Message ID | 20220715153655.955874-5-foss+uboot@0leil.net |
---|---|
State | RFC |
Delegated to: | Kever Yang |
Headers | show |
Series | migrate u-boot-rockchip.bin to binman and generate an image for SPI | expand |
On Fri, 15 Jul 2022 at 17:37, Quentin Schulz <foss+uboot@0leil.net> wrote: > > From: Quentin Schulz <quentin.schulz@theobroma-systems.com> > > On MMC storage media, the TPL/SPL needs to be flashed at offset 32KB. > Instead of requesting the user to put the input the appropriate offsets, > let's create u-boot-rockchip.bin with the padding already added. NAK. The storage layout provided by Rockchip leaves space for a (protective) MBR and a primary GPT. A bootloader update will overwrite the partition table if you create the image as you suggest. > Cc: Quentin Schulz <foss+uboot@0leil.net> > Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> > --- > arch/arm/dts/rockchip-u-boot.dtsi | 3 ++- > doc/board/rockchip/rockchip.rst | 2 +- > 2 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi > index fc28ce5187..4cd243514e 100644 > --- a/arch/arm/dts/rockchip-u-boot.dtsi > +++ b/arch/arm/dts/rockchip-u-boot.dtsi > @@ -18,6 +18,7 @@ > pad-byte = <0xff>; > > mkimage { > + offset = <(32 * 1024)>; /* 32KB */ > args = "-n", CONFIG_SYS_SOC, "-T", "rksd"; > #ifndef CONFIG_TPL > u-boot-spl { > @@ -38,7 +39,7 @@ > #else > u-boot-img { > #endif > - offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>; > + offset = <(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)>; > }; > }; > }; > diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst > index 4ca7b00b1f..1995882244 100644 > --- a/doc/board/rockchip/rockchip.rst > +++ b/doc/board/rockchip/rockchip.rst > @@ -179,7 +179,7 @@ To write an image that boots from a SD card (assumed to be /dev/sda): > > .. code-block:: bash > > - sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 > + sudo dd if=u-boot-rockchip.bin of=/dev/sda > sync > > eMMC > -- > 2.36.1 >
Hi Philipp, On 7/15/22 18:06, Philipp Tomsich wrote: > On Fri, 15 Jul 2022 at 17:37, Quentin Schulz <foss+uboot@0leil.net> wrote: >> >> From: Quentin Schulz <quentin.schulz@theobroma-systems.com> >> >> On MMC storage media, the TPL/SPL needs to be flashed at offset 32KB. >> Instead of requesting the user to put the input the appropriate offsets, >> let's create u-boot-rockchip.bin with the padding already added. > > NAK. > > The storage layout provided by Rockchip leaves space for a > (protective) MBR and a primary GPT. > A bootloader update will overwrite the partition table if you create > the image as you suggest. > Ah, that was what I was missing. Thanks, makes complete sense! Cheers, Quentin
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi index fc28ce5187..4cd243514e 100644 --- a/arch/arm/dts/rockchip-u-boot.dtsi +++ b/arch/arm/dts/rockchip-u-boot.dtsi @@ -18,6 +18,7 @@ pad-byte = <0xff>; mkimage { + offset = <(32 * 1024)>; /* 32KB */ args = "-n", CONFIG_SYS_SOC, "-T", "rksd"; #ifndef CONFIG_TPL u-boot-spl { @@ -38,7 +39,7 @@ #else u-boot-img { #endif - offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>; + offset = <(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)>; }; }; }; diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 4ca7b00b1f..1995882244 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -179,7 +179,7 @@ To write an image that boots from a SD card (assumed to be /dev/sda): .. code-block:: bash - sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 + sudo dd if=u-boot-rockchip.bin of=/dev/sda sync eMMC