
-#define SCLK_UPHY0_TCPDCORE		126
-#define SCLK_UPHY1_TCPDPHY_REF		127
-#define SCLK_UPHY1_TCPDCORE		128
-#define SCLK_USB3OTG0_REF		129
-#define SCLK_USB3OTG1_REF		130
-#define SCLK_USB3OTG0_SUSPEND		131
-#define SCLK_USB3OTG1_SUSPEND		132
-#define SCLK_CRYPTO0			133
-#define SCLK_CRYPTO1			134
-#define SCLK_CCI_TRACE			135
-#define SCLK_CS				136
-#define SCLK_CIF_OUT			137
-#define SCLK_PCIEPHY_REF		138
-#define SCLK_PCIE_CORE			139
-#define SCLK_M0_PERILP			140
-#define SCLK_M0_PERILP_DEC		141
-#define SCLK_CM0S			142
-#define SCLK_DBG_NOC			143
-#define SCLK_DBG_PD_CORE_B		144
-#define SCLK_DBG_PD_CORE_L		145
-#define SCLK_DFIMON0_TIMER		146
-#define SCLK_DFIMON1_TIMER		147
-#define SCLK_INTMEM0			148
-#define SCLK_INTMEM1			149
-#define SCLK_INTMEM2			150
-#define SCLK_INTMEM3			151
-#define SCLK_INTMEM4			152
-#define SCLK_INTMEM5			153
-#define SCLK_SDMMC_DRV			154
-#define SCLK_SDMMC_SAMPLE		155
-#define SCLK_SDIO_DRV			156
-#define SCLK_SDIO_SAMPLE		157
-#define SCLK_VDU_CORE			158
-#define SCLK_VDU_CA			159
-#define SCLK_PCIE_PM			160
-#define SCLK_SPDIF_REC_DPTX		161
-#define SCLK_DPHY_PLL			162
-#define SCLK_DPHY_TX0_CFG		163
-#define SCLK_DPHY_TX1RX1_CFG		164
-#define SCLK_DPHY_RX0_CFG		165
-#define SCLK_RMII_SRC			166
-#define SCLK_PCIEPHY_REF100M		167
-#define SCLK_DDRC			168
-#define SCLK_TESTCLKOUT1		169
-#define SCLK_TESTCLKOUT2		170
-
-#define DCLK_VOP0			180
-#define DCLK_VOP1			181
-#define DCLK_VOP0_DIV			182
-#define DCLK_VOP1_DIV			183
-#define DCLK_M0_PERILP			184
-#define DCLK_VOP0_FRAC			185
-#define DCLK_VOP1_FRAC			186
-
-#define FCLK_CM0S			190
-
-/* aclk gates */
-#define ACLK_PERIHP			192
-#define ACLK_PERIHP_NOC			193
-#define ACLK_PERILP0			194
-#define ACLK_PERILP0_NOC		195
-#define ACLK_PERF_PCIE			196
-#define ACLK_PCIE			197
-#define ACLK_INTMEM			198
-#define ACLK_TZMA			199
-#define ACLK_DCF			200
-#define ACLK_CCI			201
-#define ACLK_CCI_NOC0			202
-#define ACLK_CCI_NOC1			203
-#define ACLK_CCI_GRF			204
-#define ACLK_CENTER			205
-#define ACLK_CENTER_MAIN_NOC		206
-#define ACLK_CENTER_PERI_NOC		207
-#define ACLK_GPU			208
-#define ACLK_PERF_GPU			209
-#define ACLK_GPU_GRF			210
-#define ACLK_DMAC0_PERILP		211
-#define ACLK_DMAC1_PERILP		212
-#define ACLK_GMAC			213
-#define ACLK_GMAC_NOC			214
-#define ACLK_PERF_GMAC			215
-#define ACLK_VOP0_NOC			216
-#define ACLK_VOP0			217
-#define ACLK_VOP1_NOC			218
-#define ACLK_VOP1			219
-#define ACLK_RGA			220
-#define ACLK_RGA_NOC			221
-#define ACLK_HDCP			222
-#define ACLK_HDCP_NOC			223
-#define ACLK_HDCP22			224
-#define ACLK_IEP			225
-#define ACLK_IEP_NOC			226
-#define ACLK_VIO			227
-#define ACLK_VIO_NOC			228
-#define ACLK_ISP0			229
-#define ACLK_ISP1			230
-#define ACLK_ISP0_NOC			231
-#define ACLK_ISP1_NOC			232
-#define ACLK_ISP0_WRAPPER		233
-#define ACLK_ISP1_WRAPPER		234
-#define ACLK_VCODEC			235
-#define ACLK_VCODEC_NOC			236
-#define ACLK_VDU			237
-#define ACLK_VDU_NOC			238
-#define ACLK_PERI			239
-#define ACLK_EMMC			240
-#define ACLK_EMMC_CORE			241
-#define ACLK_EMMC_NOC			242
-#define ACLK_EMMC_GRF			243
-#define ACLK_USB3			244
-#define ACLK_USB3_NOC			245
-#define ACLK_USB3OTG0			246
-#define ACLK_USB3OTG1			247
-#define ACLK_USB3_RKSOC_AXI_PERF	248
-#define ACLK_USB3_GRF			249
-#define ACLK_GIC			250
-#define ACLK_GIC_NOC			251
-#define ACLK_GIC_ADB400_CORE_L_2_GIC	252
-#define ACLK_GIC_ADB400_CORE_B_2_GIC	253
-#define ACLK_GIC_ADB400_GIC_2_CORE_L	254
-#define ACLK_GIC_ADB400_GIC_2_CORE_B	255
-#define ACLK_CORE_ADB400_CORE_L_2_CCI500 256
-#define ACLK_CORE_ADB400_CORE_B_2_CCI500 257
-#define ACLK_ADB400M_PD_CORE_L		258
-#define ACLK_ADB400M_PD_CORE_B		259
-#define ACLK_PERF_CORE_L		260
-#define ACLK_PERF_CORE_B		261
-#define ACLK_GIC_PRE			262
-#define ACLK_VOP0_PRE			263
-#define ACLK_VOP1_PRE			264
-
-/* pclk gates */
-#define PCLK_PERIHP			320
-#define PCLK_PERIHP_NOC			321
-#define PCLK_PERILP0			322
-#define PCLK_PERILP1			323
-#define PCLK_PERILP1_NOC		324
-#define PCLK_PERILP_SGRF		325
-#define PCLK_PERIHP_GRF			326
-#define PCLK_PCIE			327
-#define PCLK_SGRF			328
-#define PCLK_INTR_ARB			329
-#define PCLK_CENTER_MAIN_NOC		330
-#define PCLK_CIC			331
-#define PCLK_COREDBG_B			332
-#define PCLK_COREDBG_L			333
-#define PCLK_DBG_CXCS_PD_CORE_B		334
-#define PCLK_DCF			335
-#define PCLK_GPIO2			336
-#define PCLK_GPIO3			337
-#define PCLK_GPIO4			338
-#define PCLK_GRF			339
-#define PCLK_HSICPHY			340
-#define PCLK_I2C1			341
-#define PCLK_I2C2			342
-#define PCLK_I2C3			343
-#define PCLK_I2C5			344
-#define PCLK_I2C6			345
-#define PCLK_I2C7			346
-#define PCLK_SPI0			347
-#define PCLK_SPI1			348
-#define PCLK_SPI2			349
-#define PCLK_SPI4			350
-#define PCLK_SPI5			351
-#define PCLK_UART0			352
-#define PCLK_UART1			353
-#define PCLK_UART2			354
-#define PCLK_UART3			355
-#define PCLK_TSADC			356
-#define PCLK_SARADC			357
-#define PCLK_GMAC			358
-#define PCLK_GMAC_NOC			359
-#define PCLK_TIMER0			360
-#define PCLK_TIMER1			361
-#define PCLK_EDP			362
-#define PCLK_EDP_NOC			363
-#define PCLK_EDP_CTRL			364
-#define PCLK_VIO			365
-#define PCLK_VIO_NOC			366
-#define PCLK_VIO_GRF			367
-#define PCLK_MIPI_DSI0			368
-#define PCLK_MIPI_DSI1			369
-#define PCLK_HDCP			370
-#define PCLK_HDCP_NOC			371
-#define PCLK_HDMI_CTRL			372
-#define PCLK_DP_CTRL			373
-#define PCLK_HDCP22			374
-#define PCLK_GASKET			375
-#define PCLK_DDR			376
-#define PCLK_DDR_MON			377
-#define PCLK_DDR_SGRF			378
-#define PCLK_ISP1_WRAPPER		379
-#define PCLK_WDT			380
-#define PCLK_EFUSE1024NS		381
-#define PCLK_EFUSE1024S			382
-#define PCLK_PMU_INTR_ARB		383
-#define PCLK_MAILBOX0			384
-#define PCLK_USBPHY_MUX_G		385
-#define PCLK_UPHY0_TCPHY_G		386
-#define PCLK_UPHY0_TCPD_G		387
-#define PCLK_UPHY1_TCPHY_G		388
-#define PCLK_UPHY1_TCPD_G		389
-#define PCLK_ALIVE			390
-
-/* hclk gates */
-#define HCLK_PERIHP			448
-#define HCLK_PERILP0			449
-#define HCLK_PERILP1			450
-#define HCLK_PERILP0_NOC		451
-#define HCLK_PERILP1_NOC		452
-#define HCLK_M0_PERILP			453
-#define HCLK_M0_PERILP_NOC		454
-#define HCLK_AHB1TOM			455
-#define HCLK_HOST0			456
-#define HCLK_HOST0_ARB			457
-#define HCLK_HOST1			458
-#define HCLK_HOST1_ARB			459
-#define HCLK_HSIC			460
-#define HCLK_SD				461
-#define HCLK_SDMMC			462
-#define HCLK_SDMMC_NOC			463
-#define HCLK_M_CRYPTO0			464
-#define HCLK_M_CRYPTO1			465
-#define HCLK_S_CRYPTO0			466
-#define HCLK_S_CRYPTO1			467
-#define HCLK_I2S0_8CH			468
-#define HCLK_I2S1_8CH			469
-#define HCLK_I2S2_8CH			470
-#define HCLK_SPDIF			471
-#define HCLK_VOP0_NOC			472
-#define HCLK_VOP0			473
-#define HCLK_VOP1_NOC			474
-#define HCLK_VOP1			475
-#define HCLK_ROM			476
-#define HCLK_IEP			477
-#define HCLK_IEP_NOC			478
-#define HCLK_ISP0			479
-#define HCLK_ISP1			480
-#define HCLK_ISP0_NOC			481
-#define HCLK_ISP1_NOC			482
-#define HCLK_ISP0_WRAPPER		483
-#define HCLK_ISP1_WRAPPER		484
-#define HCLK_RGA			485
-#define HCLK_RGA_NOC			486
-#define HCLK_HDCP			487
-#define HCLK_HDCP_NOC			488
-#define HCLK_HDCP22			489
-#define HCLK_VCODEC			490
-#define HCLK_VCODEC_NOC			491
-#define HCLK_VDU			492
-#define HCLK_VDU_NOC			493
-#define HCLK_SDIO			494
-#define HCLK_SDIO_NOC			495
-#define HCLK_SDIOAUDIO_NOC		496
-
-#define CLK_NR_CLKS			(HCLK_SDIOAUDIO_NOC + 1)
-
-/* pmu-clocks indices */
-
-#define PLL_PPLL			1
-
-#define SCLK_32K_SUSPEND_PMU		2
-#define SCLK_SPI3_PMU			3
-#define SCLK_TIMER12_PMU		4
-#define SCLK_TIMER13_PMU		5
-#define SCLK_UART4_PMU			6
-#define SCLK_PVTM_PMU			7
-#define SCLK_WIFI_PMU			8
-#define SCLK_I2C0_PMU			9
-#define SCLK_I2C4_PMU			10
-#define SCLK_I2C8_PMU			11
-
-#define PCLK_SRC_PMU			19
-#define PCLK_PMU			20
-#define PCLK_PMUGRF_PMU			21
-#define PCLK_INTMEM1_PMU		22
-#define PCLK_GPIO0_PMU			23
-#define PCLK_GPIO1_PMU			24
-#define PCLK_SGRF_PMU			25
-#define PCLK_NOC_PMU			26
-#define PCLK_I2C0_PMU			27
-#define PCLK_I2C4_PMU			28
-#define PCLK_I2C8_PMU			29
-#define PCLK_RKPWM_PMU			30
-#define PCLK_SPI3_PMU			31
-#define PCLK_TIMER_PMU			32
-#define PCLK_MAILBOX_PMU		33
-#define PCLK_UART4_PMU			34
-#define PCLK_WDT_M0_PMU			35
-
-#define FCLK_CM0S_SRC_PMU		44
-#define FCLK_CM0S_PMU			45
-#define SCLK_CM0S_PMU			46
-#define HCLK_CM0S_PMU			47
-#define DCLK_CM0S_PMU			48
-#define PCLK_INTR_ARB_PMU		49
-#define HCLK_NOC_PMU			50
-
-#define CLKPMU_NR_CLKS			(HCLK_NOC_PMU + 1)
-
-/* soft-reset indices */
-
-/* cru_softrst_con0 */
-#define SRST_CORE_L0			0
-#define SRST_CORE_B0			1
-#define SRST_CORE_PO_L0			2
-#define SRST_CORE_PO_B0			3
-#define SRST_L2_L			4
-#define SRST_L2_B			5
-#define SRST_ADB_L			6
-#define SRST_ADB_B			7
-#define SRST_A_CCI			8
-#define SRST_A_CCIM0_NOC		9
-#define SRST_A_CCIM1_NOC		10
-#define SRST_DBG_NOC			11
-
-/* cru_softrst_con1 */
-#define SRST_CORE_L0_T			16
-#define SRST_CORE_L1			17
-#define SRST_CORE_L2			18
-#define SRST_CORE_L3			19
-#define SRST_CORE_PO_L0_T		20
-#define SRST_CORE_PO_L1			21
-#define SRST_CORE_PO_L2			22
-#define SRST_CORE_PO_L3			23
-#define SRST_A_ADB400_GIC2COREL		24
-#define SRST_A_ADB400_COREL2GIC		25
-#define SRST_P_DBG_L			26
-#define SRST_L2_L_T			28
-#define SRST_ADB_L_T			29
-#define SRST_A_RKPERF_L			30
-#define SRST_PVTM_CORE_L		31
-
-/* cru_softrst_con2 */
-#define SRST_CORE_B0_T			32
-#define SRST_CORE_B1			33
-#define SRST_CORE_PO_B0_T		36
-#define SRST_CORE_PO_B1			37
-#define SRST_A_ADB400_GIC2COREB		40
-#define SRST_A_ADB400_COREB2GIC		41
-#define SRST_P_DBG_B			42
-#define SRST_L2_B_T			43
-#define SRST_ADB_B_T			45
-#define SRST_A_RKPERF_B			46
-#define SRST_PVTM_CORE_B		47
-
-/* cru_softrst_con3 */
-#define SRST_A_CCI_T			50
-#define SRST_A_CCIM0_NOC_T		51
-#define SRST_A_CCIM1_NOC_T		52
-#define SRST_A_ADB400M_PD_CORE_B_T	53
-#define SRST_A_ADB400M_PD_CORE_L_T	54
-#define SRST_DBG_NOC_T			55
-#define SRST_DBG_CXCS			56
-#define SRST_CCI_TRACE			57
-#define SRST_P_CCI_GRF			58
-
-/* cru_softrst_con4 */
-#define SRST_A_CENTER_MAIN_NOC		64
-#define SRST_A_CENTER_PERI_NOC		65
-#define SRST_P_CENTER_MAIN		66
-#define SRST_P_DDRMON			67
-#define SRST_P_CIC			68
-#define SRST_P_CENTER_SGRF		69
-#define SRST_DDR0_MSCH			70
-#define SRST_DDRCFG0_MSCH		71
-#define SRST_DDR0			72
-#define SRST_DDRPHY0			73
-#define SRST_DDR1_MSCH			74
-#define SRST_DDRCFG1_MSCH		75
-#define SRST_DDR1			76
-#define SRST_DDRPHY1			77
-#define SRST_DDR_CIC			78
-#define SRST_PVTM_DDR			79
-
-/* cru_softrst_con5 */
-#define SRST_A_VCODEC_NOC		80
-#define SRST_A_VCODEC			81
-#define SRST_H_VCODEC_NOC		82
-#define SRST_H_VCODEC			83
-#define SRST_A_VDU_NOC			88
-#define SRST_A_VDU			89
-#define SRST_H_VDU_NOC			90
-#define SRST_H_VDU			91
-#define SRST_VDU_CORE			92
-#define SRST_VDU_CA			93
-
-/* cru_softrst_con6 */
-#define SRST_A_IEP_NOC			96
-#define SRST_A_VOP_IEP			97
-#define SRST_A_IEP			98
-#define SRST_H_IEP_NOC			99
-#define SRST_H_IEP			100
-#define SRST_A_RGA_NOC			102
-#define SRST_A_RGA			103
-#define SRST_H_RGA_NOC			104
-#define SRST_H_RGA			105
-#define SRST_RGA_CORE			106
-#define SRST_EMMC_NOC			108
-#define SRST_EMMC			109
-#define SRST_EMMC_GRF			110
-
-/* cru_softrst_con7 */
-#define SRST_A_PERIHP_NOC		112
-#define SRST_P_PERIHP_GRF		113
-#define SRST_H_PERIHP_NOC		114
-#define SRST_USBHOST0			115
-#define SRST_HOSTC0_AUX			116
-#define SRST_HOST0_ARB			117
-#define SRST_USBHOST1			118
-#define SRST_HOSTC1_AUX			119
-#define SRST_HOST1_ARB			120
-#define SRST_SDIO0			121
-#define SRST_SDMMC			122
-#define SRST_HSIC			123
-#define SRST_HSIC_AUX			124
-#define SRST_AHB1TOM			125
-#define SRST_P_PERIHP_NOC		126
-#define SRST_HSICPHY			127
-
-/* cru_softrst_con8 */
-#define SRST_A_PCIE			128
-#define SRST_P_PCIE			129
-#define SRST_PCIE_CORE			130
-#define SRST_PCIE_MGMT			131
-#define SRST_PCIE_MGMT_STICKY		132
-#define SRST_PCIE_PIPE			133
-#define SRST_PCIE_PM			134
-#define SRST_PCIEPHY			135
-#define SRST_A_GMAC_NOC			136
-#define SRST_A_GMAC			137
-#define SRST_P_GMAC_NOC			138
-#define SRST_P_GMAC_GRF			140
-#define SRST_HSICPHY_POR		142
-#define SRST_HSICPHY_UTMI		143
-
-/* cru_softrst_con9 */
-#define SRST_USB2PHY0_POR		144
-#define SRST_USB2PHY0_UTMI_PORT0	145
-#define SRST_USB2PHY0_UTMI_PORT1	146
-#define SRST_USB2PHY0_EHCIPHY		147
-#define SRST_UPHY0_PIPE_L00		148
-#define SRST_UPHY0			149
-#define SRST_UPHY0_TCPDPWRUP		150
-#define SRST_USB2PHY1_POR		152
-#define SRST_USB2PHY1_UTMI_PORT0	153
-#define SRST_USB2PHY1_UTMI_PORT1	154
-#define SRST_USB2PHY1_EHCIPHY		155
-#define SRST_UPHY1_PIPE_L00		156
-#define SRST_UPHY1			157
-#define SRST_UPHY1_TCPDPWRUP		158
-
-/* cru_softrst_con10 */
-#define SRST_A_PERILP0_NOC		160
-#define SRST_A_DCF			161
-#define SRST_GIC500			162
-#define SRST_DMAC0_PERILP0		163
-#define SRST_DMAC1_PERILP0		164
-#define SRST_TZMA			165
-#define SRST_INTMEM			166
-#define SRST_ADB400_MST0		167
-#define SRST_ADB400_MST1		168
-#define SRST_ADB400_SLV0		169
-#define SRST_ADB400_SLV1		170
-#define SRST_H_PERILP0			171
-#define SRST_H_PERILP0_NOC		172
-#define SRST_ROM			173
-#define SRST_CRYPTO0_S			174
-#define SRST_CRYPTO0_M			175
-
-/* cru_softrst_con11 */
-#define SRST_P_DCF			176
-#define SRST_CM0S_NOC			177
-#define SRST_CM0S			178
-#define SRST_CM0S_DBG			179
-#define SRST_CM0S_PO			180
-#define SRST_CRYPTO0			181
-#define SRST_P_PERILP1_SGRF		182
-#define SRST_P_PERILP1_GRF		183
-#define SRST_CRYPTO1_S			184
-#define SRST_CRYPTO1_M			185
-#define SRST_CRYPTO1			186
-#define SRST_GIC_NOC			188
-#define SRST_SD_NOC			189
-#define SRST_SDIOAUDIO_BRG		190
-
-/* cru_softrst_con12 */
-#define SRST_H_PERILP1			192
-#define SRST_H_PERILP1_NOC		193
-#define SRST_H_I2S0_8CH			194
-#define SRST_H_I2S1_8CH			195
-#define SRST_H_I2S2_8CH			196
-#define SRST_H_SPDIF_8CH		197
-#define SRST_P_PERILP1_NOC		198
-#define SRST_P_EFUSE_1024		199
-#define SRST_P_EFUSE_1024S		200
-#define SRST_P_I2C0			201
-#define SRST_P_I2C1			202
-#define SRST_P_I2C2			203
-#define SRST_P_I2C3			204
-#define SRST_P_I2C4			205
-#define SRST_P_I2C5			206
-#define SRST_P_MAILBOX0			207
-
-/* cru_softrst_con13 */
-#define SRST_P_UART0			208
-#define SRST_P_UART1			209
-#define SRST_P_UART2			210
-#define SRST_P_UART3			211
-#define SRST_P_SARADC			212
-#define SRST_P_TSADC			213
-#define SRST_P_SPI0			214
-#define SRST_P_SPI1			215
-#define SRST_P_SPI2			216
-#define SRST_P_SPI3			217
-#define SRST_P_SPI4			218
-#define SRST_SPI0			219
-#define SRST_SPI1			220
-#define SRST_SPI2			221
-#define SRST_SPI3			222
-#define SRST_SPI4			223
-
-/* cru_softrst_con14 */
-#define SRST_I2S0_8CH			224
-#define SRST_I2S1_8CH			225
-#define SRST_I2S2_8CH			226
-#define SRST_SPDIF_8CH			227
-#define SRST_UART0			228
-#define SRST_UART1			229
-#define SRST_UART2			230
-#define SRST_UART3			231
-#define SRST_TSADC			232
-#define SRST_I2C0			233
-#define SRST_I2C1			234
-#define SRST_I2C2			235
-#define SRST_I2C3			236
-#define SRST_I2C4			237
-#define SRST_I2C5			238
-#define SRST_SDIOAUDIO_NOC		239
-
-/* cru_softrst_con15 */
-#define SRST_A_VIO_NOC			240
-#define SRST_A_HDCP_NOC			241
-#define SRST_A_HDCP			242
-#define SRST_H_HDCP_NOC			243
-#define SRST_H_HDCP			244
-#define SRST_P_HDCP_NOC			245
-#define SRST_P_HDCP			246
-#define SRST_P_HDMI_CTRL		247
-#define SRST_P_DP_CTRL			248
-#define SRST_S_DP_CTRL			249
-#define SRST_C_DP_CTRL			250
-#define SRST_P_MIPI_DSI0		251
-#define SRST_P_MIPI_DSI1		252
-#define SRST_DP_CORE			253
-#define SRST_DP_I2S			254
-
-/* cru_softrst_con16 */
-#define SRST_GASKET			256
-#define SRST_VIO_GRF			258
-#define SRST_DPTX_SPDIF_REC		259
-#define SRST_HDMI_CTRL			260
-#define SRST_HDCP_CTRL			261
-#define SRST_A_ISP0_NOC			262
-#define SRST_A_ISP1_NOC			263
-#define SRST_H_ISP0_NOC			266
-#define SRST_H_ISP1_NOC			267
-#define SRST_H_ISP0			268
-#define SRST_H_ISP1			269
-#define SRST_ISP0			270
-#define SRST_ISP1			271
-
-/* cru_softrst_con17 */
-#define SRST_A_VOP0_NOC			272
-#define SRST_A_VOP1_NOC			273
-#define SRST_A_VOP0			274
-#define SRST_A_VOP1			275
-#define SRST_H_VOP0_NOC			276
-#define SRST_H_VOP1_NOC			277
-#define SRST_H_VOP0			278
-#define SRST_H_VOP1			279
-#define SRST_D_VOP0			280
-#define SRST_D_VOP1			281
-#define SRST_VOP0_PWM			282
-#define SRST_VOP1_PWM			283
-#define SRST_P_EDP_NOC			284
-#define SRST_P_EDP_CTRL			285
-
-/* cru_softrst_con18 */
-#define SRST_A_GPU			288
-#define SRST_A_GPU_NOC			289
-#define SRST_A_GPU_GRF			290
-#define SRST_PVTM_GPU			291
-#define SRST_A_USB3_NOC			292
-#define SRST_A_USB3_OTG0		293
-#define SRST_A_USB3_OTG1		294
-#define SRST_A_USB3_GRF			295
-#define SRST_PMU			296
-
-/* cru_softrst_con19 */
-#define SRST_P_TIMER0_5			304
-#define SRST_TIMER0			305
-#define SRST_TIMER1			306
-#define SRST_TIMER2			307
-#define SRST_TIMER3			308
-#define SRST_TIMER4			309
-#define SRST_TIMER5			310
-#define SRST_P_TIMER6_11		311
-#define SRST_TIMER6			312
-#define SRST_TIMER7			313
-#define SRST_TIMER8			314
-#define SRST_TIMER9			315
-#define SRST_TIMER10			316
-#define SRST_TIMER11			317
-#define SRST_P_INTR_ARB_PMU		318
-#define SRST_P_ALIVE_SGRF		319
-
-/* cru_softrst_con20 */
-#define SRST_P_GPIO2			320
-#define SRST_P_GPIO3			321
-#define SRST_P_GPIO4			322
-#define SRST_P_GRF			323
-#define SRST_P_ALIVE_NOC		324
-#define SRST_P_WDT0			325
-#define SRST_P_WDT1			326
-#define SRST_P_INTR_ARB			327
-#define SRST_P_UPHY0_DPTX		328
-#define SRST_P_UPHY0_APB		330
-#define SRST_P_UPHY0_TCPHY		332
-#define SRST_P_UPHY1_TCPHY		333
-#define SRST_P_UPHY0_TCPDCTRL		334
-#define SRST_P_UPHY1_TCPDCTRL		335
-
-/* pmu soft-reset indices */
-
-/* pmu_cru_softrst_con0 */
-#define SRST_P_NOC			0
-#define SRST_P_INTMEM			1
-#define SRST_H_CM0S			2
-#define SRST_H_CM0S_NOC			3
-#define SRST_DBG_CM0S			4
-#define SRST_PO_CM0S			5
-#define SRST_P_SPI6			6
-#define SRST_SPI6			7
-#define SRST_P_TIMER_0_1		8
-#define SRST_P_TIMER_0			9
-#define SRST_P_TIMER_1			10
-#define SRST_P_UART4			11
-#define SRST_UART4			12
-#define SRST_P_WDT			13
-
-/* pmu_cru_softrst_con1 */
-#define SRST_P_I2C6			16
-#define SRST_P_I2C7			17
-#define SRST_P_I2C8			18
-#define SRST_P_MAILBOX			19
-#define SRST_P_RKPWM			20
-#define SRST_P_PMUGRF			21
-#define SRST_P_SGRF			22
-#define SRST_P_GPIO0			23
-#define SRST_P_GPIO1			24
-#define SRST_P_CRU			25
-#define SRST_P_INTR			26
-#define SRST_PVTM			27
-#define SRST_I2C6			28
-#define SRST_I2C7			29
-#define SRST_I2C8			30
-
-#endif
diff --git a/include/dt-bindings/power/rk3399-power.h b/include/dt-bindings/power/rk3399-power.h
deleted file mode 100644
index 168b3bfbd6f5..000000000000
--- a/include/dt-bindings/power/rk3399-power.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef __DT_BINDINGS_POWER_RK3399_POWER_H__
-#define __DT_BINDINGS_POWER_RK3399_POWER_H__
-
-/* VD_CORE_L */
-#define RK3399_PD_A53_L0	0
-#define RK3399_PD_A53_L1	1
-#define RK3399_PD_A53_L2	2
-#define RK3399_PD_A53_L3	3
-#define RK3399_PD_SCU_L		4
-
-/* VD_CORE_B */
-#define RK3399_PD_A72_B0	5
-#define RK3399_PD_A72_B1	6
-#define RK3399_PD_SCU_B		7
-
-/* VD_LOGIC */
-#define RK3399_PD_TCPD0		8
-#define RK3399_PD_TCPD1		9
-#define RK3399_PD_CCI		10
-#define RK3399_PD_CCI0		11
-#define RK3399_PD_CCI1		12
-#define RK3399_PD_PERILP	13
-#define RK3399_PD_PERIHP	14
-#define RK3399_PD_VIO		15
-#define RK3399_PD_VO		16
-#define RK3399_PD_VOPB		17
-#define RK3399_PD_VOPL		18
-#define RK3399_PD_ISP0		19
-#define RK3399_PD_ISP1		20
-#define RK3399_PD_HDCP		21
-#define RK3399_PD_GMAC		22
-#define RK3399_PD_EMMC		23
-#define RK3399_PD_USB3		24
-#define RK3399_PD_EDP		25
-#define RK3399_PD_GIC		26
-#define RK3399_PD_SD		27
-#define RK3399_PD_SDIOAUDIO	28
-#define RK3399_PD_ALIVE		29
-
-/* VD_CENTER */
-#define RK3399_PD_CENTER	30
-#define RK3399_PD_VCODEC	31
-#define RK3399_PD_VDU		32
-#define RK3399_PD_RGA		33
-#define RK3399_PD_IEP		34
-
-/* VD_GPU */
-#define RK3399_PD_GPU		35
-
-/* VD_PMU */
-#define RK3399_PD_PMU		36
-
-#endif
