diff mbox series

[4/4] sunxi: H616: add Tanix TX1 support

Message ID 20240424001808.14388-5-andre.przywara@arm.com
State Accepted
Delegated to: Andre Przywara
Headers show
Series sunxi: devicetree updates plus new boards | expand

Commit Message

Andre Przywara April 24, 2024, 12:18 a.m. UTC 
The Tanix TX1 is a tiny TV box, featuring the Allwinner H313 SoC with up
to 2GB of DRAM and 16GB of eMMC. There is no SD card or Ethernet port on
this small device, but it can be booted via the USB debug "FEL" mode.
The bootloader could then be written to the eMMC.

Add the defconfig for that board, and add the devicetree file to the
Makefile, for it to be built.
The DRAM parameters were taken from the vendor firmware on the eMMC.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm/dts/Makefile       |  1 +
 configs/tanix_tx1_defconfig | 25 +++++++++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 configs/tanix_tx1_defconfig
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 127345975ef..69b0d6a9ad7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -779,6 +779,7 @@  dtb-$(CONFIG_MACH_SUN50I_H6) += \
 	sun50i-h6-tanix-tx6.dtb \
 	sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_MACH_SUN50I_H616) += \
+	sun50i-h313-tanix-tx1.dtb \
 	sun50i-h616-orangepi-zero2.dtb \
 	sun50i-h618-orangepi-zero2w.dtb \
 	sun50i-h618-orangepi-zero3.dtb \
diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig
new file mode 100644
index 00000000000..9915fff4a00
--- /dev/null
+++ b/configs/tanix_tx1_defconfig
@@ -0,0 +1,25 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606
+CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d
+CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1919
+CONFIG_DRAM_SUN50I_H616_ODT_EN=0x9988eeee
+CONFIG_DRAM_SUN50I_H616_TPR6=0x2fb08080
+CONFIG_DRAM_SUN50I_H616_TPR10=0x402f4469
+CONFIG_DRAM_SUN50I_H616_TPR11=0x0e0f0d0d
+CONFIG_DRAM_SUN50I_H616_TPR12=0x11131213
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_LPDDR3=y
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_AXP313_POWER=y
+CONFIG_AXP_DCDC3_VOLT=1200
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y