@@ -26,6 +26,9 @@ static const struct ccu_clk_gate a64_gates[] = {
[CLK_BUS_OHCI0] = GATE(0x060, BIT(28)),
[CLK_BUS_OHCI1] = GATE(0x060, BIT(29)),
+ [CLK_BUS_HDMI] = GATE(0x064, BIT(11)),
+ [CLK_BUS_DE] = GATE(0x064, BIT(12)),
+
[CLK_BUS_UART0] = GATE(0x06c, BIT(16)),
[CLK_BUS_UART1] = GATE(0x06c, BIT(17)),
[CLK_BUS_UART2] = GATE(0x06c, BIT(18)),
@@ -41,6 +44,11 @@ static const struct ccu_clk_gate a64_gates[] = {
[CLK_USB_HSIC_12M] = GATE(0x0cc, BIT(11)),
[CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)),
[CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)),
+
+ [CLK_DE] = GATE(0x104, BIT(31)),
+
+ [CLK_HDMI] = GATE(0x150, BIT(31)),
+ [CLK_HDMI_DDC] = GATE(0x154, BIT(31)),
};
static const struct ccu_reset a64_resets[] = {
@@ -60,6 +68,10 @@ static const struct ccu_reset a64_resets[] = {
[RST_BUS_OHCI0] = RESET(0x2c0, BIT(28)),
[RST_BUS_OHCI1] = RESET(0x2c0, BIT(29)),
+ [RST_BUS_HDMI0] = RESET(0x2c4, BIT(10)),
+ [RST_BUS_HDMI1] = RESET(0x2c4, BIT(11)),
+ [RST_BUS_DE] = RESET(0x2c4, BIT(12)),
+
[RST_BUS_UART0] = RESET(0x2d8, BIT(16)),
[RST_BUS_UART1] = RESET(0x2d8, BIT(17)),
[RST_BUS_UART2] = RESET(0x2d8, BIT(18)),
@@ -30,6 +30,9 @@ static struct ccu_clk_gate h3_gates[] = {
[CLK_BUS_OHCI2] = GATE(0x060, BIT(30)),
[CLK_BUS_OHCI3] = GATE(0x060, BIT(31)),
+ [CLK_BUS_HDMI] = GATE(0x064, BIT(11)),
+ [CLK_BUS_DE] = GATE(0x064, BIT(12)),
+
[CLK_BUS_UART0] = GATE(0x06c, BIT(16)),
[CLK_BUS_UART1] = GATE(0x06c, BIT(17)),
[CLK_BUS_UART2] = GATE(0x06c, BIT(18)),
@@ -48,6 +51,11 @@ static struct ccu_clk_gate h3_gates[] = {
[CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)),
[CLK_USB_OHCI2] = GATE(0x0cc, BIT(18)),
[CLK_USB_OHCI3] = GATE(0x0cc, BIT(19)),
+
+ [CLK_DE] = GATE(0x104, BIT(31)),
+
+ [CLK_HDMI] = GATE(0x150, BIT(31)),
+ [CLK_HDMI_DDC] = GATE(0x154, BIT(31)),
};
static struct ccu_reset h3_resets[] = {
@@ -72,6 +80,10 @@ static struct ccu_reset h3_resets[] = {
[RST_BUS_OHCI2] = RESET(0x2c0, BIT(30)),
[RST_BUS_OHCI3] = RESET(0x2c0, BIT(31)),
+ [RST_BUS_HDMI0] = RESET(0x2c4, BIT(10)),
+ [RST_BUS_HDMI1] = RESET(0x2c4, BIT(11)),
+ [RST_BUS_DE] = RESET(0x2c4, BIT(12)),
+
[RST_BUS_EPHY] = RESET(0x2c8, BIT(2)),
[RST_BUS_UART0] = RESET(0x2d8, BIT(16)),
These clocks and resets are needed for video drivers. Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> --- drivers/clk/sunxi/clk_a64.c | 12 ++++++++++++ drivers/clk/sunxi/clk_h3.c | 12 ++++++++++++ 2 files changed, 24 insertions(+)