Message ID | 20211224072536.270251-7-vigneshr@ti.com |
---|---|
State | Changes Requested |
Delegated to: | Tom Rini |
Headers | show |
Series | ARM: ti: AM64x: Add Ethernet boot support on AM64x SK | expand |
On Fri, Dec 24, 2021 at 12:55:34PM +0530, Vignesh Raghavendra wrote: > ROM supports boot from CPSW second port, therefore set eth1 boot > interface > > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> > --- > include/configs/am64x_evm.h | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h > index 99624081c3..cd4b658e5f 100644 > --- a/include/configs/am64x_evm.h > +++ b/include/configs/am64x_evm.h > @@ -33,7 +33,7 @@ > * our memory footprint. The less we use for BSS the more we have available > * for everything else. > */ > -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 > +#define CONFIG_SPL_BSS_MAX_SIZE 0xa000 > /* > * Link BSS to be within SPL in a dedicated region located near the top of > * the MCU SRAM, this way making it available also before relocation. Note > @@ -64,6 +64,7 @@ > "if test $fdtfile = undefined; then " \ > "echo WARNING: Could not determine device tree to use; fi; \0" \ > "name_kern=Image\0" \ > + "ethact=eth0\0" \ > "console=ttyS2,115200n8\0" \ > "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \ > "${mtdparts}\0" \ > @@ -140,4 +141,6 @@ > > #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 > > +#define CONFIG_SPL_ETH_DEVICE "eth1" > + > #endif /* __CONFIG_AM642_EVM_H */ What's going on exactly here? First, CONFIG_SPL_ETH_DEVICE needs to be migrated to Kconfig now, if we're going to use it. But, it's used to set "ethact", which wouldd normally be eth0, but you're setting it to eth1 here and eth0 for U-Boot itself? Can you please explain the setup here? Thanks!
On 17/01/22 8:16 pm, Tom Rini wrote: > On Fri, Dec 24, 2021 at 12:55:34PM +0530, Vignesh Raghavendra wrote: > >> ROM supports boot from CPSW second port, therefore set eth1 boot >> interface >> >> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> >> --- >> include/configs/am64x_evm.h | 5 ++++- >> 1 file changed, 4 insertions(+), 1 deletion(-) >> >> diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h >> index 99624081c3..cd4b658e5f 100644 >> --- a/include/configs/am64x_evm.h >> +++ b/include/configs/am64x_evm.h >> @@ -33,7 +33,7 @@ >> * our memory footprint. The less we use for BSS the more we have available >> * for everything else. >> */ >> -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 >> +#define CONFIG_SPL_BSS_MAX_SIZE 0xa000 >> /* >> * Link BSS to be within SPL in a dedicated region located near the top of >> * the MCU SRAM, this way making it available also before relocation. Note >> @@ -64,6 +64,7 @@ >> "if test $fdtfile = undefined; then " \ >> "echo WARNING: Could not determine device tree to use; fi; \0" \ >> "name_kern=Image\0" \ >> + "ethact=eth0\0" \ This is redundant, will drop. >> "console=ttyS2,115200n8\0" \ >> "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \ >> "${mtdparts}\0" \ >> @@ -140,4 +141,6 @@ >> >> #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 >> >> +#define CONFIG_SPL_ETH_DEVICE "eth1" >> + >> #endif /* __CONFIG_AM642_EVM_H */ > > What's going on exactly here? First, CONFIG_SPL_ETH_DEVICE needs to be > migrated to Kconfig now, if we're going to use it. But, it's used to > set "ethact", which wouldd normally be eth0, but you're setting it to > eth1 here and eth0 for U-Boot itself? Can you please explain the setup > here? Thanks! > ROM supports boot from cpsw_port2 (eth1) and not cpsw_port1 (eth0), hence I had to set CONFIG_SPL_ETH_DEVICE to eth1. Thinking a bit more, it does not make sense to enable both ports in SPL as only eth1 is used during ethboot. So CONFIG_SPL_ETH_DEVICE need not be touched if eth0 is disabled for SPL. Will update DT files accordingly. Regards Vignesh
diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h index 99624081c3..cd4b658e5f 100644 --- a/include/configs/am64x_evm.h +++ b/include/configs/am64x_evm.h @@ -33,7 +33,7 @@ * our memory footprint. The less we use for BSS the more we have available * for everything else. */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 +#define CONFIG_SPL_BSS_MAX_SIZE 0xa000 /* * Link BSS to be within SPL in a dedicated region located near the top of * the MCU SRAM, this way making it available also before relocation. Note @@ -64,6 +64,7 @@ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "name_kern=Image\0" \ + "ethact=eth0\0" \ "console=ttyS2,115200n8\0" \ "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \ "${mtdparts}\0" \ @@ -140,4 +141,6 @@ #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_ETH_DEVICE "eth1" + #endif /* __CONFIG_AM642_EVM_H */
ROM supports boot from CPSW second port, therefore set eth1 boot interface Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- include/configs/am64x_evm.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)