diff mbox series

[PATCHv6,16/18] dts: powerpc: p2020rdb: Add eTSEC DT nodes

Message ID 20200922092347.19141-17-Zhiqiang.Hou@nxp.com
State Not Applicable
Delegated to: Priyanka Jain
Headers show
Series powerpc: convert p1010, p1020 and p2020 RDB boards to DM_ETH | expand

Commit Message

Z.Q. Hou Sept. 22, 2020, 9:23 a.m. UTC 
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

P2020RDB implements 3 enhanced three-speed Ethernet controllers,
and the connection is shown below:
    eTSEC1: Connected to RGMII switch VSC7385
    eTSEC2: Connected to SGMII PHY VSC8221
    eTSEC3: Connected to SGMII PHY AR8021

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
V6:
 - No change.

 arch/powerpc/dts/p2020-post.dtsi     |  8 +++--
 arch/powerpc/dts/p2020rdb-pc.dts     |  1 +
 arch/powerpc/dts/p2020rdb-pc.dtsi    | 50 ++++++++++++++++++++++++++++
 arch/powerpc/dts/p2020rdb-pc_36b.dts |  1 +
 arch/powerpc/dts/pq3-etsec1-0.dtsi   | 28 ++++++++++++++++
 arch/powerpc/dts/pq3-etsec1-1.dtsi   | 28 ++++++++++++++++
 arch/powerpc/dts/pq3-etsec1-2.dtsi   | 28 ++++++++++++++++
 arch/powerpc/dts/pq3-etsec1-3.dtsi   | 28 ++++++++++++++++
 8 files changed, 170 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi
diff mbox series

Patch

diff --git a/arch/powerpc/dts/p2020-post.dtsi b/arch/powerpc/dts/p2020-post.dtsi
index 4ed093dad4..11945295d1 100644
--- a/arch/powerpc/dts/p2020-post.dtsi
+++ b/arch/powerpc/dts/p2020-post.dtsi
@@ -38,8 +38,12 @@ 
 		clock-frequency = <0>;
 	};
 
-	/include/ "pq3-i2c-0.dtsi"
-	/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
 };
 
 /* PCIe controller base address 0x8000 */
diff --git a/arch/powerpc/dts/p2020rdb-pc.dts b/arch/powerpc/dts/p2020rdb-pc.dts
index 08befd4c59..f3f6be1080 100644
--- a/arch/powerpc/dts/p2020rdb-pc.dts
+++ b/arch/powerpc/dts/p2020rdb-pc.dts
@@ -37,4 +37,5 @@ 
 	};
 };
 
+/include/ "p2020rdb-pc.dtsi"
 /include/ "p2020-post.dtsi"
diff --git a/arch/powerpc/dts/p2020rdb-pc.dtsi b/arch/powerpc/dts/p2020rdb-pc.dtsi
new file mode 100644
index 0000000000..0d2acc746e
--- /dev/null
+++ b/arch/powerpc/dts/p2020rdb-pc.dtsi
@@ -0,0 +1,50 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ */
+
+&soc {
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+			};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+			};
+	};
+
+	mdio@25520 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		status = "disabled";
+	};
+
+	enet0: ethernet@24000 {
+		phy-connection-type = "rgmii-id";
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@26000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/dts/p2020rdb-pc_36b.dts b/arch/powerpc/dts/p2020rdb-pc_36b.dts
index 04b2519e1a..6d983b7d71 100644
--- a/arch/powerpc/dts/p2020rdb-pc_36b.dts
+++ b/arch/powerpc/dts/p2020rdb-pc_36b.dts
@@ -37,4 +37,5 @@ 
 	};
 };
 
+/include/ "p2020rdb-pc.dtsi"
 /include/ "p2020-post.dtsi"
diff --git a/arch/powerpc/dts/pq3-etsec1-0.dtsi b/arch/powerpc/dts/pq3-etsec1-0.dtsi
new file mode 100644
index 0000000000..8800243f34
--- /dev/null
+++ b/arch/powerpc/dts/pq3-etsec1-0.dtsi
@@ -0,0 +1,28 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ */
+
+ethernet@24000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x24000 0x1000>;
+	ranges = <0x0 0x24000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-mdio";
+	reg = <0x24520 0x20>;
+};
diff --git a/arch/powerpc/dts/pq3-etsec1-1.dtsi b/arch/powerpc/dts/pq3-etsec1-1.dtsi
new file mode 100644
index 0000000000..2bc62d1a57
--- /dev/null
+++ b/arch/powerpc/dts/pq3-etsec1-1.dtsi
@@ -0,0 +1,28 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ */
+
+ethernet@25000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x25000 0x1000>;
+	ranges = <0x0 0x25000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x25520 0x20>;
+};
diff --git a/arch/powerpc/dts/pq3-etsec1-2.dtsi b/arch/powerpc/dts/pq3-etsec1-2.dtsi
new file mode 100644
index 0000000000..d45865fe03
--- /dev/null
+++ b/arch/powerpc/dts/pq3-etsec1-2.dtsi
@@ -0,0 +1,28 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ */
+
+ethernet@26000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <2>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x26000 0x1000>;
+	ranges = <0x0 0x26000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x26520 0x20>;
+};
diff --git a/arch/powerpc/dts/pq3-etsec1-3.dtsi b/arch/powerpc/dts/pq3-etsec1-3.dtsi
new file mode 100644
index 0000000000..853a27359d
--- /dev/null
+++ b/arch/powerpc/dts/pq3-etsec1-3.dtsi
@@ -0,0 +1,28 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
+ */
+
+ethernet@27000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <3>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x27000 0x1000>;
+	ranges = <0x0 0x27000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x27520 0x20>;
+};