Message ID | 20240219084300.8228-1-othacehe@gnu.org |
---|---|
State | Superseded |
Delegated to: | Marek Vasut |
Headers | show |
Series | usb: ehci-mx6: Add i.MX93 support | expand |
Hi Mathieu, On Mon, Feb 19, 2024 at 5:43 AM Mathieu Othacehe <othacehe@gnu.org> wrote: > > i.MX93 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 > driver. > > Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> You missed copying Marek Vasut, who is the USB maintainer. > --- > drivers/usb/host/Kconfig | 6 +++--- > drivers/usb/host/ehci-mx6.c | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 0dd5736433c..f96027d7bd2 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -210,10 +210,10 @@ config USB_EHCI_MX6 > > config USB_EHCI_MX7 > bool "Support for i.MX7 on-chip EHCI USB controller" > - depends on ARCH_MX7 || IMX8M > + depends on ARCH_MX7 || IMX8M || IMX93 > select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7 > - select PHY if IMX8M > - select NOP_PHY if IMX8M > + select PHY if IMX8M || IMX93 > + select NOP_PHY if IMX8M || IMX93 > default y > ---help--- > Enables support for the on-chip EHCI controller on i.MX7 SoCs. > diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c > index a9ed5e7a0d5..a35fcca43a2 100644 > --- a/drivers/usb/host/ehci-mx6.c > +++ b/drivers/usb/host/ehci-mx6.c > @@ -538,7 +538,7 @@ static int ehci_usb_phy_mode(struct udevice *dev) > plat->init_type = USB_INIT_DEVICE; > else > plat->init_type = USB_INIT_HOST; > - } else if (is_mx7() || is_imx8mm() || is_imx8mn()) { > + } else if (is_mx7() || is_imx8mm() || is_imx8mn() || is_imx93()) { > phy_status = (void __iomem *)(addr + > USBNC_PHY_STATUS_OFFSET); > val = readl(phy_status); > -- > 2.41.0 >
On 2/19/24 14:18, Fabio Estevam wrote: > Hi Mathieu, > > On Mon, Feb 19, 2024 at 5:43 AM Mathieu Othacehe <othacehe@gnu.org> wrote: >> >> i.MX93 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 >> driver. >> >> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> > > You missed copying Marek Vasut, who is the USB maintainer. The patch itself looks fine: Reviewed-by: Marek Vasut <marex@denx.de> Just send a V2 with the collected tags so it can be applied. Thanks !
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0dd5736433c..f96027d7bd2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -210,10 +210,10 @@ config USB_EHCI_MX6 config USB_EHCI_MX7 bool "Support for i.MX7 on-chip EHCI USB controller" - depends on ARCH_MX7 || IMX8M + depends on ARCH_MX7 || IMX8M || IMX93 select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7 - select PHY if IMX8M - select NOP_PHY if IMX8M + select PHY if IMX8M || IMX93 + select NOP_PHY if IMX8M || IMX93 default y ---help--- Enables support for the on-chip EHCI controller on i.MX7 SoCs. diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index a9ed5e7a0d5..a35fcca43a2 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -538,7 +538,7 @@ static int ehci_usb_phy_mode(struct udevice *dev) plat->init_type = USB_INIT_DEVICE; else plat->init_type = USB_INIT_HOST; - } else if (is_mx7() || is_imx8mm() || is_imx8mn()) { + } else if (is_mx7() || is_imx8mm() || is_imx8mn() || is_imx93()) { phy_status = (void __iomem *)(addr + USBNC_PHY_STATUS_OFFSET); val = readl(phy_status);
i.MX93 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> --- drivers/usb/host/Kconfig | 6 +++--- drivers/usb/host/ehci-mx6.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)