@@ -776,6 +776,8 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \
sun8i-s3-pinecube.dtb \
sun8i-v3-sl631-imx179.dtb \
sun8i-v3s-licheepi-zero.dtb
+dtb-$(CONFIG_MACH_SUN8I_R528) += \
+ sun8i-t113s-mangopi-mq-r-t113.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-bananapi-m2-plus.dtb \
sun50i-h5-emlid-neutis-n5-devboard.dtb \
new file mode 100644
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-t113s-mangopi-mq-r-t113"
+CONFIG_SPL=y
+CONFIG_MACH_SUN8I_R528=y
+CONFIG_DRAM_CLK=792
+CONFIG_DRAM_ZQ=8092667
+CONFIG_SUNXI_MINIMUM_DRAM_MB=128
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_DRAM_SUNXI_ODT_EN=0
+CONFIG_DRAM_SUNXI_TPR0=0x004a2195
+CONFIG_DRAM_SUNXI_TPR11=0x340000
+CONFIG_DRAM_SUNXI_TPR12=0x46
+CONFIG_DRAM_SUNXI_TPR13=0x34000100
+CONFIG_CONS_INDEX=4
The MangoPi MQ-R board uses an Allwinner T113s Soc (with 128MB of embedded DRAM), support for which was just added to the code. Since the devicetree was already synced from the latest Linux kernel tree, all we need is a _defconfig file to add support for the board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/dts/Makefile | 2 ++ configs/mangopi_mq_r_defconfig | 15 +++++++++++++++ 2 files changed, 17 insertions(+) create mode 100644 configs/mangopi_mq_r_defconfig