diff mbox series

[v2,4/8] ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header

Message ID 20220520084626.656293-5-pro@denx.de
State Accepted
Commit 6ecd1d66a92d53e624c73f92d092a7220961be4c
Delegated to: Stefano Babic
Headers show
Series ARM: imx: Add support for iMX6QDL DHCOM DRC02 and DH picoITX | expand

Commit Message

Philip Oberfichtner May 20, 2022, 8:46 a.m. UTC 
Use phy address from device tree instead of CONFIG_FEC_MXC_PHYADDR from
board header. This is required, because the DH picoITX and DRC02 boards
require different settings than PDK2. The corresponding 'phy-handle'
device tree properties are already there.

I tested this change on picoITX and DRC02, but on PDK2 it is untested.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Philip Oberfichtner <pro@denx.de>
---

(no changes since v1)

 include/configs/dh_imx6.h | 3 ---
 1 file changed, 3 deletions(-)

Comments

Stefano Babic May 20, 2022, 1:40 p.m. UTC | #1 
> Use phy address from device tree instead of CONFIG_FEC_MXC_PHYADDR from
> board header. This is required, because the DH picoITX and DRC02 boards
> require different settings than PDK2. The corresponding 'phy-handle'
> device tree properties are already there.
> I tested this change on picoITX and DRC02, but on PDK2 it is untested.
> Reviewed-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Philip Oberfichtner <pro@denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 2b14464dff..178f5a6e7d 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -30,9 +30,6 @@ 
 /* Bootcounter */
 #define CONFIG_SYS_BOOTCOUNT_BE
 
-/* FEC ethernet */
-#define CONFIG_FEC_MXC_PHYADDR		7
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	3