diff mbox series

[U-Boot,v2,02/10] apalis-tk1: set apalis gpio 8 aka fan_en

Message ID 20190805151244.28732-3-igor.opaniuk@gmail.com
State Superseded
Headers show
Series apalis-tk1: fixes/updates for v2019.10 | expand

Commit Message

Igor Opaniuk Aug. 5, 2019, 3:12 p.m. UTC 
From: Igor Opaniuk <igor.opaniuk@toradex.com>

Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1
modules.

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
---

 board/toradex/apalis-tk1/apalis-tk1.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c
index b87e9e7a3e..d57c5042dd 100644
--- a/board/toradex/apalis-tk1/apalis-tk1.c
+++ b/board/toradex/apalis-tk1/apalis-tk1.c
@@ -19,6 +19,7 @@ 
 
 #define LAN_DEV_OFF_N	TEGRA_GPIO(O, 6)
 #define LAN_RESET_N	TEGRA_GPIO(S, 2)
+#define FAN_EN		TEGRA_GPIO(DD, 2)
 #define LAN_WAKE_N	TEGRA_GPIO(O, 5)
 #ifdef CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT
 #define PEX_PERST_N	TEGRA_GPIO(DD, 1) /* Apalis GPIO7 */
@@ -241,6 +242,15 @@  void tegra_pcie_board_port_reset(struct tegra_pcie_port *port)
 }
 #endif /* CONFIG_PCI_TEGRA */
 
+/*
+ * Enable/start PWM CPU fan
+ */
+void start_cpu_fan(void)
+{
+	gpio_request(FAN_EN, "FAN_EN");
+	gpio_direction_output(FAN_EN, 1);
+}
+
 /*
  * Backlight off before OS handover
  */