Message ID | 20240428142406.28445-3-heesub@gmail.com |
---|---|
State | Accepted |
Commit | 6a4c90093b665b321219e5e93e2467f7597cbb6a |
Delegated to: | Patrice Chotard |
Headers | show |
Series | [1/5] dts: stm32mp157c-odyssey: set PLL4_P to 125Mhz for ETH_CLK | expand |
On 4/28/24 16:24, Heesub Shin wrote: > In Odyssey board, KSZ9031 is at the PHY address 0x7, not 0x0. This > commit fixes it. > > Signed-off-by: Heesub Shin <heesub@gmail.com> > --- > arch/arm/dts/stm32mp157c-odyssey.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts > index 53ba018197..b6210cf8b2 100644 > --- a/arch/arm/dts/stm32mp157c-odyssey.dts > +++ b/arch/arm/dts/stm32mp157c-odyssey.dts > @@ -81,8 +81,8 @@ > #address-cells = <1>; > #size-cells = <0>; > compatible = "snps,dwmac-mdio"; > - phy0: ethernet-phy@0 { > - reg = <0>; > + phy0: ethernet-phy@7 { > + reg = <7>; > }; > }; > }; Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Thanks Patrice
On 4/28/24 16:24, Heesub Shin wrote: > In Odyssey board, KSZ9031 is at the PHY address 0x7, not 0x0. This > commit fixes it. > > Signed-off-by: Heesub Shin <heesub@gmail.com> > --- > arch/arm/dts/stm32mp157c-odyssey.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts > index 53ba018197..b6210cf8b2 100644 > --- a/arch/arm/dts/stm32mp157c-odyssey.dts > +++ b/arch/arm/dts/stm32mp157c-odyssey.dts > @@ -81,8 +81,8 @@ > #address-cells = <1>; > #size-cells = <0>; > compatible = "snps,dwmac-mdio"; > - phy0: ethernet-phy@0 { > - reg = <0>; > + phy0: ethernet-phy@7 { > + reg = <7>; > }; > }; > }; Applied to u-boot-stm32/next Thanks Patrice
On 4/28/24 16:24, Heesub Shin wrote: > In Odyssey board, KSZ9031 is at the PHY address 0x7, not 0x0. This > commit fixes it. > > Signed-off-by: Heesub Shin <heesub@gmail.com> > --- > arch/arm/dts/stm32mp157c-odyssey.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts > index 53ba018197..b6210cf8b2 100644 > --- a/arch/arm/dts/stm32mp157c-odyssey.dts > +++ b/arch/arm/dts/stm32mp157c-odyssey.dts > @@ -81,8 +81,8 @@ > #address-cells = <1>; > #size-cells = <0>; > compatible = "snps,dwmac-mdio"; > - phy0: ethernet-phy@0 { > - reg = <0>; > + phy0: ethernet-phy@7 { > + reg = <7>; > }; > }; > }; Applied to u-boot-stm32/next Thanks Patrice
diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts index 53ba018197..b6210cf8b2 100644 --- a/arch/arm/dts/stm32mp157c-odyssey.dts +++ b/arch/arm/dts/stm32mp157c-odyssey.dts @@ -81,8 +81,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { - reg = <0>; + phy0: ethernet-phy@7 { + reg = <7>; }; }; };
In Odyssey board, KSZ9031 is at the PHY address 0x7, not 0x0. This commit fixes it. Signed-off-by: Heesub Shin <heesub@gmail.com> --- arch/arm/dts/stm32mp157c-odyssey.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)