From patchwork Fri Oct 16 10:46:35 2020
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Pratyush Yadav
X-Patchwork-Id: 1383232
X-Patchwork-Delegate: trini@ti.com
Return-Path:
X-Original-To: incoming@patchwork.ozlabs.org
Delivered-To: patchwork-incoming@bilbo.ozlabs.org
Authentication-Results: ozlabs.org;
spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
(client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
envelope-from=u-boot-bounces@lists.denx.de; receiver=)
Authentication-Results: ozlabs.org;
dmarc=pass (p=quarantine dis=none) header.from=ti.com
Authentication-Results: ozlabs.org;
dkim=pass (1024-bit key;
unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256
header.s=ti-com-17Q1 header.b=r+uSz1Ck;
dkim-atps=neutral
Received: from phobos.denx.de (phobos.denx.de
[IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
key-exchange X25519 server-signature RSA-PSS (4096 bits))
(No client certificate requested)
by ozlabs.org (Postfix) with ESMTPS id 4CCNCp5RdSz9sTK
for ; Fri, 16 Oct 2020 21:48:06 +1100 (AEDT)
Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
by phobos.denx.de (Postfix) with ESMTP id 8118182437;
Fri, 16 Oct 2020 12:47:01 +0200 (CEST)
Authentication-Results: phobos.denx.de;
dmarc=pass (p=quarantine dis=none) header.from=ti.com
Authentication-Results: phobos.denx.de;
spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
Authentication-Results: phobos.denx.de;
dkim=pass (1024-bit key;
unprotected) header.d=ti.com header.i=@ti.com header.b="r+uSz1Ck";
dkim-atps=neutral
Received: by phobos.denx.de (Postfix, from userid 109)
id 959EE8241F; Fri, 16 Oct 2020 12:46:58 +0200 (CEST)
X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
X-Spam-Level:
X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH,
DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,RCVD_IN_MSPIKE_H3,
RCVD_IN_MSPIKE_WL,SPF_HELO_NONE,URIBL_BLOCKED autolearn=ham
autolearn_force=no version=3.4.2
Received: from fllv0016.ext.ti.com (fllv0016.ext.ti.com [198.47.19.142])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by phobos.denx.de (Postfix) with ESMTPS id 4A4948241F
for ; Fri, 16 Oct 2020 12:46:54 +0200 (CEST)
Authentication-Results: phobos.denx.de;
dmarc=pass (p=quarantine dis=none) header.from=ti.com
Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=p.yadav@ti.com
Received: from lelv0265.itg.ti.com ([10.180.67.224])
by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 09GAkqIx078312;
Fri, 16 Oct 2020 05:46:52 -0500
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com;
s=ti-com-17Q1; t=1602845212;
bh=lN8Izznkx747iqJyOZewm2wD+2M4qiHgzAcfXS5S3/g=;
h=From:To:CC:Subject:Date:In-Reply-To:References;
b=r+uSz1CkX7Q9k5dFGFRlnp+uvFHvjwuB77mq2PD6xa0OpdPWkcDt7ET+tg8P4C7As
j2v6xdgCI34XDotiJCkUbnEIOXP7yTIAgbjbEhXtDK2Er8VxzkSAlL04JKulybNSo4
ADXv2C9ktTAxv9m+BrxyLzbDc6UI8Z70/Uxy4Wc0=
Received: from DLEE109.ent.ti.com (dlee109.ent.ti.com [157.170.170.41])
by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 09GAkqWG121815
(version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL);
Fri, 16 Oct 2020 05:46:52 -0500
Received: from DLEE110.ent.ti.com (157.170.170.21) by DLEE109.ent.ti.com
(157.170.170.41) with Microsoft SMTP Server (version=TLS1_2,
cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Fri, 16
Oct 2020 05:46:51 -0500
Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE110.ent.ti.com
(157.170.170.21) with Microsoft SMTP Server (version=TLS1_2,
cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via
Frontend Transport; Fri, 16 Oct 2020 05:46:51 -0500
Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com
[10.172.224.153])
by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 09GAkbSi016923;
Fri, 16 Oct 2020 05:46:50 -0500
From: Pratyush Yadav
To: Tom Rini
CC: Pratyush Yadav , , Simon Glass
, Vignesh Raghavendra
Subject: [PATCH v4 6/7] cmd: Add a mux command
Date: Fri, 16 Oct 2020 16:16:35 +0530
Message-ID: <20201016104636.14138-7-p.yadav@ti.com>
X-Mailer: git-send-email 2.28.0
In-Reply-To: <20201016104636.14138-1-p.yadav@ti.com>
References: <20201016104636.14138-1-p.yadav@ti.com>
MIME-Version: 1.0
X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180
X-BeenThere: u-boot@lists.denx.de
X-Mailman-Version: 2.1.34
Precedence: list
List-Id: U-Boot discussion
List-Unsubscribe: ,
List-Archive:
List-Post:
List-Help:
List-Subscribe: ,
Errors-To: u-boot-bounces@lists.denx.de
Sender: "U-Boot"
X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de
X-Virus-Status: Clean
This command lets the user list, select, and deselect mux controllers
introduced with the mux framework on the fly. It has 3 subcommands:
list, select, and deselect.
List: Lists all the mux present on the system. The muxes are listed for
each chip. The chip is identified by its device name. Each chip can have
a number of mux controllers. Each is listed in sequence and is assigned
a sequential ID based on its position in the mux chip. It lists details
like ID, whether the mux is currently selected or not, the current
state, the idle state, and the number of states.
A sample output would look something like:
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 no unknown as-is 0x4
1 no 0x2 0x2 0x10
2 no 0x73 0x73 0x100
another-mux-controller:
ID Selected Current State Idle State Num States
0 no 0x1 0x1 0x4
1 no 0x2 0x2 0x4
Select: Selects a given mux and puts it in the specified state. This
subcommand takes 3 arguments: mux chip, mux ID, state to set
the mux in. The arguments mux chip and mux ID are used to identify which
mux needs to be selected, and then it is selected to the given state.
The mux needs to be deselected before it can be selected again in
another state. The state should be a hexadecimal number.
For example:
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 no 0x1 0x1 0x4
1 no 0x1 0x1 0x4
=> mux select a-mux-controller 0 0x3
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 yes 0x3 0x1 0x4
1 no 0x1 0x1 0x4
Deselect: Deselects a given mux and puts it in its idle state. This
subcommand takes 2 arguments: the mux chip and mux ID to identify which
mux needs to be deselected. So in the above example, we can deselect mux
0 using:
=> mux deselect a-mux-controller 0
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 no 0x1 0x1 0x4
1 no 0x1 0x1 0x4
Signed-off-by: Pratyush Yadav
Reviewed-by: Simon Glass
---
Notes:
Changes in v4:
- Use spaces to print columns in 'mux list' instead of tabs. Tabs don't
work well with ut_assert_nextline() because it calls
membuff_readline() down the call chain and tells it to consider
characters below the space character as EOL. This means
ut_assert_nextline() can only assert for the next column not the next
line if a command is using tabs.
cmd/Kconfig | 6 ++
cmd/Makefile | 1 +
cmd/mux.c | 183 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 190 insertions(+)
create mode 100644 cmd/mux.c
diff --git a/cmd/Kconfig b/cmd/Kconfig
index a3166e4f31..a25d6d62d0 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1073,6 +1073,12 @@ config CMD_MTD
help
MTD commands support.
+config CMD_MUX
+ bool "mux"
+ depends on MULTIPLEXER
+ help
+ List, select, and deselect mux controllers on the fly.
+
config CMD_NAND
bool "nand"
default y if NAND_SUNXI
diff --git a/cmd/Makefile b/cmd/Makefile
index 19a891633f..79a57b8482 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -104,6 +104,7 @@ obj-$(CONFIG_CMD_CLONE) += clone.o
ifneq ($(CONFIG_CMD_NAND)$(CONFIG_CMD_SF),)
obj-y += legacy-mtd-utils.o
endif
+obj-$(CONFIG_CMD_MUX) += mux.o
obj-$(CONFIG_CMD_NAND) += nand.o
obj-$(CONFIG_CMD_NET) += net.o
obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o
diff --git a/cmd/mux.c b/cmd/mux.c
new file mode 100644
index 0000000000..3a0839ec1f
--- /dev/null
+++ b/cmd/mux.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * List, select, and deselect mux controllers on the fly.
+ *
+ * Copyright (c) 2020 Texas Instruments Inc.
+ * Author: Pratyush Yadav
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define COLUMN_SIZE 16
+
+/*
+ * Print a member of a column. The total size of the text printed, including
+ * trailing whitespace, will always be COLUMN_SIZE.
+ */
+#define PRINT_COLUMN(fmt, args...) do { \
+ char buf[COLUMN_SIZE + 1]; \
+ snprintf(buf, COLUMN_SIZE + 1, fmt, ##args); \
+ printf("%-*s", COLUMN_SIZE, buf); \
+} while (0)
+
+/*
+ * Find a mux based on its device name in argv[1] and index in the chip in
+ * argv[2].
+ */
+static struct mux_control *cmd_mux_find(char *const argv[])
+{
+ struct udevice *dev;
+ struct mux_chip *chip;
+ int ret;
+ unsigned long id;
+
+ ret = strict_strtoul(argv[2], 10, &id);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = uclass_get_device_by_name(UCLASS_MUX, argv[1], &dev);
+ if (ret)
+ return ERR_PTR(ret);
+
+ chip = dev_get_uclass_priv(dev);
+ if (!chip)
+ return ERR_PTR(ret);
+
+ if (id >= chip->controllers)
+ return ERR_PTR(-EINVAL);
+
+ return &chip->mux[id];
+}
+
+/*
+ * Print the details of a mux. The columns printed correspond to: "Selected",
+ * "Current State", "Idle State", and "Num States".
+ */
+static void print_mux(struct mux_control *mux)
+{
+ PRINT_COLUMN("%s", mux->in_use ? "yes" : "no");
+
+ if (mux->cached_state == MUX_IDLE_AS_IS)
+ PRINT_COLUMN("%s", "unknown");
+ else
+ PRINT_COLUMN("0x%x", mux->cached_state);
+
+ if (mux->idle_state == MUX_IDLE_AS_IS)
+ PRINT_COLUMN("%s", "as-is");
+ else if (mux->idle_state == MUX_IDLE_DISCONNECT)
+ PRINT_COLUMN("%s", "disconnect");
+ else
+ PRINT_COLUMN("0x%x", mux->idle_state);
+
+ PRINT_COLUMN("0x%x", mux->states);
+
+ printf("\n");
+}
+
+static int do_mux_list(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct udevice *dev;
+ struct mux_chip *chip;
+ int j;
+
+ for (uclass_first_device(UCLASS_MUX, &dev);
+ dev;
+ uclass_next_device(&dev)) {
+ chip = dev_get_uclass_priv(dev);
+ if (!chip) {
+ dev_err(dev, "can't find mux chip\n");
+ continue;
+ }
+
+ printf("%s:\n", dev->name);
+
+ printf(" ");
+ PRINT_COLUMN("ID");
+ PRINT_COLUMN("Selected");
+ PRINT_COLUMN("Current State");
+ PRINT_COLUMN("Idle State");
+ PRINT_COLUMN("Num States");
+ printf("\n");
+ for (j = 0; j < chip->controllers; j++) {
+ printf(" ");
+ PRINT_COLUMN("%d", j);
+ print_mux(&chip->mux[j]);
+ }
+ printf("\n");
+ }
+
+ return 0;
+}
+
+static int do_mux_select(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct mux_control *mux;
+ int ret;
+ unsigned long state;
+
+ if (argc != 4)
+ return CMD_RET_USAGE;
+
+ mux = cmd_mux_find(argv);
+ if (IS_ERR_OR_NULL(mux)) {
+ printf("Failed to find the specified mux\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = strict_strtoul(argv[3], 16, &state);
+ if (ret) {
+ printf("Invalid state\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = mux_control_select(mux, state);
+ if (ret) {
+ printf("Failed to select requested state\n");
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_mux_deselect(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct mux_control *mux;
+ int ret;
+
+ if (argc != 3)
+ return CMD_RET_USAGE;
+
+ mux = cmd_mux_find(argv);
+ if (IS_ERR_OR_NULL(mux)) {
+ printf("Failed to find the specified mux\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = mux_control_deselect(mux);
+ if (ret) {
+ printf("Failed to deselect mux\n");
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+static char mux_help_text[] =
+ "list - List all Muxes and their states\n"
+ "select - Select the given mux state\n"
+ "deselect - Deselect the given mux and reset it to its idle state";
+
+U_BOOT_CMD_WITH_SUBCMDS(mux, "List, select, and deselect muxes", mux_help_text,
+ U_BOOT_SUBCMD_MKENT(list, 1, 1, do_mux_list),
+ U_BOOT_SUBCMD_MKENT(select, 4, 0, do_mux_select),
+ U_BOOT_SUBCMD_MKENT(deselect, 3, 0, do_mux_deselect));