Message ID | 20220817130714.3487965-3-pro@denx.de |
---|---|
State | Accepted |
Commit | b6664eace8a26f0850ffa0a3e349ca2ffa960f2a |
Delegated to: | Tom Rini |
Headers | show |
Series | ARM: imx6: dh-imx6: Enable d-cache early in SPL | expand |
On Wed, Aug 17, 2022 at 03:07:13PM +0200, Philip Oberfichtner wrote: > Introduce the new Kconfig symbol CONFIG_SPL_SYS_L2_PL310 to allow the > SPL to build cache-pl310.c. > > Before this commit, the SPL could enable the PL310 L2 cache [1], but the > cache maintenance functions from cache-pl310.c were only useable for > non-SPL builds. > > After enabling the cache one must be able to flush it, too. Thus this > commit allows cache-pl310.c to be included in the SPL build. > > [1] See for example arch/arm/mach-imx/cache.c: v7_outer_cache_enable() > > Signed-off-by: Philip Oberfichtner <pro@denx.de> Applied to u-boot/next, thanks!
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b094d2d51f..318e5e82ea 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -493,6 +493,11 @@ config SYS_L2_PL310 help Enable support for ARM PL310 L2 cache controller in U-Boot +config SPL_SYS_L2_PL310 + bool "ARM PL310 L2 cache controller in SPL" + help + Enable support for ARM PL310 L2 cache controller in SPL + config SYS_L2CACHE_OFF bool "L2cache off" help diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index c603fe61bc..d137b4bf0f 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o -obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o else obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o obj-$(CONFIG_SPL_FRAMEWORK) += zimage.o @@ -46,6 +45,7 @@ else obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o endif +obj-$(CONFIG_$(SPL_TPL_)SYS_L2_PL310) += cache-pl310.o obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o ifneq ($(filter y,$(CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR) $(CONFIG_SAVE_PREV_BL_FDT_ADDR)),)
Introduce the new Kconfig symbol CONFIG_SPL_SYS_L2_PL310 to allow the SPL to build cache-pl310.c. Before this commit, the SPL could enable the PL310 L2 cache [1], but the cache maintenance functions from cache-pl310.c were only useable for non-SPL builds. After enabling the cache one must be able to flush it, too. Thus this commit allows cache-pl310.c to be included in the SPL build. [1] See for example arch/arm/mach-imx/cache.c: v7_outer_cache_enable() Signed-off-by: Philip Oberfichtner <pro@denx.de> --- (no changes since v3) Changes in v3: - Introduce CONFIG_SPL_SYS_L2_PL310 arch/arm/Kconfig | 5 +++++ arch/arm/lib/Makefile | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)