diff --git a/arch/arm/dts/imx8mm-venice-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-u-boot.dtsi
index 42b2903f0409..c61c6de935fb 100644
--- a/arch/arm/dts/imx8mm-venice-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-venice-u-boot.dtsi
@@ -57,6 +57,10 @@
 	u-boot,dm-spl;
 };
 
+&gsc {
+	u-boot,dm-spl;
+};
+
 &i2c2 {
 	u-boot,dm-spl;
 };
diff --git a/arch/arm/dts/imx8mm-venice.dts b/arch/arm/dts/imx8mm-venice.dts
index 54505a03c6fa..39b030691e53 100644
--- a/arch/arm/dts/imx8mm-venice.dts
+++ b/arch/arm/dts/imx8mm-venice.dts
@@ -27,6 +27,13 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c02";
 		reg = <0x51>;
diff --git a/arch/arm/dts/imx8mn-venice-u-boot.dtsi b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
index 055406e77b30..4f23da356763 100644
--- a/arch/arm/dts/imx8mn-venice-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
@@ -94,6 +94,10 @@
 	u-boot,dm-spl;
 };
 
+&gsc {
+	u-boot,dm-spl;
+};
+
 &i2c2 {
 	u-boot,dm-spl;
 };
diff --git a/arch/arm/dts/imx8mn-venice.dts b/arch/arm/dts/imx8mn-venice.dts
index e906a560581d..eeae225632d7 100644
--- a/arch/arm/dts/imx8mn-venice.dts
+++ b/arch/arm/dts/imx8mn-venice.dts
@@ -27,6 +27,13 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c02";
 		reg = <0x51>;
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 55db25062a9b..1abf52611232 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -97,6 +97,8 @@ config TARGET_IMX8MM_VENICE
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
+	select GATEWORKS_SC
+	select MISC
 
 config TARGET_KONTRON_MX8MM
 	bool "Kontron Electronics N80xx"
@@ -143,6 +145,8 @@ config TARGET_IMX8MN_VENICE
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
+	select GATEWORKS_SC
+	select MISC
 
 config TARGET_IMX8MP_EVK
 	bool "imx8mp LPDDR4 EVK board"
diff --git a/board/gateworks/venice/Makefile b/board/gateworks/venice/Makefile
index b8b53fdc0e80..fbb716ee852d 100644
--- a/board/gateworks/venice/Makefile
+++ b/board/gateworks/venice/Makefile
@@ -4,7 +4,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 #
 
-obj-y += venice.o gsc.o
+obj-y += venice.o eeprom.o
 
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
diff --git a/board/gateworks/venice/eeprom.c b/board/gateworks/venice/eeprom.c
new file mode 100644
index 000000000000..62b8125960c7
--- /dev/null
+++ b/board/gateworks/venice/eeprom.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+#include <common.h>
+#include <gsc.h>
+#include <hexdump.h>
+#include <i2c.h>
+#include <dm/uclass.h>
+
+#include "eeprom.h"
+
+/* I2C */
+#define SOM_EEPROM_BUSNO		0
+#define SOM_EEPROM_ADDR			0x51
+#define BASEBOARD_EEPROM_BUSNO		1
+#define BASEBOARD_EEPROM_ADDR		0x52
+
+struct venice_board_info som_info;
+struct venice_board_info base_info;
+char venice_model[32];
+u32 venice_serial;
+
+/* return a mac address from EEPROM info */
+int eeprom_getmac(int index, uint8_t *address)
+{
+	int i, j;
+	u32 maclow, machigh;
+	u64 mac;
+
+	j = 0;
+	if (som_info.macno) {
+		maclow = som_info.mac[5];
+		maclow |= som_info.mac[4] << 8;
+		maclow |= som_info.mac[3] << 16;
+		maclow |= som_info.mac[2] << 24;
+		machigh = som_info.mac[1];
+		machigh |= som_info.mac[0] << 8;
+		mac = machigh;
+		mac <<= 32;
+		mac |= maclow;
+		for (i = 0; i < som_info.macno; i++, j++) {
+			if (index == j)
+				goto out;
+		}
+	}
+
+	maclow = base_info.mac[5];
+	maclow |= base_info.mac[4] << 8;
+	maclow |= base_info.mac[3] << 16;
+	maclow |= base_info.mac[2] << 24;
+	machigh = base_info.mac[1];
+	machigh |= base_info.mac[0] << 8;
+	mac = machigh;
+	mac <<= 32;
+	mac |= maclow;
+	for (i = 0; i < base_info.macno; i++, j++) {
+		if (index == j)
+			goto out;
+	}
+
+	return -EINVAL;
+
+out:
+	mac += i;
+	address[0] = (mac >> 40) & 0xff;
+	address[1] = (mac >> 32) & 0xff;
+	address[2] = (mac >> 24) & 0xff;
+	address[3] = (mac >> 16) & 0xff;
+	address[4] = (mac >> 8) & 0xff;
+	address[5] = (mac >> 0) & 0xff;
+
+	return 0;
+}
+
+static int eeprom_read(int busno, int slave, int alen, struct venice_board_info *info)
+{
+	int i;
+	int chksum;
+	unsigned char *buf = (unsigned char *)info;
+	struct udevice *dev, *bus;
+	int ret;
+
+	/* probe device */
+	ret = uclass_get_device_by_seq(UCLASS_I2C, busno, &bus);
+	if (ret)
+		return ret;
+	ret = dm_i2c_probe(bus, slave, 0, &dev);
+	if (ret)
+		return ret;
+
+	/* read eeprom config section */
+	memset(info, 0, sizeof(*info));
+	ret = i2c_set_chip_offset_len(dev, alen);
+	if (ret) {
+		puts("EEPROM: Failed to set alen\n");
+		return ret;
+	}
+	ret = dm_i2c_read(dev, 0x00, buf, sizeof(*info));
+	if (ret) {
+		if (slave == SOM_EEPROM_ADDR)
+			printf("EEPROM: Failed to read EEPROM\n");
+		return ret;
+	}
+
+	/* validate checksum */
+	for (chksum = 0, i = 0; i < (int)sizeof(*info) - 2; i++)
+		chksum += buf[i];
+	if ((info->chksum[0] != chksum >> 8) ||
+	    (info->chksum[1] != (chksum & 0xff))) {
+		printf("EEPROM: I2C%d@0x%02x: Invalid Checksum\n", busno, slave);
+		print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info));
+		memset(info, 0, sizeof(*info));
+		return -EINVAL;
+	}
+
+	/* sanity check valid model */
+	if (info->model[0] != 'G' || info->model[1] != 'W') {
+		printf("EEPROM: I2C%d@0x%02x: Invalid Model in EEPROM\n", busno, slave);
+		print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info));
+		memset(info, 0, sizeof(*info));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* determine BOM revision from model */
+int get_bom_rev(const char *str)
+{
+	int  rev_bom = 0;
+	int i;
+
+	for (i = strlen(str) - 1; i > 0; i--) {
+		if (str[i] == '-')
+			break;
+		if (str[i] >= '1' && str[i] <= '9') {
+			rev_bom = str[i] - '0';
+			break;
+		}
+	}
+	return rev_bom;
+}
+
+/* determine PCB revision from model */
+char get_pcb_rev(const char *str)
+{
+	char rev_pcb = 'A';
+	int i;
+
+	for (i = strlen(str) - 1; i > 0; i--) {
+		if (str[i] == '-')
+			break;
+		if (str[i] >= 'A') {
+			rev_pcb = str[i];
+			break;
+		}
+	}
+	return rev_pcb;
+}
+
+/*
+ * get dt name based on model and detail level:
+ *
+ * For boards that are a combination of a SoM plus a Baseboard:
+ *   Venice SoM part numbers are GW70xx where xx is:
+ *    7000-7019: same PCB with som dt of '0x'
+ *    7020-7039: same PCB with som dt of '2x'
+ *    7040-7059: same PCB with som dt of '4x'
+ *    7060-7079: same PCB with som dt of '6x'
+ *    7080-7099: same PCB with som dt of '8x'
+ *   Venice Baseboard part numbers are GW7xxx where xxx is:
+ *    7100-7199: same PCB with base dt of '71xx'
+ *    7200-7299: same PCB with base dt of '72xx'
+ *    7300-7399: same PCB with base dt of '73xx'
+ *    7400-7499: same PCB with base dt of '74xx'
+ *    7500-7599: same PCB with base dt of '75xx'
+ *    7600-7699: same PCB with base dt of '76xx'
+ *    7700-7799: same PCB with base dt of '77xx'
+ *    7800-7899: same PCB with base dt of '78xx'
+ *   DT name is comprised of:
+ *    gw<base dt>-<som dt>-[base-pcb-rev][base-bom-rev][som-pcb-rev][som-bom-rev]
+ *
+ * For board models from 7900-7999 each PCB is unique with its own dt:
+ *   DT name is comprised:
+ *    gw<model>-[pcb-rev][bom-rev]
+ *
+ */
+#define snprintfcat(dest, sz, fmt, ...) \
+	snprintf((dest) + strlen(dest), (sz) - strlen(dest), fmt, ##__VA_ARGS__)
+const char *eeprom_get_dtb_name(int level, char *buf, int sz)
+{
+#ifdef CONFIG_IMX8MM
+	const char *pre = "imx8mm-venice-gw";
+#else
+	const char *pre = "imx8mn-venice-gw";
+#endif
+	int model, rev_pcb, rev_bom;
+
+	model = ((som_info.model[2] - '0') * 1000)
+		+ ((som_info.model[3] - '0') * 100)
+		+ ((som_info.model[4] - '0') * 10)
+		+ (som_info.model[5] - '0');
+	rev_pcb = tolower(get_pcb_rev(som_info.model));
+	rev_bom = get_bom_rev(som_info.model);
+
+	/* som + baseboard*/
+	if (base_info.model[0]) {
+		/* baseboard id: 7100-7199->71; 7200-7299->72; etc */
+		int base = ((base_info.model[2] - '0') * 10) + (base_info.model[3] - '0');
+		/* som id: 7000-7019->1; 7020-7039->2; etc */
+		int som = ((model % 100) / 20) * 2;
+		int rev_base_pcb = tolower(get_pcb_rev(base_info.model));
+		int rev_base_bom = get_bom_rev(base_info.model);
+
+		snprintf(buf, sz, "%s%2dxx-%dx", pre, base, som);
+		switch (level) {
+		case 0: /* full model (ie gw73xx-0x-a1a1) */
+			if (rev_base_bom)
+				snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom);
+			else
+				snprintfcat(buf, sz, "-%c", rev_base_pcb);
+			if (rev_bom)
+				snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom);
+			else
+				snprintfcat(buf, sz, "%c", rev_pcb);
+			break;
+		case 1: /* don't care about SoM revision */
+			if (rev_base_bom)
+				snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom);
+			else
+				snprintfcat(buf, sz, "-%c", rev_base_pcb);
+			snprintfcat(buf, sz, "xx");
+			break;
+		case 2: /* don't care about baseboard revision */
+			snprintfcat(buf, sz, "-xx");
+			if (rev_bom)
+				snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom);
+			else
+				snprintfcat(buf, sz, "%c", rev_pcb);
+			break;
+		case 3: /* don't care about SoM/baseboard revision */
+			break;
+		default:
+			return NULL;
+		}
+	} else {
+		snprintf(buf, sz, "%s%04d", pre, model);
+		switch (level) {
+		case 0: /* full model wth PCB and BOM revision first (ie gw7901-a1) */
+			if (rev_bom)
+				snprintfcat(buf, sz, "-%c%d", rev_pcb, rev_bom);
+			else
+				snprintfcat(buf, sz, "-%c", rev_pcb);
+			break;
+		case 1: /* don't care about BOM revision */
+			snprintfcat(buf, sz, "-%c", rev_pcb);
+			break;
+		case 2: /* don't care about PCB or BOM revision */
+			break;
+		default:
+			return NULL;
+		}
+	}
+
+	return buf;
+}
+
+static int eeprom_info(bool verbose)
+{
+	printf("Model   : %s\n", venice_model);
+	printf("Serial  : %d\n", som_info.serial);
+	printf("MFGDate : %02x-%02x-%02x%02x\n",
+	       som_info.mfgdate[0], som_info.mfgdate[1],
+	       som_info.mfgdate[2], som_info.mfgdate[3]);
+	if (base_info.model[0] && verbose) {
+		printf("SOM     : %s %d %02x-%02x-%02x%02x\n",
+		       som_info.model, som_info.serial,
+		       som_info.mfgdate[0], som_info.mfgdate[1],
+		       som_info.mfgdate[2], som_info.mfgdate[3]);
+		printf("BASE    : %s %d %02x-%02x-%02x%02x\n",
+		       base_info.model, base_info.serial,
+		       base_info.mfgdate[0], base_info.mfgdate[1],
+		       base_info.mfgdate[2], base_info.mfgdate[3]);
+	}
+
+	return 0;
+}
+
+int eeprom_init(int quiet)
+{
+	char rev_pcb;
+	int rev_bom;
+	int ret;
+
+	ret = eeprom_read(SOM_EEPROM_BUSNO, SOM_EEPROM_ADDR, 1, &som_info);
+	if (ret) {
+		puts("ERROR: Failed to probe EEPROM\n");
+		memset(&som_info, 0, sizeof(som_info));
+		return 0;
+	}
+
+	/* read optional baseboard EEPROM */
+	eeprom_read(BASEBOARD_EEPROM_BUSNO, BASEBOARD_EEPROM_ADDR, 2, &base_info);
+
+	/* create model strings */
+	if (base_info.model[0]) {
+		sprintf(venice_model, "GW%c%c%c%c-%c%c-",
+			som_info.model[2], /* family */
+			base_info.model[3], /* baseboard */
+			base_info.model[4], base_info.model[5], /* subload of baseboard */
+			som_info.model[4], som_info.model[5]); /* last 2digits of SOM */
+
+		/* baseboard revision */
+		rev_pcb = get_pcb_rev(base_info.model);
+		rev_bom = get_bom_rev(base_info.model);
+		if (rev_bom)
+			sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom);
+		else
+			sprintf(venice_model + strlen(venice_model), "%c", rev_pcb);
+		/* som revision */
+		rev_pcb = get_pcb_rev(som_info.model);
+		rev_bom = get_bom_rev(som_info.model);
+		if (rev_bom)
+			sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom);
+		else
+			sprintf(venice_model + strlen(venice_model), "%c", rev_pcb);
+	} else {
+		strcpy(venice_model, som_info.model);
+	}
+	venice_serial = som_info.serial;
+
+	if (!quiet)
+		eeprom_info(false);
+
+	return (16 << som_info.sdram_size);
+}
+
+void board_gsc_info(void)
+{
+	eeprom_info(true);
+}
+
+const char *eeprom_get_model(void)
+{
+	return venice_model;
+}
+
+u32 eeprom_get_serial(void)
+{
+	return venice_serial;
+}
diff --git a/board/gateworks/venice/gsc.h b/board/gateworks/venice/eeprom.h
similarity index 55%
rename from board/gateworks/venice/gsc.h
rename to board/gateworks/venice/eeprom.h
index b391b2e32684..37bfe76ad81e 100644
--- a/board/gateworks/venice/gsc.h
+++ b/board/gateworks/venice/eeprom.h
@@ -3,19 +3,8 @@
  * Copyright 2021 Gateworks Corporation
  */
 
-#ifndef _GSC_H_
-#define _GSC_H_
-
-/* I2C bus numbers */
-#define GSC_BUSNO			0
-#define BASEBOARD_EEPROM_BUSNO		1
-
-/* I2C slave addresses */
-#define GSC_SC_ADDR             0x20
-#define GSC_RTC_ADDR            0x68
-#define GSC_HWMON_ADDR          0x29
-#define GSC_EEPROM_ADDR         0x51
-#define BASEBOARD_EEPROM_ADDR	0x52
+#ifndef _VENICE_EEPROM_H_
+#define _VENICE_EEPROM_H_
 
 struct venice_board_info {
 	u8 mac[6];		/* 0x00: MAC base */
@@ -35,11 +24,10 @@ struct venice_board_info {
 	u8 chksum[2];	/* 0x4E */
 };
 
-int gsc_init(int quiet);
-int gsc_hwmon(void);
-const char *gsc_get_model(void);
-const char *gsc_get_dtb_name(int level, char *buf, int len);
-int gsc_getmac(int index, uint8_t *enetaddr);
-uint32_t gsc_get_serial(void);
+int eeprom_init(int quiet);
+const char *eeprom_get_model(void);
+const char *eeprom_get_dtb_name(int level, char *buf, int len);
+int eeprom_getmac(int index, uint8_t *enetaddr);
+uint32_t eeprom_get_serial(void);
 
 #endif
diff --git a/board/gateworks/venice/gsc.c b/board/gateworks/venice/gsc.c
deleted file mode 100644
index 763b89b36344..000000000000
--- a/board/gateworks/venice/gsc.c
+++ /dev/null
@@ -1,700 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2021 Gateworks Corporation
- */
-
-#include <common.h>
-#include <command.h>
-#include <hang.h>
-#include <hexdump.h>
-#include <i2c.h>
-#include <linux/delay.h>
-#include <dm/uclass.h>
-
-#include "gsc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct venice_board_info som_info;
-struct venice_board_info base_info;
-char venice_model[32];
-uint32_t venice_serial;
-
-/* return a mac address from EEPROM info */
-int gsc_getmac(int index, uint8_t *address)
-{
-	int i, j;
-	u32 maclow, machigh;
-	u64 mac;
-
-	j = 0;
-	if (som_info.macno) {
-		maclow = som_info.mac[5];
-		maclow |= som_info.mac[4] << 8;
-		maclow |= som_info.mac[3] << 16;
-		maclow |= som_info.mac[2] << 24;
-		machigh = som_info.mac[1];
-		machigh |= som_info.mac[0] << 8;
-		mac = machigh;
-		mac <<= 32;
-		mac |= maclow;
-		for (i = 0; i < som_info.macno; i++, j++) {
-			if (index == j)
-				goto out;
-		}
-	}
-
-	maclow = base_info.mac[5];
-	maclow |= base_info.mac[4] << 8;
-	maclow |= base_info.mac[3] << 16;
-	maclow |= base_info.mac[2] << 24;
-	machigh = base_info.mac[1];
-	machigh |= base_info.mac[0] << 8;
-	mac = machigh;
-	mac <<= 32;
-	mac |= maclow;
-	for (i = 0; i < base_info.macno; i++, j++) {
-		if (index == j)
-			goto out;
-	}
-
-	return -EINVAL;
-
-out:
-	mac += i;
-	address[0] = (mac >> 40) & 0xff;
-	address[1] = (mac >> 32) & 0xff;
-	address[2] = (mac >> 24) & 0xff;
-	address[3] = (mac >> 16) & 0xff;
-	address[4] = (mac >> 8) & 0xff;
-	address[5] = (mac >> 0) & 0xff;
-
-	return 0;
-}
-
-/* System Controller registers */
-enum {
-	GSC_SC_CTRL0		= 0,
-	GSC_SC_CTRL1		= 1,
-	GSC_SC_STATUS		= 10,
-	GSC_SC_FWCRC		= 12,
-	GSC_SC_FWVER		= 14,
-	GSC_SC_WP		= 15,
-	GSC_SC_RST_CAUSE	= 16,
-	GSC_SC_THERM_PROTECT	= 19,
-};
-
-/* System Controller Control1 bits */
-enum {
-	GSC_SC_CTRL1_WDTIME	= 4, /* 1 = 60s timeout, 0 = 30s timeout */
-	GSC_SC_CTRL1_WDEN	= 5, /* 1 = enable, 0 = disable */
-	GSC_SC_CTRL1_BOOT_CHK   = 6, /* 1 = enable alt boot check */
-	GSC_SC_CTRL1_WDDIS	= 7, /* 1 = disable boot watchdog */
-};
-
-/* System Controller Interrupt bits */
-enum {
-	GSC_SC_IRQ_PB		= 0, /* Pushbutton switch */
-	GSC_SC_IRQ_SECURE	= 1, /* Secure Key erase operation complete */
-	GSC_SC_IRQ_EEPROM_WP	= 2, /* EEPROM write violation */
-	GSC_SC_IRQ_GPIO		= 4, /* GPIO change */
-	GSC_SC_IRQ_TAMPER	= 5, /* Tamper detect */
-	GSC_SC_IRQ_WATCHDOG	= 6, /* Watchdog trip */
-	GSC_SC_IRQ_PBLONG	= 7, /* Pushbutton long hold */
-};
-
-/* System Controller WP bits */
-enum {
-	GSC_SC_WP_ALL		= 0, /* Write Protect All EEPROM regions */
-	GSC_SC_WP_BOARDINFO	= 1, /* Write Protect Board Info region */
-};
-
-/* System Controller Reset Cause */
-enum {
-	GSC_SC_RST_CAUSE_VIN		= 0,
-	GSC_SC_RST_CAUSE_PB		= 1,
-	GSC_SC_RST_CAUSE_WDT		= 2,
-	GSC_SC_RST_CAUSE_CPU		= 3,
-	GSC_SC_RST_CAUSE_TEMP_LOCAL	= 4,
-	GSC_SC_RST_CAUSE_TEMP_REMOTE	= 5,
-	GSC_SC_RST_CAUSE_SLEEP		= 6,
-	GSC_SC_RST_CAUSE_BOOT_WDT	= 7,
-	GSC_SC_RST_CAUSE_BOOT_WDT_MAN	= 8,
-	GSC_SC_RST_CAUSE_SOFT_PWR	= 9,
-	GSC_SC_RST_CAUSE_MAX		= 10,
-};
-
-#include <dm/device.h>
-static struct udevice *gsc_get_dev(int busno, int slave)
-{
-	struct udevice *dev, *bus;
-	int ret;
-
-	ret = uclass_get_device_by_seq(UCLASS_I2C, busno, &bus);
-	if (ret) {
-		printf("GSC     : failed I2C%d probe: %d\n", busno, ret);
-		return NULL;
-	}
-	ret = dm_i2c_probe(bus, slave, 0, &dev);
-	if (ret)
-		return NULL;
-
-	return dev;
-}
-
-static int gsc_read_eeprom(int bus, int slave, int alen, struct venice_board_info *info)
-{
-	int i;
-	int chksum;
-	unsigned char *buf = (unsigned char *)info;
-	struct udevice *dev;
-	int ret;
-
-	/* probe device */
-	dev = gsc_get_dev(bus, slave);
-	if (!dev) {
-		if (slave == GSC_EEPROM_ADDR)
-			puts("ERROR: Failed to probe EEPROM\n");
-		return -ENODEV;
-	}
-
-	/* read eeprom config section */
-	memset(info, 0, sizeof(*info));
-	ret = i2c_set_chip_offset_len(dev, alen);
-	if (ret) {
-		puts("EEPROM: Failed to set alen\n");
-		return ret;
-	}
-	ret = dm_i2c_read(dev, 0x00, buf, sizeof(*info));
-	if (ret) {
-		if (slave == GSC_EEPROM_ADDR)
-			printf("EEPROM: Failed to read EEPROM\n");
-		return ret;
-	}
-
-	/* validate checksum */
-	for (chksum = 0, i = 0; i < (int)sizeof(*info) - 2; i++)
-		chksum += buf[i];
-	if ((info->chksum[0] != chksum >> 8) ||
-	    (info->chksum[1] != (chksum & 0xff))) {
-		printf("EEPROM: I2C%d@0x%02x: Invalid Checksum\n", bus, slave);
-		print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info));
-		memset(info, 0, sizeof(*info));
-		return -EINVAL;
-	}
-
-	/* sanity check valid model */
-	if (info->model[0] != 'G' || info->model[1] != 'W') {
-		printf("EEPROM: I2C%d@0x%02x: Invalid Model in EEPROM\n", bus, slave);
-		print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info));
-		memset(info, 0, sizeof(*info));
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const char *gsc_get_rst_cause(struct udevice *dev)
-{
-	static char str[64];
-	static const char * const names[] = {
-		"VIN",
-		"PB",
-		"WDT",
-		"CPU",
-		"TEMP_L",
-		"TEMP_R",
-		"SLEEP",
-		"BOOT_WDT1",
-		"BOOT_WDT2",
-		"SOFT_PWR",
-	};
-	unsigned char reg;
-
-	/* reset cause */
-	str[0] = 0;
-	if (!dm_i2c_read(dev, GSC_SC_RST_CAUSE, &reg, 1)) {
-		if (reg < ARRAY_SIZE(names))
-			sprintf(str, "%s", names[reg]);
-		else
-			sprintf(str, "0x%02x", reg);
-	}
-
-	/* thermal protection */
-	if (!dm_i2c_read(dev, GSC_SC_THERM_PROTECT, &reg, 1)) {
-		strcat(str, " Thermal Protection ");
-		if (reg & BIT(0))
-			strcat(str, "Enabled");
-		else
-			strcat(str, "Disabled");
-	}
-
-	return str;
-}
-
-/* display hardware monitor ADC channels */
-int gsc_hwmon(void)
-{
-	const void *fdt = gd->fdt_blob;
-	struct udevice *dev;
-	int node, reg, mode, len, val, offset;
-	const char *label;
-	u8 buf[2];
-	int ret;
-
-	node = fdt_node_offset_by_compatible(fdt, -1, "gw,gsc-adc");
-	if (node <= 0)
-		return node;
-
-	/* probe device */
-	dev = gsc_get_dev(GSC_BUSNO, GSC_HWMON_ADDR);
-	if (!dev) {
-		puts("ERROR: Failed to probe GSC HWMON\n");
-		return -ENODEV;
-	}
-
-	/* iterate over hwmon nodes */
-	node = fdt_first_subnode(fdt, node);
-	while (node > 0) {
-		reg = fdtdec_get_int(fdt, node, "reg", -1);
-		mode = fdtdec_get_int(fdt, node, "gw,mode", -1);
-		offset = fdtdec_get_int(fdt, node, "gw,voltage-offset-microvolt", 0);
-		label = fdt_stringlist_get(fdt, node, "label", 0, NULL);
-
-		if ((reg == -1) || (mode == -1) || !label)
-			printf("invalid dt:%s\n", fdt_get_name(fdt, node, NULL));
-
-		memset(buf, 0, sizeof(buf));
-		ret = dm_i2c_read(dev, reg, buf, sizeof(buf));
-		if (ret) {
-			printf("i2c error: %d\n", ret);
-			continue;
-		}
-		val = buf[0] | buf[1] << 8;
-		if (val >= 0) {
-			const u32 *div;
-			int r[2];
-
-			switch (mode) {
-			case 0: /* temperature (C*10) */
-				if (val > 0x8000)
-					val -= 0xffff;
-				printf("%-8s: %d.%ldC\n", label, val / 10, abs(val % 10));
-				break;
-			case 1: /* prescaled voltage */
-				if (val != 0xffff)
-					printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000);
-				break;
-			case 2: /* scaled based on ref volt and resolution */
-				val *= 2500;
-				val /= 1 << 12;
-
-				/* apply pre-scaler voltage divider */
-				div  = fdt_getprop(fdt, node, "gw,voltage-divider-ohms", &len);
-				if (div && (len == sizeof(uint32_t) * 2)) {
-					r[0] = fdt32_to_cpu(div[0]);
-					r[1] = fdt32_to_cpu(div[1]);
-					if (r[0] && r[1]) {
-						val *= (r[0] + r[1]);
-						val /= r[1];
-					}
-				}
-
-				/* adjust by offset */
-				val += (offset / 1000);
-
-				printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000);
-				break;
-			}
-		}
-		node = fdt_next_subnode(fdt, node);
-	}
-
-	return 0;
-}
-
-/* determine BOM revision from model */
-int get_bom_rev(const char *str)
-{
-	int  rev_bom = 0;
-	int i;
-
-	for (i = strlen(str) - 1; i > 0; i--) {
-		if (str[i] == '-')
-			break;
-		if (str[i] >= '1' && str[i] <= '9') {
-			rev_bom = str[i] - '0';
-			break;
-		}
-	}
-	return rev_bom;
-}
-
-/* determine PCB revision from model */
-char get_pcb_rev(const char *str)
-{
-	char rev_pcb = 'A';
-	int i;
-
-	for (i = strlen(str) - 1; i > 0; i--) {
-		if (str[i] == '-')
-			break;
-		if (str[i] >= 'A') {
-			rev_pcb = str[i];
-			break;
-		}
-	}
-	return rev_pcb;
-}
-
-/*
- * get dt name based on model and detail level:
- *
- * For boards that are a combination of a SoM plus a Baseboard:
- *   Venice SoM part numbers are GW70xx where xx is:
- *    7000-7019: same PCB with som dt of '0x'
- *    7020-7039: same PCB with som dt of '2x'
- *    7040-7059: same PCB with som dt of '4x'
- *    7060-7079: same PCB with som dt of '6x'
- *    7080-7099: same PCB with som dt of '8x'
- *   Venice Baseboard part numbers are GW7xxx where xxx is:
- *    7100-7199: same PCB with base dt of '71xx'
- *    7200-7299: same PCB with base dt of '72xx'
- *    7300-7399: same PCB with base dt of '73xx'
- *    7400-7499: same PCB with base dt of '74xx'
- *    7500-7599: same PCB with base dt of '75xx'
- *    7600-7699: same PCB with base dt of '76xx'
- *    7700-7799: same PCB with base dt of '77xx'
- *    7800-7899: same PCB with base dt of '78xx'
- *   DT name is comprised of:
- *    gw<base dt>-<som dt>-[base-pcb-rev][base-bom-rev][som-pcb-rev][som-bom-rev]
- *
- * For board models from 7900-7999 each PCB is unique with its own dt:
- *   DT name is comprised:
- *    gw<model>-[pcb-rev][bom-rev]
- *
- */
-#define snprintfcat(dest, sz, fmt, ...) \
-	snprintf((dest) + strlen(dest), (sz) - strlen(dest), fmt, ##__VA_ARGS__)
-const char *gsc_get_dtb_name(int level, char *buf, int sz)
-{
-#ifdef CONFIG_IMX8MM
-	const char *pre = "imx8mm-venice-gw";
-#else
-	const char *pre = "imx8mn-venice-gw";
-#endif
-	int model, rev_pcb, rev_bom;
-
-	model = ((som_info.model[2] - '0') * 1000)
-		+ ((som_info.model[3] - '0') * 100)
-		+ ((som_info.model[4] - '0') * 10)
-		+ (som_info.model[5] - '0');
-	rev_pcb = tolower(get_pcb_rev(som_info.model));
-	rev_bom = get_bom_rev(som_info.model);
-
-	/* som + baseboard*/
-	if (base_info.model[0]) {
-		/* baseboard id: 7100-7199->71; 7200-7299->72; etc */
-		int base = ((base_info.model[2] - '0') * 10) + (base_info.model[3] - '0');
-		/* som id: 7000-7019->1; 7020-7039->2; etc */
-		int som = ((model % 100) / 20) * 2;
-		int rev_base_pcb = tolower(get_pcb_rev(base_info.model));
-		int rev_base_bom = get_bom_rev(base_info.model);
-
-		snprintf(buf, sz, "%s%2dxx-%dx", pre, base, som);
-		switch (level) {
-		case 0: /* full model (ie gw73xx-0x-a1a1) */
-			if (rev_base_bom)
-				snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom);
-			else
-				snprintfcat(buf, sz, "-%c", rev_base_pcb);
-			if (rev_bom)
-				snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom);
-			else
-				snprintfcat(buf, sz, "%c", rev_pcb);
-			break;
-		case 1: /* don't care about SoM revision */
-			if (rev_base_bom)
-				snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom);
-			else
-				snprintfcat(buf, sz, "-%c", rev_base_pcb);
-			snprintfcat(buf, sz, "xx");
-			break;
-		case 2: /* don't care about baseboard revision */
-			snprintfcat(buf, sz, "-xx");
-			if (rev_bom)
-				snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom);
-			else
-				snprintfcat(buf, sz, "%c", rev_pcb);
-			break;
-		case 3: /* don't care about SoM/baseboard revision */
-			break;
-		default:
-			return NULL;
-		}
-	} else {
-		snprintf(buf, sz, "%s%04d", pre, model);
-		switch (level) {
-		case 0: /* full model wth PCB and BOM revision first (ie gw7901-a1) */
-			if (rev_bom)
-				snprintfcat(buf, sz, "-%c%d", rev_pcb, rev_bom);
-			else
-				snprintfcat(buf, sz, "-%c", rev_pcb);
-			break;
-		case 1: /* don't care about BOM revision */
-			snprintfcat(buf, sz, "-%c", rev_pcb);
-			break;
-		case 2: /* don't care about PCB or BOM revision */
-			break;
-		default:
-			return NULL;
-		}
-	}
-
-	return buf;
-}
-
-static int gsc_read(void)
-{
-	char rev_pcb;
-	int rev_bom;
-	int ret;
-
-	ret = gsc_read_eeprom(GSC_BUSNO, GSC_EEPROM_ADDR, 1, &som_info);
-	if (ret) {
-		memset(&som_info, 0, sizeof(som_info));
-		return ret;
-	}
-
-	/* read optional baseboard EEPROM */
-	gsc_read_eeprom(BASEBOARD_EEPROM_BUSNO, BASEBOARD_EEPROM_ADDR,
-			2, &base_info);
-
-	/* create model strings */
-	if (base_info.model[0]) {
-		sprintf(venice_model, "GW%c%c%c%c-%c%c-",
-			som_info.model[2], /* family */
-			base_info.model[3], /* baseboard */
-			base_info.model[4], base_info.model[5], /* subload of baseboard */
-			som_info.model[4], som_info.model[5]); /* last 2digits of SOM */
-
-		/* baseboard revision */
-		rev_pcb = get_pcb_rev(base_info.model);
-		rev_bom = get_bom_rev(base_info.model);
-		if (rev_bom)
-			sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom);
-		else
-			sprintf(venice_model + strlen(venice_model), "%c", rev_pcb);
-		/* som revision */
-		rev_pcb = get_pcb_rev(som_info.model);
-		rev_bom = get_bom_rev(som_info.model);
-		if (rev_bom)
-			sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom);
-		else
-			sprintf(venice_model + strlen(venice_model), "%c", rev_pcb);
-	} else {
-		strcpy(venice_model, som_info.model);
-	}
-	venice_serial = som_info.serial;
-
-	return 0;
-}
-
-static int gsc_info(int verbose)
-{
-	struct udevice *dev;
-	unsigned char buf[16];
-
-	printf("Model   : %s\n", venice_model);
-	printf("Serial  : %d\n", som_info.serial);
-	printf("MFGDate : %02x-%02x-%02x%02x\n",
-	       som_info.mfgdate[0], som_info.mfgdate[1],
-	       som_info.mfgdate[2], som_info.mfgdate[3]);
-	if (base_info.model[0] && verbose > 1) {
-		printf("SOM     : %s %d %02x-%02x-%02x%02x\n",
-		       som_info.model, som_info.serial,
-		       som_info.mfgdate[0], som_info.mfgdate[1],
-		       som_info.mfgdate[2], som_info.mfgdate[3]);
-		printf("BASE    : %s %d %02x-%02x-%02x%02x\n",
-		       base_info.model, base_info.serial,
-		       base_info.mfgdate[0], base_info.mfgdate[1],
-		       base_info.mfgdate[2], base_info.mfgdate[3]);
-	}
-
-	/* Display RTC */
-	puts("RTC     : ");
-	dev = gsc_get_dev(GSC_BUSNO, GSC_RTC_ADDR);
-	if (!dev) {
-		puts("Failed to probe GSC RTC\n");
-	} else {
-		dm_i2c_read(dev, 0, buf, 6);
-		printf("%d\n", buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24);
-	}
-
-	/* Display hwmon */
-	gsc_hwmon();
-
-	return 0;
-}
-
-int gsc_init(int quiet)
-{
-	unsigned char buf[16];
-	struct udevice *dev;
-	int ret;
-
-	/*
-	 * On a board with a missing/depleted backup battery for GSC, the
-	 * board may be ready to probe the GSC before its firmware is
-	 * running.  We will wait here indefinately for the GSC/EEPROM.
-	 */
-#ifdef CONFIG_IMX8MN
-	// TODO:
-	//   IMX8MN boots quicker than IMX8MM and exposes issue
-	//   where because GSC I2C state machine isn't running and its
-	//   SCL/SDA are driven low spams i2c errors
-	//
-	//   Put a loop here that somehow waits for I2C CLK/DAT to be high
-	mdelay(40);
-#endif
-	while (1) {
-		/* probe device */
-		dev = gsc_get_dev(GSC_BUSNO, GSC_SC_ADDR);
-		if (dev)
-			break;
-		mdelay(1);
-	}
-
-	ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
-	if (ret) {
-		puts("ERROR: Failed reading GSC\n");
-		return ret;
-	}
-	gsc_read();
-
-	/* banner */
-	if (!quiet) {
-		printf("GSC     : v%d 0x%04x", buf[GSC_SC_FWVER],
-		       buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC + 1] << 8);
-		printf(" RST:%s", gsc_get_rst_cause(dev));
-		printf("\n");
-		gsc_info(1);
-	}
-
-	if (ret)
-		hang();
-
-	return (16 << som_info.sdram_size);
-}
-
-const char *gsc_get_model(void)
-{
-	return venice_model;
-}
-
-uint32_t gsc_get_serial(void)
-{
-	return venice_serial;
-}
-
-#if !(IS_ENABLED(CONFIG_SPL_BUILD))
-static int gsc_sleep(unsigned long secs)
-{
-	unsigned char reg;
-	struct udevice *dev;
-	int ret;
-
-	/* probe device */
-	dev = gsc_get_dev(GSC_BUSNO, GSC_SC_ADDR);
-	if (!dev)
-		return -ENODEV;
-
-	printf("GSC Sleeping for %ld seconds\n", secs);
-	reg = (secs >> 24) & 0xff;
-	ret = dm_i2c_write(dev, 9, &reg, 1);
-	if (ret)
-		goto err;
-	reg = (secs >> 16) & 0xff;
-	ret = dm_i2c_write(dev, 8, &reg, 1);
-	if (ret)
-		goto err;
-	reg = (secs >> 8) & 0xff;
-	ret = dm_i2c_write(dev, 7, &reg, 1);
-	if (ret)
-		goto err;
-	reg = secs & 0xff;
-	ret = dm_i2c_write(dev, 6, &reg, 1);
-	if (ret)
-		goto err;
-	ret = dm_i2c_read(dev, GSC_SC_CTRL1, &reg, 1);
-	if (ret)
-		goto err;
-	reg |= (1 << 2);
-	ret = dm_i2c_write(dev, GSC_SC_CTRL1, &reg, 1);
-	if (ret)
-		goto err;
-	reg &= ~(1 << 2);
-	reg |= 0x3;
-	ret = dm_i2c_write(dev, GSC_SC_CTRL1, &reg, 1);
-	if (ret)
-		goto err;
-
-	return 0;
-
-err:
-	printf("i2c error\n");
-	return ret;
-}
-
-static int gsc_boot_wd_disable(void)
-{
-	u8 reg;
-	struct udevice *dev;
-	int ret;
-
-	/* probe device */
-	dev = gsc_get_dev(GSC_BUSNO, GSC_SC_ADDR);
-	if (!dev)
-		return -ENODEV;
-
-	ret = dm_i2c_read(dev, GSC_SC_CTRL1, &reg, 1);
-	if (ret)
-		goto err;
-	reg |= (1 << GSC_SC_CTRL1_WDDIS);
-	reg &= ~(1 << GSC_SC_CTRL1_BOOT_CHK);
-	ret = dm_i2c_write(dev, GSC_SC_CTRL1, &reg, 1);
-	if (ret)
-		goto err;
-	puts("GSC     : boot watchdog disabled\n");
-
-	return 0;
-
-err:
-	printf("i2c error");
-	return ret;
-}
-
-static int do_gsc(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
-{
-	if (argc < 2)
-		return gsc_info(2);
-
-	if (strcasecmp(argv[1], "sleep") == 0) {
-		if (argc < 3)
-			return CMD_RET_USAGE;
-		if (!gsc_sleep(dectoul(argv[2], NULL)))
-			return CMD_RET_SUCCESS;
-	} else if (strcasecmp(argv[1], "hwmon") == 0) {
-		if (!gsc_hwmon())
-			return CMD_RET_SUCCESS;
-	} else if (strcasecmp(argv[1], "wd-disable") == 0) {
-		if (!gsc_boot_wd_disable())
-			return CMD_RET_SUCCESS;
-	}
-
-	return CMD_RET_USAGE;
-}
-
-U_BOOT_CMD(gsc, 4, 1, do_gsc, "Gateworks System Controller",
-	   "[sleep <secs>]|[hwmon]|[wd-disable]\n");
-#endif
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index 59a6a29f70d8..7a65eafea2a7 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -7,13 +7,9 @@
 #include <cpu_func.h>
 #include <hang.h>
 #include <i2c.h>
-#include <image.h>
 #include <init.h>
-#include <log.h>
 #include <spl.h>
-#include <asm/io.h>
 #include <asm/mach-imx/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx8mm_pins.h>
 #include <asm/arch/imx8mn_pins.h>
@@ -21,22 +17,17 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/arch/ddr.h>
 #include <asm-generic/gpio.h>
-
 #include <dm/uclass.h>
 #include <dm/device.h>
-#include <dm/uclass-internal.h>
-#include <dm/device-internal.h>
-
+#include <linux/delay.h>
 #include <power/bd71837.h>
 #include <power/mp5416.h>
 
-#include "gsc.h"
+#include "eeprom.h"
 #include "lpddr4_timing.h"
 
 #define PCIE_RSTN IMX_GPIO_NR(4, 6)
 
-DECLARE_GLOBAL_DATA_PTR;
-
 static void spl_dram_init(int size)
 {
 	struct dram_timing_info *dram_timing;
@@ -65,8 +56,8 @@ static void spl_dram_init(int size)
 		dram_timing = &dram_timing_1gb_single_die;
 		break;
 	case 2048:
-		if (!strcmp(gsc_get_model(), "GW7902-SP466-A") ||
-		    !strcmp(gsc_get_model(), "GW7902-SP466-B")) {
+		if (!strcmp(eeprom_get_model(), "GW7902-SP466-A") ||
+		    !strcmp(eeprom_get_model(), "GW7902-SP466-B")) {
 			dram_timing = &dram_timing_2gb_dual_die;
 		} else {
 			dram_timing = &dram_timing_2gb_single_die;
@@ -136,7 +127,7 @@ static int dm_i2c_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set)
 
 static int power_init_board(void)
 {
-	const char *model = gsc_get_model();
+	const char *model = eeprom_get_model();
 	struct udevice *bus;
 	struct udevice *dev;
 	int ret;
@@ -230,22 +221,36 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 
-	ret = uclass_get_device_by_name(UCLASS_CLK,
-					"clock-controller@30380000",
-					&dev);
-	if (ret < 0) {
-		printf("Failed to find clock node. Check device tree\n");
-		hang();
-	}
-
 	enable_tzc380();
 
 	/* need to hold PCIe switch in reset otherwise it can lock i2c bus EEPROM is on */
 	gpio_request(PCIE_RSTN, "perst#");
 	gpio_direction_output(PCIE_RSTN, 0);
 
-	/* GSC */
-	dram_sz = gsc_init(0);
+	/*
+	 * probe GSC device
+	 *
+	 * On a board with a missing/depleted backup battery for GSC, the
+	 * board may be ready to probe the GSC before its firmware is
+	 * running. We will wait here indefinately for the GSC EEPROM.
+	 */
+#ifdef CONFIG_IMX8MN
+	/*
+	 * IMX8MN boots quicker than IMX8MM and exposes issue
+	 * where because GSC I2C state machine isn't running and its
+	 * SCL/SDA are driven low the I2C driver spams 'Arbitration lost'
+	 * I2C errors.
+	 *
+	 * TODO: Put a loop here that somehow waits for I2C CLK/DAT to be high
+	 */
+	mdelay(50);
+#endif
+	while (1) {
+		if (!uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(gsc), &dev))
+			break;
+		mdelay(1);
+	}
+	dram_sz = eeprom_init(0);
 
 	/* PMIC */
 	power_init_board();
diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c
index 425c69056da5..b1828f4f187a 100644
--- a/board/gateworks/venice/venice.c
+++ b/board/gateworks/venice/venice.c
@@ -3,21 +3,12 @@
  * Copyright 2021 Gateworks Corporation
  */
 
-#include <common.h>
 #include <init.h>
 #include <led.h>
-#include <linux/delay.h>
 #include <miiphy.h>
-#include <netdev.h>
-
-#include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/unaligned.h>
-
-#include "gsc.h"
 
-DECLARE_GLOBAL_DATA_PTR;
+#include "eeprom.h"
 
 int board_phys_sdram_size(phys_size_t *size)
 {
@@ -37,7 +28,7 @@ int board_fit_config_name_match(const char *name)
 	char buf[32];
 
 	do {
-		dtb = gsc_get_dtb_name(i++, buf, sizeof(buf));
+		dtb = eeprom_get_dtb_name(i++, buf, sizeof(buf));
 		if (!strcmp(dtb, name)) {
 			if (!init++)
 				printf("DTB     : %s\n", name);
@@ -100,13 +91,11 @@ int board_phy_config(struct phy_device *phydev)
 
 int board_init(void)
 {
-	gsc_init(1);
+	eeprom_init(1);
 
 	if (IS_ENABLED(CONFIG_FEC_MXC))
 		setup_fec();
 
-	gsc_hwmon();
-
 	return 0;
 }
 
@@ -122,13 +111,13 @@ int board_late_init(void)
 
 	/* Set board serial/model */
 	if (!env_get("serial#"))
-		env_set_ulong("serial#", gsc_get_serial());
-	env_set("model", gsc_get_model());
+		env_set_ulong("serial#", eeprom_get_serial());
+	env_set("model", eeprom_get_model());
 
 	/* Set fdt_file vars */
 	i = 0;
 	do {
-		str = gsc_get_dtb_name(i, fdt, sizeof(fdt));
+		str = eeprom_get_dtb_name(i, fdt, sizeof(fdt));
 		if (str) {
 			sprintf(env, "fdt_file%d", i + 1);
 			strcat(fdt, ".dtb");
@@ -146,7 +135,7 @@ int board_late_init(void)
 			sprintf(env, "ethaddr");
 		str = env_get(env);
 		if (!str) {
-			ret = gsc_getmac(i, enetaddr);
+			ret = eeprom_getmac(i, enetaddr);
 			if (!ret)
 				eth_env_set_enetaddr(env, enetaddr);
 		}
@@ -166,7 +155,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 	int off;
 
 	/* set board model dt prop */
-	fdt_setprop_string(blob, 0, "board", gsc_get_model());
+	fdt_setprop_string(blob, 0, "board", eeprom_get_model());
 
 	/* update temp thresholds */
 	off = fdt_path_offset(blob, "/thermal-zones/cpu-thermal/trips");
diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig
index ff926dac0e18..d0fe56eacf26 100644
--- a/configs/imx8mn_venice_defconfig
+++ b/configs/imx8mn_venice_defconfig
@@ -13,6 +13,7 @@ CONFIG_SPL_TEXT_BASE=0x912000
 CONFIG_TARGET_IMX8MN_VENICE=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0xff8000
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
