@@ -60,7 +60,7 @@ Now build the U-Boot SPL and U-Boot proper
.. code-block:: console
cd <U-Boot-dir>
- make starfive_visionfive2_13b_defconfig
+ make starfive_visionfive2_defconfig
make OPENSBI=$(opensbi_dir)/opensbi/build/platform/generic/firmware/fw_dynamic.bin
This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb)
@@ -111,7 +111,7 @@ Program the SD card
sudo cp u-boot.itb /mnt/
sudo cp Image.gz /mnt/
sudo cp initramfs.cpio.gz /mnt/
- sudo cp jh7110-starfive-visionfive-2-v1.3b.dtb /mnt/
+ sudo cp jh7110-starfive-visionfive-2.dtb /mnt/
sudo umount /mnt
Booting
@@ -255,7 +255,7 @@ Sample boot log from StarFive VisionFive2 board
StarFive #fatload mmc 1:3 ${kernel_addr_r} Image.gz
6429424 bytes read in 394 ms (15.6 MiB/s)
- StarFive #fatload mmc 1:3 ${fdt_addr_r} jh7110-starfive-visionfive-2-v1.3b.dtb
+ StarFive #fatload mmc 1:3 ${fdt_addr_r} jh7110-starfive-visionfive-2.dtb
11285 bytes read in 5 ms (2.2 MiB/s)
StarFive #fatload mmc 1:3 ${ramdisk_addr_r} initramfs.cpio.gz
152848495 bytes read in 9271 ms (15.7 MiB/s)
The defconfig file name for StarFive VisionFive2 has been changed, and the documentation description has also changed. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> --- doc/board/starfive/visionfive2.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)