diff mbox series

configs: Enable ATF support for QSPI & NAND boot

Message ID 20221121134158.6678-1-jit.loon.lim@intel.com
State Needs Review / ACK, archived
Delegated to: Marek Vasut
Headers show
Series configs: Enable ATF support for QSPI & NAND boot | expand

Commit Message

Jit Loon Lim Nov. 21, 2022, 1:41 p.m. UTC 
From: Chee Hong Ang <chee.hong.ang@intel.com>

HSD #1508277418: Add defconfigs with ATF support for QSPI and NAND boot on
Stratix10 and Agilex platforms.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
---
 configs/socfpga_agilex_nand_atf_defconfig    | 88 +++++++++++++++++++
 configs/socfpga_agilex_qspi_atf_defconfig    | 76 +++++++++++++++++
 configs/socfpga_stratix10_nand_atf_defconfig | 90 ++++++++++++++++++++
 configs/socfpga_stratix10_qspi_atf_defconfig | 77 +++++++++++++++++
 include/configs/socfpga_soc64_common.h       | 22 +++++
 5 files changed, 353 insertions(+)
 create mode 100755 configs/socfpga_agilex_nand_atf_defconfig
 create mode 100755 configs/socfpga_agilex_qspi_atf_defconfig
 create mode 100755 configs/socfpga_stratix10_nand_atf_defconfig
 create mode 100755 configs/socfpga_stratix10_qspi_atf_defconfig
diff mbox series

Patch

diff --git a/configs/socfpga_agilex_nand_atf_defconfig b/configs/socfpga_agilex_nand_atf_defconfig
new file mode 100755
index 0000000000..a3b272d771
--- /dev/null
+++ b/configs/socfpga_agilex_nand_atf_defconfig
@@ -0,0 +1,88 @@ 
+CONFIG_ARM=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_TEXT_BASE=0x200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x00200000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0xffe00000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
+CONFIG_IDENT_STRING="socfpga_agilex"
+CONFIG_SPL_FS_FAT=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk_nand"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon panic=-1"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run nandload; run linux_qspi_enable; run nandboot"
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_CACHE=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # "
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nand0=ffb90000.nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=ffb90000.nand.0:2m(u-boot),256k(env),256k(dtb),32m(kernel),32m(misc),-(rootfs)"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_ALTERA_SDRAM=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_NAND_DENALI_DT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x0
+CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x100000
+CONFIG_SPL_NAND_FRAMEWORK=y
+CONFIG_SF_DEFAULT_MODE=0x2003
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
\ No newline at end of file
diff --git a/configs/socfpga_agilex_qspi_atf_defconfig b/configs/socfpga_agilex_qspi_atf_defconfig
new file mode 100755
index 0000000000..8956abae36
--- /dev/null
+++ b/configs/socfpga_agilex_qspi_atf_defconfig
@@ -0,0 +1,76 @@ 
+CONFIG_ARM=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_TEXT_BASE=0x200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x020C0000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0xFFE00000
+CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
+CONFIG_IDENT_STRING="socfpga_agilex"
+CONFIG_SPL_FS_FAT=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk_qspi"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon panic=-1"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="sf probe;run qspiload;run linux_qspi_enable;rsu dtb;run qspiboot"
+CONFIG_SPL_CACHE=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # "
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_BLK=y
+CONFIG_SPL_ALTERA_SDRAM=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_SF_DEFAULT_MODE=0x2003
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+CONFIG_PANIC_HANG=y
\ No newline at end of file
diff --git a/configs/socfpga_stratix10_nand_atf_defconfig b/configs/socfpga_stratix10_nand_atf_defconfig
new file mode 100755
index 0000000000..cbb3f88ec2
--- /dev/null
+++ b/configs/socfpga_stratix10_nand_atf_defconfig
@@ -0,0 +1,90 @@ 
+CONFIG_ARM=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_TEXT_BASE=0x200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x00200000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0xFFE00000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y
+CONFIG_IDENT_STRING="socfpga_stratix10"
+CONFIG_SPL_FS_FAT=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk_nand"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon panic=-1"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run nandload; run linux_qspi_enable; rsu dtb; run nandboot"
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # "
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nand0=ffb90000.nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=ffb90000.nand.0:2m(u-boot),256k(env),256k(dtb),32m(kernel),32m(misc),-(rootfs)"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_ALTERA_SDRAM=y
+CONFIG_FPGA_INTEL_PR=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_NAND_DENALI_DT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x0
+CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x100000
+CONFIG_SPL_NAND_FRAMEWORK=y
+CONFIG_SF_DEFAULT_MODE=0x2003
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+CONFIG_PANIC_HANG=y
\ No newline at end of file
diff --git a/configs/socfpga_stratix10_qspi_atf_defconfig b/configs/socfpga_stratix10_qspi_atf_defconfig
new file mode 100755
index 0000000000..16ee4896d0
--- /dev/null
+++ b/configs/socfpga_stratix10_qspi_atf_defconfig
@@ -0,0 +1,77 @@ 
+CONFIG_ARM=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_TEXT_BASE=0x200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x020C0000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0xFFE00000
+CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y
+CONFIG_IDENT_STRING="socfpga_stratix10"
+CONFIG_SPL_FS_FAT=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk_qspi"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon panic=-1"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="sf probe;run qspiload;run linux_qspi_enable;rsu dtb;run qspiboot"
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # "
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_BLK=y
+CONFIG_SPL_ALTERA_SDRAM=y
+CONFIG_FPGA_INTEL_PR=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_SF_DEFAULT_MODE=0x2003
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+CONFIG_PANIC_HANG=y
\ No newline at end of file
diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h
index 06198ddd82..8a9f4dc4c9 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -33,10 +33,32 @@ 
  * U-Boot environment configurations
  */
 
+ /*
+ * NAND support
+ */
+#ifdef CONFIG_NAND_DENALI
+#ifndef CONFIG_SPL_FIT
+#define CONFIG_SPL_NAND_RAW_ONLY
+#endif
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(1 * 1024 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
+#endif /* CONFIG_NAND_DENALI */
+
 /*
  * Environment variable
  */
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"qspibootimageaddr=0x020E0000\0" \
+	"qspifdtaddr=0x020D0000\0" \
+	"bootimagesize=0x01F00000\0" \
+	"fdtimagesize=0x00010000\0" \
+	"qspiload=sf read ${loadaddr} ${qspibootimageaddr} ${bootimagesize};" \
+		"sf read ${fdt_addr} ${qspifdtaddr} ${fdtimagesize}\0" \
+	"qspiboot=setenv bootargs earlycon root=/dev/mtdblock1 rw " \
+		"rootfstype=jffs2 rootwait;booti ${loadaddr} - ${fdt_addr}\0" \
 	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"bootfile=" CONFIG_BOOTFILE "\0" \
 	"fdt_addr=8000000\0" \