diff mbox series

[v3,2/2] allow opting out of WATCHDOG_RESET() from timer interrupt

Message ID 20200320105248.24518-2-rasmus.villemoes@prevas.dk
State Superseded
Delegated to: Mario Six
Headers show
Series [v3,1/2] timer: mpc83xx_timer: fix build with CONFIG_{HW_, }WATCHDOG | expand

Commit Message

Rasmus Villemoes March 20, 2020, 10:52 a.m. UTC 
When using CONFIG_(SPL_)WDT, the watchdog_reset function is a lot more
complicated than just poking a few SOC-specific registers - it
involves accessing all kinds of global data, and if the interrupt
happens at the wrong time (say, in the middle of an WATCHDOG_RESET()
call from ordinary code), that can end up corrupting said global data.

Also, having WATCHDOG_RESET() called automatically from the timer
interrupt runs counter to the idea of a watchdog device - if the board
runs into an infinite loops with interrupts still enabled, the
watchdog will never fire.

Allow the board to opt out of this behaviour by setting
CONFIG_SYS_WATCHDOG_FREQ to 0 - as that setting is currently
nonsensical, it cannot affect any existing boards.

Add documentation for both the existing and extended meaning of
CONFIG_SYS_WATCHDOG_FREQ.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 README                        | 9 +++++++++
 arch/m68k/lib/time.c          | 2 +-
 arch/powerpc/lib/interrupts.c | 2 +-
 drivers/timer/mpc83xx_timer.c | 2 +-
 4 files changed, 12 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/README b/README
index 8cfa92fac9..79e8da4adc 100644
--- a/README
+++ b/README
@@ -768,6 +768,15 @@  The following options need to be configured:
 		SoC, then define this variable and provide board
 		specific code for the "hw_watchdog_reset" function.
 
+		CONFIG_SYS_WATCHDOG_FREQ
+		Some platforms automatically call WATCHDOG_RESET()
+		from the timer interrupt handler every
+		CONFIG_SYS_WATCHDOG_FREQ interrupts. If not set by the
+		board configuration file, a default of CONFIG_SYS_HZ/2
+		(i.e. 500) is used. Setting CONFIG_SYS_WATCHDOG_FREQ
+		to 0 disables calling WATCHDOG_RESET() from the timer
+		interrupt.
+
 - Real-Time Clock:
 
 		When CONFIG_CMD_DATE is selected, the type of the RTC
diff --git a/arch/m68k/lib/time.c b/arch/m68k/lib/time.c
index bde1f4c228..038019ff36 100644
--- a/arch/m68k/lib/time.c
+++ b/arch/m68k/lib/time.c
@@ -68,7 +68,7 @@  void dtimer_interrupt(void *not_used)
 		timestamp++;
 
 		#if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
-		if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0) {
+		if (CONFIG_SYS_WATCHDOG_FREQ && (timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0) {
 			WATCHDOG_RESET ();
 		}
 		#endif    /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
diff --git a/arch/powerpc/lib/interrupts.c b/arch/powerpc/lib/interrupts.c
index 64ee0cc210..23ac5bca1e 100644
--- a/arch/powerpc/lib/interrupts.c
+++ b/arch/powerpc/lib/interrupts.c
@@ -79,7 +79,7 @@  void timer_interrupt(struct pt_regs *regs)
 	timestamp++;
 
 #if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
-	if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
+	if (CONFIG_SYS_WATCHDOG_FREQ && (timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
 		WATCHDOG_RESET ();
 #endif    /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
 
diff --git a/drivers/timer/mpc83xx_timer.c b/drivers/timer/mpc83xx_timer.c
index da516c9d74..b85f10ad99 100644
--- a/drivers/timer/mpc83xx_timer.c
+++ b/drivers/timer/mpc83xx_timer.c
@@ -171,7 +171,7 @@  void timer_interrupt(struct pt_regs *regs)
 	priv->timestamp++;
 
 #if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
-	if ((priv->timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
+	if (CONFIG_SYS_WATCHDOG_FREQ && (priv->timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
 		WATCHDOG_RESET();
 #endif    /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */