From patchwork Wed Oct 18 15:50:13 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 1850975 X-Patchwork-Delegate: jh80.chung@samsung.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4S9b0k6NwWz20Zj for ; Thu, 19 Oct 2023 02:50:46 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 24F7586FCC; Wed, 18 Oct 2023 17:50:30 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=arm.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id 09B7A86FBE; Wed, 18 Oct 2023 17:50:28 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by phobos.denx.de (Postfix) with ESMTP id B971A86FC5 for ; Wed, 18 Oct 2023 17:50:23 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=fail (p=none dis=none) header.from=arm.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=andre.przywara@arm.com Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 52CCE1424; Wed, 18 Oct 2023 08:51:04 -0700 (PDT) Received: from donnerap.arm.com (donnerap.manchester.arm.com [10.32.101.43]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id BCAB83F64C; Wed, 18 Oct 2023 08:50:21 -0700 (PDT) From: Andre Przywara To: Jagan Teki , Jaehoon Chung Cc: Samuel Holland , Jernej Skrabec , SASANO Takayoshi , Mikhail Kalashnikov , Piotr Oniszczuk , u-boot@lists.denx.de, linux-sunxi@lists.linux.dev Subject: [PATCH 2/3] power: pmic: sunxi: add AXP313 SPL driver Date: Wed, 18 Oct 2023 16:50:13 +0100 Message-Id: <20231018155014.383566-3-andre.przywara@arm.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231018155014.383566-1-andre.przywara@arm.com> References: <20231018155014.383566-1-andre.przywara@arm.com> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean On boards using the AXP313 PMIC, the DRAM rail is often not setup correctly at reset time, so we have to program the PMIC very early in the SPL, before running the DRAM initialisation. Add a simple AXP313 PMIC driver that knows about DCDC2(CPU) and DCDC3(DRAM), so that we can bump up the voltage before the DRAM init. Signed-off-by: Andre Przywara Acked-by: Jernej Skrabec --- arch/arm/mach-sunxi/pmic_bus.c | 3 + board/sunxi/board.c | 3 +- drivers/power/Kconfig | 17 ++++- drivers/power/Makefile | 1 + drivers/power/axp313.c | 134 +++++++++++++++++++++++++++++++++ 5 files changed, 155 insertions(+), 3 deletions(-) create mode 100644 drivers/power/axp313.c diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c index c0908406370..8e7625fe057 100644 --- a/arch/arm/mach-sunxi/pmic_bus.c +++ b/arch/arm/mach-sunxi/pmic_bus.c @@ -22,6 +22,7 @@ #define AXP209_I2C_ADDR 0x34 #define AXP305_I2C_ADDR 0x36 +#define AXP313_I2C_ADDR 0x36 #define AXP221_CHIP_ADDR 0x68 @@ -34,6 +35,8 @@ static int pmic_i2c_address(void) return AXP152_I2C_ADDR; if (IS_ENABLED(CONFIG_AXP305_POWER)) return AXP305_I2C_ADDR; + if (IS_ENABLED(CONFIG_AXP313_POWER)) + return AXP313_I2C_ADDR; /* Other AXP2xx and AXP8xx variants */ return AXP209_I2C_ADDR; diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 65d79a02c25..39b0ad73a9c 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -584,7 +584,8 @@ void sunxi_board_init(void) #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ defined CONFIG_AXP221_POWER || defined CONFIG_AXP305_POWER || \ - defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER + defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER || \ + defined CONFIG_AXP313_POWER power_failed = axp_init(); if (IS_ENABLED(CONFIG_AXP_DISABLE_BOOT_ON_POWERON) && !power_failed) { diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 83cb31c937a..a9117d215eb 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -101,6 +101,15 @@ config AXP305_POWER Select this to enable support for the axp305 pmic found on most H616 boards. +config AXP313_POWER + bool "axp311 pmic support" + depends on MACH_SUN50I_H616 + select AXP_PMIC_BUS + select CMD_POWEROFF + ---help--- + Select this to enable support for the AXP313 PMIC found on some + H616 boards. + config AXP809_POWER bool "axp809 pmic support" depends on MACH_SUN9I @@ -143,9 +152,10 @@ config AXP_DCDC1_VOLT config AXP_DCDC2_VOLT int "axp pmic dcdc2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER default 900 if AXP818_POWER default 1400 if AXP152_POWER || AXP209_POWER + default 1000 if AXP313_POWER default 1200 if MACH_SUN6I default 1100 if MACH_SUN8I default 0 if MACH_SUN9I @@ -158,13 +168,15 @@ config AXP_DCDC2_VOLT On A80 boards dcdc2 powers the GPU and can be left off. On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V. On R40 boards dcdc2 is VDD-CPU and should be 1.1V + On boards using the AXP313 it's often VDD-CPU. config AXP_DCDC3_VOLT int "axp pmic dcdc3 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER default 900 if AXP809_POWER || AXP818_POWER default 1500 if AXP152_POWER default 1250 if AXP209_POWER + default 1100 if AXP313_POWER default 1100 if MACH_SUN8I_R40 default 1200 if MACH_SUN6I || MACH_SUN8I ---help--- @@ -177,6 +189,7 @@ config AXP_DCDC3_VOLT On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V. On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V. On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V. + On boards using the AXP313 it's often VDD-DRAM and should be 1.1V for LPDDR4. config AXP_DCDC4_VOLT int "axp pmic dcdc4 voltage" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index ba64b2c5938..c7ee4595fc8 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP221_POWER) += axp221.o obj-$(CONFIG_AXP305_POWER) += axp305.o +obj-$(CONFIG_AXP313_POWER) += axp313.o obj-$(CONFIG_AXP809_POWER) += axp809.o obj-$(CONFIG_AXP818_POWER) += axp818.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o diff --git a/drivers/power/axp313.c b/drivers/power/axp313.c new file mode 100644 index 00000000000..bbc9e911115 --- /dev/null +++ b/drivers/power/axp313.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * AXP313(a) driver + * + * (C) Copyright 2023 Arm Ltd. + * + * Based on axp305.c + * (C) Copyright 2020 Jernej Skrabec + * (C) Copyright 2014 Hans de Goede + * (C) Copyright 2013 Oliver Schinagl + */ + +#include +#include +#include +#include +#include + +enum axp313_reg { + AXP313_CHIP_VERSION = 0x03, + AXP313_OUTPUT_CTRL = 0x10, + AXP313_DCDC1_CTRL = 0x13, + AXP313_SHUTDOWN = 0x1a, +}; + +#define AXP313_CHIP_VERSION_MASK 0xcf +#define AXP313_CHIP_VERSION_AXP1530 0x48 +#define AXP313_CHIP_VERSION_AXP313A 0x4b +#define AXP313_CHIP_VERSION_AXP313B 0x4c + +#define AXP313_DCDC_SPLIT_OFFSET 71 +#define AXP313_DCDC_SPLIT_MVOLT 1200 + +#define AXP313_POWEROFF BIT(7) + +static u8 mvolt_to_cfg(int mvolt, int min, int max, int div) +{ + if (mvolt < min) + mvolt = min; + else if (mvolt > max) + mvolt = max; + + return (mvolt - min) / div; +} + +static int axp_set_dcdc(int dcdc_num, unsigned int mvolt) +{ + int ret; + u8 cfg, enable_mask = 1U << (dcdc_num - 1); + int volt_reg = AXP313_DCDC1_CTRL + dcdc_num - 1; + int max_mV; + + switch (dcdc_num) { + case 1: + case 2: + max_mV = 1540; + break; + case 3: + /* + * The manual defines a different split point, but tests + * show that it's the same 1200mV as for DCDC1/2. + */ + max_mV = 1840; + break; + default: + return -EINVAL; + } + + if (mvolt > AXP313_DCDC_SPLIT_MVOLT) + cfg = AXP313_DCDC_SPLIT_OFFSET + mvolt_to_cfg(mvolt, + AXP313_DCDC_SPLIT_MVOLT + 20, max_mV, 20); + else + cfg = mvolt_to_cfg(mvolt, 500, AXP313_DCDC_SPLIT_MVOLT, 10); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP313_OUTPUT_CTRL, enable_mask); + + debug("DCDC%d: writing 0x%x to reg 0x%x\n", dcdc_num, cfg, volt_reg); + ret = pmic_bus_write(volt_reg, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP313_OUTPUT_CTRL, enable_mask); +} + +int axp_set_dcdc2(unsigned int mvolt) +{ + return axp_set_dcdc(2, mvolt); +} + +int axp_set_dcdc3(unsigned int mvolt) +{ + return axp_set_dcdc(3, mvolt); +} + +int axp_init(void) +{ + u8 axp_chip_id; + int ret; + + ret = pmic_bus_init(); + if (ret) + return ret; + + ret = pmic_bus_read(AXP313_CHIP_VERSION, &axp_chip_id); + if (ret) + return ret; + + axp_chip_id &= AXP313_CHIP_VERSION_MASK; + switch (axp_chip_id) { + case AXP313_CHIP_VERSION_AXP1530: + case AXP313_CHIP_VERSION_AXP313A: + case AXP313_CHIP_VERSION_AXP313B: + break; + default: + debug("unknown PMIC: 0x%x\n", axp_chip_id); + return -EINVAL; + } + + return ret; +} + +#if !CONFIG_IS_ENABLED(ARM_PSCI_FW) && !IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF) +int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) +{ + pmic_bus_write(AXP313_SHUTDOWN, AXP313_POWEROFF); + + /* infinite loop during shutdown */ + while (1) {} + + /* not reached */ + return 0; +} +#endif