@@ -3,11 +3,7 @@
* Copyright 2019 NXP
*/
-/ {
- binman: binman {
- multiple-images;
- };
-};
+#include "imx8mq-u-boot.dtsi"
&pinctrl_uart1 {
bootph-pre-ram;
@@ -16,108 +12,3 @@
&uart1 {
bootph-pre-ram;
};
-
-&binman {
- u-boot-spl-ddr {
- filename = "u-boot-spl-ddr.bin";
- pad-byte = <0xff>;
- align-size = <4>;
- align = <4>;
-
- u-boot-spl {
- align-end = <4>;
- };
-
- ddr-1d-imem-fw {
- filename = "lpddr4_pmu_train_1d_imem.bin";
- type = "blob-ext";
- align-end = <4>;
- };
-
- ddr-1d-dmem-fw {
- filename = "lpddr4_pmu_train_1d_dmem.bin";
- type = "blob-ext";
- align-end = <4>;
- };
-
- ddr-2d-imem-fw {
- filename = "lpddr4_pmu_train_2d_imem.bin";
- type = "blob-ext";
- align-end = <4>;
- };
-
- ddr-2d-dmem-fw {
- filename = "lpddr4_pmu_train_2d_dmem.bin";
- type = "blob-ext";
- align-end = <4>;
- };
- };
-
- flash {
- mkimage {
- args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
-
- blob {
- filename = "u-boot-spl-ddr.bin";
- };
- };
- };
-
- itb {
- filename = "u-boot.itb";
-
- fit {
- description = "Configuration to load ATF before U-Boot";
- #address-cells = <1>;
- fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-
- images {
- uboot {
- description = "U-Boot (64-bit)";
- type = "standalone";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
-
- uboot_blob: blob-ext {
- filename = "u-boot-nodtb.bin";
- };
- };
-
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- load = <0x910000>;
- entry = <0x910000>;
-
- atf_blob: blob-ext {
- filename = "bl31.bin";
- };
- };
-
- fdt {
- description = "NAME";
- type = "flat_dt";
- compression = "none";
-
- uboot_fdt_blob: blob-ext {
- filename = "u-boot.dtb";
- };
- };
- };
-
- configurations {
- default = "conf";
-
- conf {
- description = "NAME";
- firmware = "uboot";
- loadables = "atf";
- fdt = "fdt";
- };
- };
- };
- };
-};
Include imx8mq-u-boot.dtsi in the board -u-boot.dtsi to pull in binman configuration instead of duplicating it in the board -u-boot.dtsi again. Drop the duplicate binman configuration. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Adam Ford <aford173@gmail.com> Cc: Alper Nebi Yasak <alpernebiyasak@gmail.com> Cc: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Francesco Dolcini <francesco.dolcini@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Eichenberger <stefan.eichenberger@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Tom Rini <trini@konsulko.com> Cc: kernel@puri.sm Cc: u-boot@dh-electronics.com Cc: u-boot@lists.denx.de --- V2: No change --- arch/arm/dts/imx8mq-cm-u-boot.dtsi | 111 +---------------------------- 1 file changed, 1 insertion(+), 110 deletions(-)