mbox series

[PULL] u-boot-riscv/master

Message ID 20220316025640.GA7600@atcfdc88
State Accepted
Delegated to: Tom Rini
Headers show
Series [PULL] u-boot-riscv/master | expand

Pull-request

https://source.denx.de/u-boot/custodians/u-boot-riscv.git

Message

Leo Liang March 16, 2022, 2:56 a.m. UTC
Hi Tom,

The following changes since commit c149bf41404e34014e37de32fac332892b11bd4a:

  Prepare v2022.04-rc4 (2022-03-14 16:39:08 -0400)

are available in the Git repository at:

  https://source.denx.de/u-boot/custodians/u-boot-riscv.git 

for you to fetch changes up to aa34e13346cf727197981c599f688b406005049a:

  pinctrl: k210: Fix bias-pull-up (2022-03-15 17:43:11 +0800)

CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/11297

----------------------------------------------------------------
Damien Le Moal (4):
      k210: use the board vendor name rather than the marketing name
      k210: dts: add missing power bus clocks
      k210: dts: align fpioa node with Linux
      spi: dw: Force set K210 fifo length to 31

Niklas Cassel (3):
      k210: dts: align plic node with Linux
      pinctrl: k210: Fix loop in k210_pc_get_drive()
      pinctrl: k210: Fix bias-pull-up

Sean Anderson (1):
      spi: dw: Actually mask interrupts

 MAINTAINERS                                        |  12 +-
 arch/riscv/dts/k210-maix-bit.dts                   |   3 +-
 arch/riscv/dts/k210.dtsi                           | 177 ++++++++++++---------
 board/sipeed/maix/maix.c                           |   2 +-
 doc/board/sipeed/maix.rst                          |  20 +--
 ...ryte,k210-sysctl.txt => canaan,k210-sysctl.txt} |   8 +-
 ...ndryte,k210-fpioa.txt => canaan,k210-fpioa.txt} |  12 +-
 doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt   |   4 +-
 drivers/clk/Makefile                               |   2 +-
 drivers/clk/{clk_kendryte.c => clk_k210.c}         |   4 +-
 drivers/pinctrl/Makefile                           |   2 +-
 .../pinctrl/{pinctrl-kendryte.c => pinctrl-k210.c} |  25 ++-
 drivers/spi/designware_spi.c                       |  20 ++-
 include/configs/sipeed-maix.h                      |   2 +-
 include/{kendryte => k210}/pll.h                   |   0
 test/dm/k210_pll.c                                 |   2 +-
 16 files changed, 174 insertions(+), 121 deletions(-)
 rename doc/device-tree-bindings/mfd/{kendryte,k210-sysctl.txt => canaan,k210-sysctl.txt} (78%)
 rename doc/device-tree-bindings/pinctrl/{kendryte,k210-fpioa.txt => canaan,k210-fpioa.txt} (91%)
 rename drivers/clk/{clk_kendryte.c => clk_k210.c} (99%)
 rename drivers/pinctrl/{pinctrl-kendryte.c => pinctrl-k210.c} (97%)
 rename include/{kendryte => k210}/pll.h (100%)

 Best regards,
 Leo

Comments

Tom Rini March 16, 2022, 2:48 p.m. UTC | #1
On Wed, Mar 16, 2022 at 10:56:40AM +0800, Leo Liang wrote:

> Hi Tom,
> 
> The following changes since commit c149bf41404e34014e37de32fac332892b11bd4a:
> 
>   Prepare v2022.04-rc4 (2022-03-14 16:39:08 -0400)
> 
> are available in the Git repository at:
> 
>   https://source.denx.de/u-boot/custodians/u-boot-riscv.git 
> 
> for you to fetch changes up to aa34e13346cf727197981c599f688b406005049a:
> 
>   pinctrl: k210: Fix bias-pull-up (2022-03-15 17:43:11 +0800)
> 
> CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/11297
> 

Applied to u-boot/master, thanks!