Message ID | 20230615093652.23161-11-yanhong.wang@starfivetech.com |
---|---|
State | Accepted |
Commit | 38d900b409199df02a1a26dfcb464d4d2b6e27d2 |
Delegated to: | Andes |
Headers | show |
Series | Add ethernet driver for StarFive JH7110 SoC | expand |
> From: Yanhong Wang <yanhong.wang@starfivetech.com> > Sent: Thursday, June 15, 2023 5:37 PM > To: u-boot@lists.denx.de; Rick Jian-Zhi Chen(陳建志) <rick@andestech.com>; Leo Yu-Chi Liang(梁育齊) <ycliang@andestech.com>; Joe Hershberger <joe.hershberger@ni.com>; Ramon Fried <rfried.dev@gmail.com> > Cc: Yanhong Wang <yanhong.wang@starfivetech.com>; Torsten Duwe <duwe@lst.de>; Leyfoon Tan <leyfoon.tan@starfivetech.com>; samin . guo <samin.guo@starfivetech.com>; Walker Chen <walker.chen@starfivetech.com>; Hal Feng <hal.feng@starfivetech.com> > Subject: [PATCH v5 10/11] ram: starfive: Read memory size information from EEPROM > > StarFive VisionFive 2 has two versions, 1.2A and 1.3B, each version of DDR capacity includes 2G/4G/8G, a DT can not support multiple capacities, so the capacity size information is recorded to EEPROM, when DDR initialization required capacity size information is read from EEPROM. > > If there is no information in EEPROM, it is initialized with the default size defined in DT. > > Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> > --- > arch/riscv/cpu/jh7110/spl.c | 32 ++++++++++++++++++++++++++++- > drivers/ram/starfive/starfive_ddr.c | 2 -- > 2 files changed, 31 insertions(+), 3 deletions(-) > > diff --git a/arch/riscv/cpu/jh7110/spl.c b/arch/riscv/cpu/jh7110/spl.c index 104f0fe949..72adcefa0e 100644 > --- a/arch/riscv/cpu/jh7110/spl.c > +++ b/arch/riscv/cpu/jh7110/spl.c > @@ -3,19 +3,49 @@ > * Copyright (C) 2022 StarFive Technology Co., Ltd. > * Author: Yanhong Wang<yanhong.wang@starfivetech.com> > */ > - > +#include <common.h> > +#include <asm/arch/eeprom.h> > #include <asm/csr.h> > #include <asm/sections.h> > #include <dm.h> > +#include <linux/sizes.h> > #include <log.h> > +#include <init.h> > > #define CSR_U74_FEATURE_DISABLE 0x7c1 > #define L2_LIM_MEM_END 0x81FFFFFUL > > +DECLARE_GLOBAL_DATA_PTR; > + > +static bool check_ddr_size(phys_size_t size) { > + switch (size) { > + case SZ_2: > + case SZ_4: > + case SZ_8: > + case SZ_16: In commit message, it describes that "DDR capacity includes 2G/4G/8G". Is it mismatch here ? > + return true; > + default: > + return false; > + } > +} > + > int spl_soc_init(void) > { > int ret; > struct udevice *dev; > + phys_size_t size; > + > + ret = fdtdec_setup_mem_size_base(); > + if (ret) > + return ret; It maybe unnecessary to add return above. If it fail to parse memory node from DT, then there has no chance to get ddr size from eeprom. Thanks, Rick > + > + /* Read the definition of the DDR size from eeprom, and if not, > + * use the definition in DT > + */ > + size = (get_ddr_size_from_eeprom() >> 16) & 0xFF; > + if (check_ddr_size(size)) > + gd->ram_size = size << 30; > > /* DDR init */ > ret = uclass_get_device(UCLASS_RAM, 0, &dev); diff --git a/drivers/ram/starfive/starfive_ddr.c b/drivers/ram/starfive/starfive_ddr.c > index 553f2ce6f4..a0a3d6b33d 100644 > --- a/drivers/ram/starfive/starfive_ddr.c > +++ b/drivers/ram/starfive/starfive_ddr.c > @@ -72,8 +72,6 @@ static int starfive_ddr_probe(struct udevice *dev) > u64 rate; > int ret; > > - /* Read memory base and size from DT */ > - fdtdec_setup_mem_size_base(); > priv->info.base = gd->ram_base; > priv->info.size = gd->ram_size; > > -- > 2.17.1
On Thu, Jun 15, 2023 at 05:36:51PM +0800, Yanhong Wang wrote: > StarFive VisionFive 2 has two versions, 1.2A and 1.3B, each version of > DDR capacity includes 2G/4G/8G, a DT can not support multiple > capacities, so the capacity size information is recorded to EEPROM, when > DDR initialization required capacity size information is read from > EEPROM. > > If there is no information in EEPROM, it is initialized with the default > size defined in DT. > > Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> > --- > arch/riscv/cpu/jh7110/spl.c | 32 ++++++++++++++++++++++++++++- > drivers/ram/starfive/starfive_ddr.c | 2 -- > 2 files changed, 31 insertions(+), 3 deletions(-) Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
On Jun 15 2023, Yanhong Wang wrote: > StarFive VisionFive 2 has two versions, 1.2A and 1.3B, each version of > DDR capacity includes 2G/4G/8G, a DT can not support multiple > capacities, so the capacity size information is recorded to EEPROM, when > DDR initialization required capacity size information is read from > EEPROM. Does that acutally work? I see that read_eeprom fails in SPL.
On 15.06.23 11:36, Yanhong Wang wrote: > StarFive VisionFive 2 has two versions, 1.2A and 1.3B, each version of > DDR capacity includes 2G/4G/8G, a DT can not support multiple > capacities, so the capacity size information is recorded to EEPROM, when > DDR initialization required capacity size information is read from > EEPROM. > > If there is no information in EEPROM, it is initialized with the default > size defined in DT. > > Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> > Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> > --- > arch/riscv/cpu/jh7110/spl.c | 32 ++++++++++++++++++++++++++++- > drivers/ram/starfive/starfive_ddr.c | 2 -- > 2 files changed, 31 insertions(+), 3 deletions(-) > > diff --git a/arch/riscv/cpu/jh7110/spl.c b/arch/riscv/cpu/jh7110/spl.c > index 104f0fe949..72adcefa0e 100644 > --- a/arch/riscv/cpu/jh7110/spl.c > +++ b/arch/riscv/cpu/jh7110/spl.c > @@ -3,19 +3,49 @@ > * Copyright (C) 2022 StarFive Technology Co., Ltd. > * Author: Yanhong Wang<yanhong.wang@starfivetech.com> > */ > - > +#include <common.h> > +#include <asm/arch/eeprom.h> > #include <asm/csr.h> > #include <asm/sections.h> > #include <dm.h> > +#include <linux/sizes.h> > #include <log.h> > +#include <init.h> > > #define CSR_U74_FEATURE_DISABLE 0x7c1 > #define L2_LIM_MEM_END 0x81FFFFFUL > > +DECLARE_GLOBAL_DATA_PTR; > + > +static bool check_ddr_size(phys_size_t size) > +{ > + switch (size) { > + case SZ_2: > + case SZ_4: > + case SZ_8: > + case SZ_16: > + return true; > + default: > + return false; > + } > +} > + > int spl_soc_init(void) > { > int ret; > struct udevice *dev; > + phys_size_t size; > + > + ret = fdtdec_setup_mem_size_base(); > + if (ret) > + return ret; > + > + /* Read the definition of the DDR size from eeprom, and if not, > + * use the definition in DT > + */ > + size = (get_ddr_size_from_eeprom() >> 16) & 0xFF; On origin/master for a 4 GiB board with a serial number VF7110B1-2253-D004E000-4000xxxx this always fails. This results in memory reported as 8 GiB and Linux crashing. i2c_get_chip_for_busnum() returns -EINVAL in read_eeprom() [board/starfive/visionfive2/visionfive2-i2c-eeprom.c:335]. Is the driver model really expected to be fully initialized before setting up memory? Best regards Heinrich > + if (check_ddr_size(size)) > + gd->ram_size = size << 30; > > /* DDR init */ > ret = uclass_get_device(UCLASS_RAM, 0, &dev); > diff --git a/drivers/ram/starfive/starfive_ddr.c b/drivers/ram/starfive/starfive_ddr.c > index 553f2ce6f4..a0a3d6b33d 100644 > --- a/drivers/ram/starfive/starfive_ddr.c > +++ b/drivers/ram/starfive/starfive_ddr.c > @@ -72,8 +72,6 @@ static int starfive_ddr_probe(struct udevice *dev) > u64 rate; > int ret; > > - /* Read memory base and size from DT */ > - fdtdec_setup_mem_size_base(); > priv->info.base = gd->ram_base; > priv->info.size = gd->ram_size; >
On 11.10.23 04:54, Heinrich Schuchardt wrote: > On 15.06.23 11:36, Yanhong Wang wrote: >> StarFive VisionFive 2 has two versions, 1.2A and 1.3B, each version of >> DDR capacity includes 2G/4G/8G, a DT can not support multiple >> capacities, so the capacity size information is recorded to EEPROM, when >> DDR initialization required capacity size information is read from >> EEPROM. >> >> If there is no information in EEPROM, it is initialized with the default >> size defined in DT. >> >> Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> >> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> >> --- >> arch/riscv/cpu/jh7110/spl.c | 32 ++++++++++++++++++++++++++++- >> drivers/ram/starfive/starfive_ddr.c | 2 -- >> 2 files changed, 31 insertions(+), 3 deletions(-) >> >> diff --git a/arch/riscv/cpu/jh7110/spl.c b/arch/riscv/cpu/jh7110/spl.c >> index 104f0fe949..72adcefa0e 100644 >> --- a/arch/riscv/cpu/jh7110/spl.c >> +++ b/arch/riscv/cpu/jh7110/spl.c >> @@ -3,19 +3,49 @@ >> * Copyright (C) 2022 StarFive Technology Co., Ltd. >> * Author: Yanhong Wang<yanhong.wang@starfivetech.com> >> */ >> - >> +#include <common.h> >> +#include <asm/arch/eeprom.h> >> #include <asm/csr.h> >> #include <asm/sections.h> >> #include <dm.h> >> +#include <linux/sizes.h> >> #include <log.h> >> +#include <init.h> >> #define CSR_U74_FEATURE_DISABLE 0x7c1 >> #define L2_LIM_MEM_END 0x81FFFFFUL >> +DECLARE_GLOBAL_DATA_PTR; >> + >> +static bool check_ddr_size(phys_size_t size) >> +{ >> + switch (size) { >> + case SZ_2: >> + case SZ_4: >> + case SZ_8: >> + case SZ_16: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> int spl_soc_init(void) >> { >> int ret; >> struct udevice *dev; >> + phys_size_t size; >> + >> + ret = fdtdec_setup_mem_size_base(); >> + if (ret) >> + return ret; >> + >> + /* Read the definition of the DDR size from eeprom, and if not, >> + * use the definition in DT >> + */ >> + size = (get_ddr_size_from_eeprom() >> 16) & 0xFF; > > On origin/master for a 4 GiB board with a serial number > VF7110B1-2253-D004E000-4000xxxx this always fails. This results in > memory reported as 8 GiB and Linux crashing. > > i2c_get_chip_for_busnum() returns -EINVAL in read_eeprom() > [board/starfive/visionfive2/visionfive2-i2c-eeprom.c:335]. > > Is the driver model really expected to be fully initialized before > setting up memory? > > Best regards > > Heinrich The root cause seems to be in dw_i2c_calc_timing(). Probing of the i2c_designware device fails with: dw_i2c: mode 0, ic_clk 1000000, speed 100000, period 10 rise 1 fall 1 tlow 5 thigh 4 spk 0 dw_i2c: bad counts. hcnt = -4 lcnt = 4 device_probe: i2c@12050000 failed to probe -22 When I change the hcnt timing calculation, by replacing the offset of 7 to 1, the device is probed correctly and I get the correct memory size for my board. Best regards Heinrich > >> + if (check_ddr_size(size)) >> + gd->ram_size = size << 30; >> /* DDR init */ >> ret = uclass_get_device(UCLASS_RAM, 0, &dev); >> diff --git a/drivers/ram/starfive/starfive_ddr.c >> b/drivers/ram/starfive/starfive_ddr.c >> index 553f2ce6f4..a0a3d6b33d 100644 >> --- a/drivers/ram/starfive/starfive_ddr.c >> +++ b/drivers/ram/starfive/starfive_ddr.c >> @@ -72,8 +72,6 @@ static int starfive_ddr_probe(struct udevice *dev) >> u64 rate; >> int ret; >> - /* Read memory base and size from DT */ >> - fdtdec_setup_mem_size_base(); >> priv->info.base = gd->ram_base; >> priv->info.size = gd->ram_size; >
diff --git a/arch/riscv/cpu/jh7110/spl.c b/arch/riscv/cpu/jh7110/spl.c index 104f0fe949..72adcefa0e 100644 --- a/arch/riscv/cpu/jh7110/spl.c +++ b/arch/riscv/cpu/jh7110/spl.c @@ -3,19 +3,49 @@ * Copyright (C) 2022 StarFive Technology Co., Ltd. * Author: Yanhong Wang<yanhong.wang@starfivetech.com> */ - +#include <common.h> +#include <asm/arch/eeprom.h> #include <asm/csr.h> #include <asm/sections.h> #include <dm.h> +#include <linux/sizes.h> #include <log.h> +#include <init.h> #define CSR_U74_FEATURE_DISABLE 0x7c1 #define L2_LIM_MEM_END 0x81FFFFFUL +DECLARE_GLOBAL_DATA_PTR; + +static bool check_ddr_size(phys_size_t size) +{ + switch (size) { + case SZ_2: + case SZ_4: + case SZ_8: + case SZ_16: + return true; + default: + return false; + } +} + int spl_soc_init(void) { int ret; struct udevice *dev; + phys_size_t size; + + ret = fdtdec_setup_mem_size_base(); + if (ret) + return ret; + + /* Read the definition of the DDR size from eeprom, and if not, + * use the definition in DT + */ + size = (get_ddr_size_from_eeprom() >> 16) & 0xFF; + if (check_ddr_size(size)) + gd->ram_size = size << 30; /* DDR init */ ret = uclass_get_device(UCLASS_RAM, 0, &dev); diff --git a/drivers/ram/starfive/starfive_ddr.c b/drivers/ram/starfive/starfive_ddr.c index 553f2ce6f4..a0a3d6b33d 100644 --- a/drivers/ram/starfive/starfive_ddr.c +++ b/drivers/ram/starfive/starfive_ddr.c @@ -72,8 +72,6 @@ static int starfive_ddr_probe(struct udevice *dev) u64 rate; int ret; - /* Read memory base and size from DT */ - fdtdec_setup_mem_size_base(); priv->info.base = gd->ram_base; priv->info.size = gd->ram_size;
StarFive VisionFive 2 has two versions, 1.2A and 1.3B, each version of DDR capacity includes 2G/4G/8G, a DT can not support multiple capacities, so the capacity size information is recorded to EEPROM, when DDR initialization required capacity size information is read from EEPROM. If there is no information in EEPROM, it is initialized with the default size defined in DT. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> --- arch/riscv/cpu/jh7110/spl.c | 32 ++++++++++++++++++++++++++++- drivers/ram/starfive/starfive_ddr.c | 2 -- 2 files changed, 31 insertions(+), 3 deletions(-)