diff mbox series

[u-boot-marvell,v2,9/9] arm: mvebu: spl: Fix 100 column exceeds

Message ID 20211126143738.23830-10-kabel@kernel.org
State Superseded
Delegated to: Stefan Roese
Headers show
Series More verifications for kwbimage in SPL | expand

Commit Message

Marek Behún Nov. 26, 2021, 2:37 p.m. UTC 
From: Marek Behún <marek.behun@nic.cz>

Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
 arch/arm/mach-mvebu/spl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Stefan Roese Nov. 30, 2021, 6:22 a.m. UTC | #1 
On 11/26/21 15:37, Marek Behún wrote:
> From: Marek Behún <marek.behun@nic.cz>
> 
> Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.
> 
> Signed-off-by: Marek Behún <marek.behun@nic.cz>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
>   arch/arm/mach-mvebu/spl.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
> index 7dbe8eeba3..7450e1e3da 100644
> --- a/arch/arm/mach-mvebu/spl.c
> +++ b/arch/arm/mach-mvebu/spl.c
> @@ -47,7 +47,8 @@
>   #if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR != 0
>   #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR must be set to 0
>   #endif
> -#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
> +#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && \
> +    CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
>   #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET must be set to 0
>   #endif
>   #endif
> @@ -58,7 +59,8 @@
>    * set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
>    */
>   #ifdef CONFIG_SPL_SATA
> -#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
> +#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || \
> +    !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
>   #error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
>   #endif
>   #endif
> 

Viele Grüße,
Stefan Roese
diff mbox series

Patch

diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 7dbe8eeba3..7450e1e3da 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -47,7 +47,8 @@ 
 #if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR != 0
 #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR must be set to 0
 #endif
-#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
+#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && \
+    CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
 #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET must be set to 0
 #endif
 #endif
@@ -58,7 +59,8 @@ 
  * set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
  */
 #ifdef CONFIG_SPL_SATA
-#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
+#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || \
+    !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
 #error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
 #endif
 #endif