@@ -63,6 +63,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="kernel.itb"
@@ -57,6 +57,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="Image"
similarity index 51%
copy from configs/socfpga_agilex_defconfig
copy to configs/socfpga_agilex_qspi_defconfig
@@ -1,52 +1,36 @@
CONFIG_ARM=y
-CONFIG_COUNTER_FREQUENCY=400000000
+CONFIG_ARM_SMCCC=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
CONFIG_ARCH_SOCFPGA=y
CONFIG_SYS_TEXT_BASE=0x1000
-CONFIG_SYS_MALLOC_LEN=0x500000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0x200
+CONFIG_ENV_OFFSET=0x02080000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk"
CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
CONFIG_IDENT_STRING="socfpga_agilex"
CONFIG_SPL_FS_FAT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
# CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x02000000
-CONFIG_SYS_MEMTEST_START=0x00000000
-CONFIG_SYS_MEMTEST_END=0x3fe00000
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x101000
-CONFIG_REMAKE_ELF=y
+CONFIG_ARMV8_PSCI=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk_qspi"
+CONFIG_QSPI_BOOT=y
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="earlycon"
+CONFIG_BOOTARGS="earlycon panic=-1"
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run fatscript; run mmcload; run linux_qspi_enable; run mmcboot"
-CONFIG_SPL_MAX_SIZE=0x40000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x3ff00000
-CONFIG_SPL_BSS_MAX_SIZE=0x100000
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0xffe3f000
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x500000
+CONFIG_BOOTCOMMAND="sf probe;run qspiload;run linux_qspi_enable;rsu dtb;run qspiboot"
CONFIG_SPL_CACHE=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x3c00000
-CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex"
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # "
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=2082
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
@@ -57,16 +41,17 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="Image"
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_BLK=y
CONFIG_SPL_ALTERA_SDRAM=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DW=y
-CONFIG_MMC_DW=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
CONFIG_SF_DEFAULT_MODE=0x2003
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
@@ -80,9 +65,8 @@ CONFIG_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_STORAGE=y
-CONFIG_DESIGNWARE_WATCHDOG=y
-CONFIG_WDT=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
-CONFIG_PANIC_HANG=y
+CONFIG_PANIC_HANG=y
\ No newline at end of file
@@ -53,6 +53,7 @@
"bootm ${loadaddr}\0" \
"mmcfitload=mmc rescan;" \
"load mmc 0:1 ${loadaddr} ${bootfile}\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"linux_qspi_enable=if sf probe; then " \
"echo Enabling QSPI at Linux DTB...;" \
"fdt addr ${fdt_addr}; fdt resize;" \