@@ -326,6 +326,13 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
u16 column = 0;
int ret;
+ /*
+ * Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
+ * the cache content to 0xFF (depends on vendor implementation), so we
+ * must fill the page cache entirely even if we only want to program
+ * the data portion of the page, otherwise we might corrupt the BBM or
+ * user data previously programmed in OOB area.
+ */
memset(spinand->databuf, 0xff,
nanddev_page_size(nand) +
nanddev_per_page_oobsize(nand));
@@ -598,12 +605,12 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from,
if (ret == -EBADMSG) {
ecc_failed = true;
mtd->ecc_stats.failed++;
- ret = 0;
} else {
mtd->ecc_stats.corrected += ret;
max_bitflips = max_t(unsigned int, max_bitflips, ret);
}
+ ret = 0;
ops->retlen += iter.req.datalen;
ops->oobretlen += iter.req.ooblen;
}
@@ -669,16 +676,9 @@ static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos)
.oobbuf.in = marker,
.mode = MTD_OPS_RAW,
};
- int ret;
-
- ret = spinand_select_target(spinand, pos->target);
- if (ret)
- return ret;
-
- ret = spinand_read_page(spinand, &req, false);
- if (ret)
- return ret;
+ spinand_select_target(spinand, pos->target);
+ spinand_read_page(spinand, &req, false);
if (marker[0] != 0xff || marker[1] != 0xff)
return true;
@@ -722,6 +722,10 @@ static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
if (ret)
return ret;
+ ret = spinand_write_enable_op(spinand);
+ if (ret)
+ return ret;
+
return spinand_write_page(spinand, &req);
}