@@ -611,6 +611,7 @@ F: arch/arm/include/asm/arch-adi/
F: arch/arm/mach-sc5xx/
F: drivers/clk/adi/
F: drivers/serial/serial_adi_uart4.c
+F: drivers/timer/adi_sc5xx_timer.c
F: include/env/adi/
ARM SNAPDRAGON
@@ -50,6 +50,14 @@ config TIMER_EARLY
use an early timer. These functions must be supported by your timer
driver: timer_early_get_count() and timer_early_get_rate().
+config ADI_SC5XX_TIMER
+ bool "ADI ADSP-SC5xx Timer Support"
+ depends on TIMER && (SC57X || SC58X || SC59X || SC59X_64)
+ help
+ gptimer based timer support on ADI's ADSP-SC5xx platforms. Available
+ but not required on sc59x-64-based platforms (598 and similar).
+ Required on 32-bit platforms (sc57x, sc58x, sc594 and earlier).
+
config ALTERA_TIMER
bool "Altera timer support"
depends on TIMER
@@ -3,6 +3,7 @@
# Copyright (C) 2015 Thomas Chou <thomas@wytron.com.tw>
obj-y += timer-uclass.o
+obj-$(CONFIG_ADI_SC5XX_TIMER) += adi_sc5xx_timer.o
obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o
obj-$(CONFIG_$(SPL_)ANDES_PLMT_TIMER) += andes_plmt_timer.o
obj-$(CONFIG_ARC_TIMER) += arc_timer.o
new file mode 100644
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2022 - Analog Devices, Inc.
+ *
+ * Written and/or maintained by Timesys Corporation
+ *
+ * Converted to driver model by Nathan Barrett-Morrison
+ *
+ * Author: Greg Malysa <greg.malysa@timesys.com>
+ * Additional Contact: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
+ *
+ * dm timer implementation for ADI ADSP-SC5xx SoCs
+ *
+ */
+
+#include <clk.h>
+#include <dm.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <linux/compiler_types.h>
+
+/*
+ * Timer Configuration Register Bits
+ */
+#define TIMER_OUT_DIS 0x0800
+#define TIMER_PULSE_HI 0x0080
+#define TIMER_MODE_PWM_CONT 0x000c
+
+#define __BFP(m) u16 m; u16 __pad_##m
+
+struct gptimer3 {
+ __BFP(config);
+ u32 counter;
+ u32 period;
+ u32 width;
+ u32 delay;
+};
+
+struct gptimer3_group_regs {
+ __BFP(run);
+ __BFP(enable);
+ __BFP(disable);
+ __BFP(stop_cfg);
+ __BFP(stop_cfg_set);
+ __BFP(stop_cfg_clr);
+ __BFP(data_imsk);
+ __BFP(stat_imsk);
+ __BFP(tr_msk);
+ __BFP(tr_ie);
+ __BFP(data_ilat);
+ __BFP(stat_ilat);
+ __BFP(err_status);
+ __BFP(bcast_per);
+ __BFP(bcast_wid);
+ __BFP(bcast_dly);
+};
+
+#define MAX_TIM_LOAD 0xFFFFFFFF
+
+struct adi_gptimer_priv {
+ struct gptimer3_group_regs __iomem *timer_group;
+ struct gptimer3 __iomem *timer_base;
+ u32 prev;
+ u64 upper;
+};
+
+static u64 adi_gptimer_get_count(struct udevice *udev)
+{
+ struct adi_gptimer_priv *priv = dev_get_priv(udev);
+
+ u32 now = readl(&priv->timer_base->counter);
+
+ if (now < priv->prev)
+ priv->upper += (1ull << 32);
+
+ priv->prev = now;
+
+ return (priv->upper + (u64)now);
+}
+
+static const struct timer_ops adi_gptimer_ops = {
+ .get_count = adi_gptimer_get_count,
+};
+
+static int adi_gptimer_probe(struct udevice *udev)
+{
+ struct timer_dev_priv *uc_priv = dev_get_uclass_priv(udev);
+ struct adi_gptimer_priv *priv = dev_get_priv(udev);
+ struct clk clk;
+ u16 imask;
+ int ret;
+
+ priv->timer_group = dev_remap_addr_index(udev, 0);
+ priv->timer_base = dev_remap_addr_index(udev, 1);
+ priv->upper = 0;
+ priv->prev = 0;
+
+ if (!priv->timer_group || !priv->timer_base) {
+ dev_err(udev, "Missing timer_group or timer_base reg entries\n");
+ return -ENODEV;
+ }
+
+ ret = clk_get_by_index(udev, 0, &clk);
+ if (ret < 0) {
+ dev_err(udev, "Missing clock reference for timer\n");
+ return ret;
+ }
+
+ ret = clk_enable(&clk);
+ if (ret) {
+ dev_err(udev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ uc_priv->clock_rate = clk_get_rate(&clk);
+
+ /* Enable timer */
+ writew(TIMER_OUT_DIS | TIMER_MODE_PWM_CONT | TIMER_PULSE_HI,
+ &priv->timer_base->config);
+ writel(MAX_TIM_LOAD, &priv->timer_base->period);
+ writel(MAX_TIM_LOAD - 1, &priv->timer_base->width);
+
+ /* We only use timer 0 in uboot */
+ imask = readw(&priv->timer_group->data_imsk);
+ imask &= ~(1 << 0);
+ writew(imask, &priv->timer_group->data_imsk);
+ writew((1 << 0), &priv->timer_group->enable);
+
+ return 0;
+}
+
+static const struct udevice_id adi_gptimer_ids[] = {
+ { .compatible = "adi,sc5xx-gptimer" },
+ { },
+};
+
+U_BOOT_DRIVER(adi_gptimer) = {
+ .name = "adi_gptimer",
+ .id = UCLASS_TIMER,
+ .of_match = adi_gptimer_ids,
+ .priv_auto = sizeof(struct adi_gptimer_priv),
+ .probe = adi_gptimer_probe,
+ .ops = &adi_gptimer_ops,
+};