Message ID | 20201118102717.635129-1-icenowy@aosc.io |
---|---|
State | Accepted |
Commit | ab3b53f30f348a1f2a31109464d75c5fd4860653 |
Delegated to: | Andre Przywara |
Headers | show |
Series | [v3] sunxi: add PineCube board | expand |
On 18/11/2020 10:27, Icenowy Zheng wrote: > PineCube is an IP camera development kit released by Pine64. > > It comes with the following compoents: > > - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC, > a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps > Ethernet port and FPC connectors for camera and daughter board. > - An OV5640-based camera module which is connected to the parallel CSI > bus of the mainboard. > - A daughterboard with several buttons, a SD slot, some IR LEDs, a > microphone and a speaker connector. > > As the device tree is synchronized in a previous commit, just add it to > Makefile, create a new MAINTAINER item and provide a defconfig. Thanks for the quick fix. I could now compile an image. > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Cheers, Andre > --- > Changes since v2: > - Add Makefile reference to DT. > Changes since v1: > - Dropped LDO3 quirk. > > arch/arm/dts/Makefile | 1 + > board/sunxi/MAINTAINERS | 5 +++++ > configs/pinecube_defconfig | 15 +++++++++++++++ > 3 files changed, 21 insertions(+) > create mode 100644 configs/pinecube_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 7d1a369845..e6993733b0 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -587,6 +587,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \ > sun8i-r40-bananapi-m2-ultra.dtb \ > sun8i-v40-bananapi-m2-berry.dtb > dtb-$(CONFIG_MACH_SUN8I_V3S) += \ > + sun8i-s3-pinecube.dtb \ > sun8i-v3s-licheepi-zero.dtb > dtb-$(CONFIG_MACH_SUN50I_H5) += \ > sun50i-h5-bananapi-m2-plus.dtb \ > diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS > index d3755ae41a..735801ae1d 100644 > --- a/board/sunxi/MAINTAINERS > +++ b/board/sunxi/MAINTAINERS > @@ -440,6 +440,11 @@ M: Vasily Khoruzhick <anarsoul@gmail.com> > S: Maintained > F: configs/pinebook_defconfig > > +PINECUBE BOARD: > +M: Icenowy Zheng <icenowy@aosc.io> > +S: Maintained > +F: configs/pinecube_defconfig > + > PINE64 BOARDS > M: Andre Przywara <andre.przywara@arm.com> > S: Maintained > diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig > new file mode 100644 > index 0000000000..a8c404f6b1 > --- /dev/null > +++ b/configs/pinecube_defconfig > @@ -0,0 +1,15 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SPL=y > +CONFIG_MACH_SUN8I_V3S=y > +CONFIG_SUNXI_DRAM_DDR3_1333=y > +CONFIG_DRAM_CLK=504 > +CONFIG_DRAM_ODT_EN=y > +CONFIG_I2C0_ENABLE=y > +CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube" > +CONFIG_SPL_I2C_SUPPORT=y > +# CONFIG_NETDEVICES is not set > +CONFIG_AXP209_POWER=y > +CONFIG_AXP_DCDC2_VOLT=1250 > +CONFIG_AXP_DCDC3_VOLT=3300 > +CONFIG_CONS_INDEX=3 >
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7d1a369845..e6993733b0 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -587,6 +587,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN8I_V3S) += \ + sun8i-s3-pinecube.dtb \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-bananapi-m2-plus.dtb \ diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index d3755ae41a..735801ae1d 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -440,6 +440,11 @@ M: Vasily Khoruzhick <anarsoul@gmail.com> S: Maintained F: configs/pinebook_defconfig +PINECUBE BOARD: +M: Icenowy Zheng <icenowy@aosc.io> +S: Maintained +F: configs/pinecube_defconfig + PINE64 BOARDS M: Andre Przywara <andre.przywara@arm.com> S: Maintained diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig new file mode 100644 index 0000000000..a8c404f6b1 --- /dev/null +++ b/configs/pinecube_defconfig @@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN8I_V3S=y +CONFIG_SUNXI_DRAM_DDR3_1333=y +CONFIG_DRAM_CLK=504 +CONFIG_DRAM_ODT_EN=y +CONFIG_I2C0_ENABLE=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube" +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_NETDEVICES is not set +CONFIG_AXP209_POWER=y +CONFIG_AXP_DCDC2_VOLT=1250 +CONFIG_AXP_DCDC3_VOLT=3300 +CONFIG_CONS_INDEX=3
PineCube is an IP camera development kit released by Pine64. It comes with the following compoents: - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC, a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps Ethernet port and FPC connectors for camera and daughter board. - An OV5640-based camera module which is connected to the parallel CSI bus of the mainboard. - A daughterboard with several buttons, a SD slot, some IR LEDs, a microphone and a speaker connector. As the device tree is synchronized in a previous commit, just add it to Makefile, create a new MAINTAINER item and provide a defconfig. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- Changes since v2: - Add Makefile reference to DT. Changes since v1: - Dropped LDO3 quirk. arch/arm/dts/Makefile | 1 + board/sunxi/MAINTAINERS | 5 +++++ configs/pinecube_defconfig | 15 +++++++++++++++ 3 files changed, 21 insertions(+) create mode 100644 configs/pinecube_defconfig