diff mbox series

[v6,03/13] pci: pcie-brcmstb: Fix inbound window configurations

Message ID 20210112125531.26547-4-nsaenzjulienne@suse.de
State Accepted
Commit c709243ee0e1c3e1f8aaa750efb5b738493502c7
Delegated to: Matthias Brugger
Headers show
Series Raspberry Pi 400/Compute Module 4 support | expand

Commit Message

Nicolas Saenz Julienne Jan. 12, 2021, 12:55 p.m. UTC 
So far we've assumed a fixed configuration for inbound windows as we had
a single user for this controller. But the controller's DMA constraints
were improved starting with BCM2711's B1 revision of the SoC, notably
available in CM4 and Pi400. They allow for wider inbound windows. We can
now cover the whole address space, whereas before we where limited to
the lower 3GB.

This information is passed to us through DT's 'dma-ranges' property and
it's specially important for us to honor it since some interactions with
the board's co-processor assume we're doing so (specifically the XHCI
firmware load operation, which is handled by the co-processor after
u-boot has correctly configured the PCIe controller).

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/pci/pcie_brcmstb.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/pcie_brcmstb.c b/drivers/pci/pcie_brcmstb.c
index dd2a4ef629..bd645d7896 100644
--- a/drivers/pci/pcie_brcmstb.c
+++ b/drivers/pci/pcie_brcmstb.c
@@ -432,6 +432,7 @@  static int brcm_pcie_probe(struct udevice *dev)
 	struct pci_controller *hose = dev_get_uclass_priv(ctlr);
 	struct brcm_pcie *pcie = dev_get_priv(dev);
 	void __iomem *base = pcie->base;
+	struct pci_region region;
 	bool ssc_good = false;
 	int num_out_wins = 0;
 	u64 rc_bar2_offset, rc_bar2_size;
@@ -468,13 +469,10 @@  static int brcm_pcie_probe(struct udevice *dev)
 			MISC_CTRL_SCB_ACCESS_EN_MASK |
 			MISC_CTRL_CFG_READ_UR_MODE_MASK |
 			MISC_CTRL_MAX_BURST_SIZE_128);
-	/*
-	 * TODO: When support for other SoCs than BCM2711 is added we may
-	 * need to use the base address and size(s) provided in the dma-ranges
-	 * property.
-	 */
-	rc_bar2_offset = 0;
-	rc_bar2_size = 0xc0000000;
+
+	pci_get_dma_regions(dev, &region, 0);
+	rc_bar2_offset = region.bus_start - region.phys_start;
+	rc_bar2_size = 1ULL << fls64(region.size - 1);
 
 	tmp = lower_32_bits(rc_bar2_offset);
 	u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size),