@@ -229,3 +229,32 @@ Image formats:
| | SPL DTB 1...N | |
| +-------------------+ |
+-----------------------+
+
+Switch Setting for Boot Mode
+----------------------------
+
+Boot Mode pins provide means to select the boot mode and options before the
+device is powered up. After every POR, they are the main source to populate
+the Boot Parameter Tables.
+
+The following table shows some common boot modes used on AM62 platform. More
+details can be found in the Technical Reference Manual:
+https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section.
+
+*Boot Modes*
+
++----------------+-----------------+-----------------+
+| Switch Label | SW2: 12345678 | SW3: 12345678 |
++================+=================+=================+
+| SD | 01000000 | 11000010 |
++----------------+-----------------+-----------------+
+| OSPI | 00000000 | 11001110 |
++----------------+-----------------+-----------------+
+| EMMC | 00000000 | 11010010 |
++----------------+-----------------+-----------------+
+| UART | 00000000 | 11011100 |
++----------------+-----------------+-----------------+
+| USB DFU | 00000000 | 11001010 |
++----------------+-----------------+-----------------+
+
+For SW2 and SW1, the switch state in the "ON" position = 1.
List some common boot modes and their corresponding switch settings for AM62 SK. List in a ASCII-style table. Signed-off-by: Judith Mendez <jm@ti.com> --- Changes from v1: Change table format from ascii-art to list-table Changes from v2: Change table format to ASCII style doc/board/ti/am62x_sk.rst | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)