From patchwork Mon Jul 29 14:01:56 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 1138385 X-Patchwork-Delegate: narmstrong@baylibre.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.denx.de (client-ip=81.169.180.215; helo=lists.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=baylibre-com.20150623.gappssmtp.com header.i=@baylibre-com.20150623.gappssmtp.com header.b="YWyKyXOd"; dkim-atps=neutral Received: from lists.denx.de (dione.denx.de [81.169.180.215]) by ozlabs.org (Postfix) with ESMTP id 45y1c56D6kz9sBt for ; Tue, 30 Jul 2019 00:03:01 +1000 (AEST) Received: by lists.denx.de (Postfix, from userid 105) id 52116C21E18; Mon, 29 Jul 2019 14:02:50 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on lists.denx.de X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=RCVD_IN_MSPIKE_H2, T_DKIM_INVALID,WEIRD_PORT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from lists.denx.de (localhost [IPv6:::1]) by lists.denx.de (Postfix) with ESMTP id 5B539C21E15; Mon, 29 Jul 2019 14:02:20 +0000 (UTC) Received: by lists.denx.de (Postfix, from userid 105) id 10667C21E38; Mon, 29 Jul 2019 14:02:10 +0000 (UTC) Received: from mail-wr1-f67.google.com (mail-wr1-f67.google.com [209.85.221.67]) by lists.denx.de (Postfix) with ESMTPS id 6EC60C21DF9 for ; Mon, 29 Jul 2019 14:02:07 +0000 (UTC) Received: by mail-wr1-f67.google.com with SMTP id n4so62072412wrs.3 for ; Mon, 29 Jul 2019 07:02:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=Lk5+d1YJGA0NPgXjAk9kb3oikbdPgWanFznPmvPy0hA=; b=YWyKyXOd5y44ljZfqFbKywq4d22x2ZWnhFWZVHFdjRZpuh1FDpG3qi+dRyaq5Uh4ub a3Wy7xbu+CY2gdbxydsU6bRodPD4NeyTRZjFQbku3jtuOjqem60/ArSxCe46LTC7gG7p niDGQku3rasC02AI03e2q9BfEaUyuYS7Kwz+N+bYjGEZZnr8j+pE37zMKo/pi2aC9rtC m9e/x+RMb1JjnngN+8vjAapQsPvlUO9ScXlGq/yGpZleHwKegqNfOAGpm/hmuMyylci2 f8SBbCoZ5KjZGu3jQD08p0ZxGO4BT1VbjSLHFFicKii/96wERdzHEz8djSJdGWsxl3OJ nexg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=Lk5+d1YJGA0NPgXjAk9kb3oikbdPgWanFznPmvPy0hA=; b=C9mgyPel07FLxhR0P6TQ1P1/j7x7uVcjm0oesxa58iKvG5Li75LA/peQT41cGq+wWe Z2VWah79g6cMZo0p4X/jo1fkYQu4usi3KGotV4OX95fEnyGnvzKqNieWDxv+cZQPeKng TCA8EwLcFu3grs9AipNQpW8FTe2zSCoRH321imyMZIGkgoO1H0AjLjL14GiURkWgy139 Gmh6swLqf/uZHG7LJugq84IrLen6QuT0ZCaVrXxnnGo7aRFuQxzNmqIjyhRu/wy+mrrp e9giHBETMTmJwivCsCDZNVrvJcXpvc6Vspc9hDKNUEeZ8kXxdpqU05/Lk9wWYd8NpOq/ Q3jQ== X-Gm-Message-State: APjAAAV9fPXeNaPSr8Y5YKENBnc+3tlu3d4qLL+o1n0omVq0LiVdilno 2gUNa9QngYlaIncn4Q3STPpCtfRxuGc= X-Google-Smtp-Source: APXvYqy0fKEPD1JYjxedKmMnZL+ZUKq2foZEixDkxqO1gfspSol8dfZuxgsbpwkif6JEcnnD4UJDDQ== X-Received: by 2002:adf:e4cc:: with SMTP id v12mr121285950wrm.22.1564408926543; Mon, 29 Jul 2019 07:02:06 -0700 (PDT) Received: from bender.baylibre.local (lmontsouris-657-1-212-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.gmail.com with ESMTPSA id f70sm79397528wme.22.2019.07.29.07.02.05 (version=TLS1_3 cipher=AEAD-AES256-GCM-SHA384 bits=256/256); Mon, 29 Jul 2019 07:02:06 -0700 (PDT) From: Neil Armstrong To: u-boot@lists.denx.de Date: Mon, 29 Jul 2019 16:01:56 +0200 Message-Id: <20190729140158.6954-4-narmstrong@baylibre.com> X-Mailer: git-send-email 2.22.0 In-Reply-To: <20190729140158.6954-1-narmstrong@baylibre.com> References: <20190729140158.6954-1-narmstrong@baylibre.com> MIME-Version: 1.0 Cc: u-boot-amlogic@groups.io Subject: [U-Boot] [PATCH 3/5] boards: meson: add g12a sei510 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.18 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" From: Jerome Brunet The SEI510 board is based on the Amlogic S905X2 SoC from the Amlogic G12A SoC family. The board has the following specifications : - Amlogic S905X2 ARM Cortex-A53 quad-core SoC - XGB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - eMMC - SDcard - Infrared receiver - SDIO WiFi Module The board default behaviour is for booting Android and triggers fastboot on recovery or reboot mode. USB vendor ID (used by fastboot) is 0x18d1 (Google) for default udev rules for existing android users work out of the box. Signed-off-by: Kevin Hilman Signed-off-by: Jerome Brunet Signed-off-by: Guillaume La Roque --- arch/arm/include/asm/arch-meson/sm.h | 18 ++++ arch/arm/mach-meson/sm.c | 155 +++++++++++++++++++++++++++ board/amlogic/sei510/MAINTAINERS | 5 + board/amlogic/sei510/Makefile | 6 ++ board/amlogic/sei510/README | 123 +++++++++++++++++++++ board/amlogic/sei510/sei510.c | 26 +++++ configs/sei510_defconfig | 74 +++++++++++++ include/configs/sei510.h | 137 +++++++++++++++++++++++ 8 files changed, 544 insertions(+) create mode 100644 board/amlogic/sei510/MAINTAINERS create mode 100644 board/amlogic/sei510/Makefile create mode 100644 board/amlogic/sei510/README create mode 100644 board/amlogic/sei510/sei510.c create mode 100644 configs/sei510_defconfig create mode 100644 include/configs/sei510.h diff --git a/arch/arm/include/asm/arch-meson/sm.h b/arch/arm/include/asm/arch-meson/sm.h index 60d04ae228..6ae52cc584 100644 --- a/arch/arm/include/asm/arch-meson/sm.h +++ b/arch/arm/include/asm/arch-meson/sm.h @@ -6,7 +6,25 @@ #ifndef __MESON_SM_H__ #define __MESON_SM_H__ +enum { + REBOOT_REASON_COLD = 0, + REBOOT_REASON_NORMAL = 1, + REBOOT_REASON_RECOVERY = 2, + REBOOT_REASON_UPDATE = 3, + REBOOT_REASON_FASTBOOT = 4, + REBOOT_REASON_SUSPEND_OFF = 5, + REBOOT_REASON_HIBERNATE = 6, + REBOOT_REASON_BOOTLOADER = 7, + REBOOT_REASON_SHUTDOWN_REBOOT = 8, + REBOOT_REASON_RPMBP = 9, + REBOOT_REASON_CRASH_DUMP = 11, + REBOOT_REASON_KERNEL_PANIC = 12, + REBOOT_REASON_WATCHDOG_REBOOT = 13, +}; + ssize_t meson_sm_read_efuse(uintptr_t offset, void *buffer, size_t size); +int meson_sm_get_serial(void *buffer, size_t size); +int meson_sm_get_reboot_reason(void); #define SM_SERIAL_SIZE 12 diff --git a/arch/arm/mach-meson/sm.c b/arch/arm/mach-meson/sm.c index 05b7f0bdf2..51a697df4a 100644 --- a/arch/arm/mach-meson/sm.c +++ b/arch/arm/mach-meson/sm.c @@ -8,6 +8,10 @@ #include #include #include +#include +#include +#include +#include #define FN_GET_SHARE_MEM_INPUT_BASE 0x82000020 #define FN_GET_SHARE_MEM_OUTPUT_BASE 0x82000021 @@ -77,3 +81,154 @@ int meson_sm_get_serial(void *buffer, size_t size) return 0; } + +#define AO_SEC_SD_CFG15 0xfc +#define REBOOT_REASON_MASK GENMASK(15, 12) + +int meson_sm_get_reboot_reason(void) +{ + struct regmap *regmap; + int nodeoffset; + ofnode node; + unsigned int reason; + + /* find the offset of compatible node */ + nodeoffset = fdt_node_offset_by_compatible(gd->fdt_blob, -1, + "amlogic,meson-gx-ao-secure"); + if (nodeoffset < 0) { + printf("%s: failed to get amlogic,meson-gx-ao-secure\n", + __func__); + return -ENODEV; + } + + /* get regmap from the syscon node */ + node = offset_to_ofnode(nodeoffset); + regmap = syscon_node_to_regmap(node); + if (IS_ERR(regmap)) { + printf("%s: failed to get regmap\n", __func__); + return -EINVAL; + } + + regmap_read(regmap, AO_SEC_SD_CFG15, &reason); + + /* The SMC call is not used, we directly use AO_SEC_SD_CFG15 */ + return FIELD_GET(REBOOT_REASON_MASK, reason); +} + +static int do_sm_serial(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + ulong address; + int ret; + + if (argc < 2) + return CMD_RET_USAGE; + + address = simple_strtoul(argv[1], NULL, 0); + + ret = meson_sm_get_serial((void *)address, SM_CHIP_ID_SIZE); + if (ret) + return CMD_RET_FAILURE; + + return CMD_RET_SUCCESS; +} + +#define MAX_REBOOT_REASONS 14 + +static const char *reboot_reasons[MAX_REBOOT_REASONS] = { + [REBOOT_REASON_COLD] = "cold_boot", + [REBOOT_REASON_NORMAL] = "normal", + [REBOOT_REASON_RECOVERY] = "recovery", + [REBOOT_REASON_UPDATE] = "update", + [REBOOT_REASON_FASTBOOT] = "fastboot", + [REBOOT_REASON_SUSPEND_OFF] = "suspend_off", + [REBOOT_REASON_HIBERNATE] = "hibernate", + [REBOOT_REASON_BOOTLOADER] = "bootloader", + [REBOOT_REASON_SHUTDOWN_REBOOT] = "shutdown_reboot", + [REBOOT_REASON_RPMBP] = "rpmbp", + [REBOOT_REASON_CRASH_DUMP] = "crash_dump", + [REBOOT_REASON_KERNEL_PANIC] = "kernel_panic", + [REBOOT_REASON_WATCHDOG_REBOOT] = "watchdog_reboot", +}; + +static int do_sm_reboot_reason(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + const char *reason_str; + char *destarg = NULL; + int reason; + + if (argc > 1) + destarg = argv[1]; + + reason = meson_sm_get_reboot_reason(); + if (reason < 0) + return CMD_RET_FAILURE; + + if (reason >= MAX_REBOOT_REASONS || + !reboot_reasons[reason]) + reason_str = "unknown"; + else + reason_str = reboot_reasons[reason]; + + if (destarg) + env_set(destarg, reason_str); + else + printf("reboot reason: %s (%x)\n", reason_str, reason); + + return CMD_RET_SUCCESS; +} + +static int do_sm_efuse_read(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + ulong offset; + ulong size; + ulong dest; + + if (argc < 4) + return CMD_RET_FAILURE; + + offset = simple_strtoul(argv[1], NULL, 0); + size = simple_strtoul(argv[2], NULL, 0); + dest = simple_strtoul(argv[3], NULL, 0); + + if (meson_sm_read_efuse(offset, (void *)dest, size) != -1) + return CMD_RET_SUCCESS; + + return CMD_RET_FAILURE; +} + +static cmd_tbl_t cmd_sm_sub[] = { + U_BOOT_CMD_MKENT(serial, 2, 1, do_sm_serial, "", ""), + U_BOOT_CMD_MKENT(reboot_reason, 1, 1, do_sm_reboot_reason, "", ""), + U_BOOT_CMD_MKENT(efuse_read, 4, 1, do_sm_efuse_read, "", ""), +}; + +static int do_sm(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + cmd_tbl_t *c; + + if (argc < 2) + return CMD_RET_USAGE; + + /* Strip off leading 'sm' command argument */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], &cmd_sm_sub[0], ARRAY_SIZE(cmd_sm_sub)); + + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return CMD_RET_USAGE; +} + +U_BOOT_CMD( + sm, 5, 0, do_sm, + "Secure Monitor Control", + "serial
- read chip unique id to memory address\n" + "sm reboot_reason [name] - get reboot reason and store to to environment\n" + "sm efuse_read
- read length bytes from efuse offset to memory address" +); diff --git a/board/amlogic/sei510/MAINTAINERS b/board/amlogic/sei510/MAINTAINERS new file mode 100644 index 0000000000..792ae22176 --- /dev/null +++ b/board/amlogic/sei510/MAINTAINERS @@ -0,0 +1,5 @@ +U200 +M: Neil Armstrong +S: Maintained +F: board/amlogic/sei510/ +F: configs/sei510_defconfig diff --git a/board/amlogic/sei510/Makefile b/board/amlogic/sei510/Makefile new file mode 100644 index 0000000000..03399a3849 --- /dev/null +++ b/board/amlogic/sei510/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 BayLibre, SAS +# Author: Neil Armstrong + +obj-y := sei510.o diff --git a/board/amlogic/sei510/README b/board/amlogic/sei510/README new file mode 100644 index 0000000000..216ff06093 --- /dev/null +++ b/board/amlogic/sei510/README @@ -0,0 +1,123 @@ +U-Boot for Amlogic SEI510 +======================= + +SEI510 is a custemer board manufactured by SEI Robotics with the following +specifications: + + - Amlogic S905X2 ARM Cortex-A53 quad-core SoC + - 2GB DDR4 SDRAM + - 10/100 Ethernet (Internal PHY) + - 1 x USB 3.0 Host + - eMMC + - SDcard + - Infrared receiver + - SDIO WiFi Module + +Currently the u-boot port supports the following devices: + - serial + - Ethernet + - Regulators + - Clock controller + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make sei510_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + > cd amlogic-u-boot + > make g12a_u200_v1_defconfig + > make + > export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz + > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ + > cp $FIPDIR/g12a/ddr3_1d.fw fip/ + > cp $FIPDIR/g12a/ddr4_1d.fw fip/ + > cp $FIPDIR/g12a/ddr4_2d.fw fip/ + > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ + > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ + > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ + > cp $FIPDIR/g12a/piei.fw fip/ + > cp u-boot.bin fip/bl33.bin + + > sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --level v3 + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/sei510/sei510.c b/board/amlogic/sei510/sei510.c new file mode 100644 index 0000000000..a92fccd3fd --- /dev/null +++ b/board/amlogic/sei510/sei510.c @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 BayLibre, SAS + * Author: Neil Armstrong + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int misc_init_r(void) +{ + meson_eth_init(PHY_INTERFACE_MODE_RMII, + MESON_USE_INTERNAL_RMII_PHY); + + meson_generate_serial_ethaddr(); + + env_set("serial#", "AMLG12ASEI510"); + + return 0; +} diff --git a/configs/sei510_defconfig b/configs/sei510_defconfig new file mode 100644 index 0000000000..20534bd6b4 --- /dev/null +++ b/configs/sei510_defconfig @@ -0,0 +1,74 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="sei510" +CONFIG_SYS_BOARD="sei510" +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" sei510" +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_FDT=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_LZ4=y +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-sei510" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_ADDR=8 +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_MESON=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_PHY=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_DM_USB=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_FASTBOOT=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x6000000 +CONFIG_CMD_FASTBOOT=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_USB_GADGET_VENDOR_NUM=0x18d1 +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_OF_LIBFDT=y +CONFIG_EFI_PARTITION=y +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_CMD_GPT=y +CONFIG_CMD_PART=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=2 diff --git a/include/configs/sei510.h b/include/configs/sei510.h new file mode 100644 index 0000000000..9957902250 --- /dev/null +++ b/include/configs/sei510.h @@ -0,0 +1,137 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration for the SEI510 + * + * Copyright (C) 2019 Baylibre, SAS + * Author: Jerome Brunet + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SYS_MMC_ENV_DEV 2 +#define CONFIG_SYS_MMC_ENV_PART 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_OFFSET (-0x10000) + +#define CACHE_UUID "99207ae6-5207-11e9-999e-6f77a3612069;" +#define SYSTEM_UUID "99f9b7ac-5207-11e9-8507-c3c037e393f3;" +#define VENDOR_UUID "9d082802-5207-11e9-954c-cbbce08ba108;" +#define USERDATA_UUID "9b976e42-5207-11e9-8f16-ff47ac594b22;" +#define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;" + +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=boot,size=64M,bootable,uuid=${uuid_gpt_boot};" \ + "name=cache,size=256M,uuid=" CACHE_UUID \ + "name=system,size=1536M,uuid=" SYSTEM_UUID \ + "name=vendor,size=256M,uuid=" VENDOR_UUID \ + "name=userdata,size=4746M,uuid=" USERDATA_UUID \ + "name=rootfs,size=-,uuid=" ROOT_UUID + +#define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \ + "bootcmd_fastboot=" \ + "sm reboot_reason reason;" \ + "setenv run_fastboot 0;" \ + "if gpt verify mmc ${mmcdev} ${partitions}; then; " \ + "else " \ + "echo Broken MMC partition scheme;" \ + "setenv run_fastboot 1;" \ + "fi;" \ + "if test \"${reason}\" = \"bootloader\" -o " \ + "\"${reason}\" = \"fastboot\"; then " \ + "echo Fastboot asked by reboot reason;" \ + "setenv run_fastboot 1;" \ + "fi;" \ + "if test \"${skip_fastboot}\" -eq 1; then " \ + "echo Fastboot skipped by environment;" \ + "setenv run_fastboot 0;" \ + "fi;" \ + "if test \"${force_fastboot}\" -eq 1; then " \ + "echo Fastboot forced by environment;" \ + "setenv run_fastboot 1;" \ + "fi;" \ + "if test \"${run_fastboot}\" -eq 1; then " \ + "echo Running Fastboot...;" \ + "fastboot 0;" \ + "fi\0" + +#define BOOTENV_DEV_NAME_FASTBOOT(devtypeu, devtypel, instance) \ + "fastboot " + +/* TOFIX: Run actual recovery instead of fastboot */ +#define BOOTENV_DEV_RECOVERY(devtypeu, devtypel, instance) \ + "bootcmd_recovery=" \ + "pinmux dev pinctrl@14;" \ + "pinmux dev pinctrl@40;" \ + "sm reboot_reason reason;" \ + "setenv run_recovery 0;" \ + "if run check_button; then " \ + "echo Recovery button is pressed;" \ + "setenv run_recovery 1;" \ + "elif test \"${reason}\" = \"recovery\" -o " \ + "\"${reason}\" = \"update\"; then " \ + "echo Recovery asked by reboot reason;" \ + "setenv run_recovery 1;" \ + "fi;" \ + "if test \"${skip_recovery}\" -eq 1; then " \ + "echo Recovery skipped by environment;" \ + "setenv run_recovery 0;" \ + "fi;" \ + "if test \"${force_recovery}\" -eq 1; then " \ + "echo Recovery forced by environment;" \ + "setenv run_recovery 1;" \ + "fi;" \ + "if test \"${run_recovery}\" -eq 1; then " \ + "echo Running Recovery...;" \ + "fastboot 0;" \ + "fi\0" + +#define BOOTENV_DEV_NAME_RECOVERY(devtypeu, devtypel, instance) \ + "recovery " + +#define BOOTENV_DEV_SYSTEM(devtypeu, devtypel, instance) \ + "bootcmd_system=" \ + "echo Loading Android boot partition...;" \ + "mmc dev ${mmcdev};" \ + "setenv bootargs ${bootargs} console=${console} androidboot.serialno=${serial#};" \ + "part start mmc ${mmcdev} ${bootpart} boot_start;" \ + "part size mmc ${mmcdev} ${bootpart} boot_size;" \ + "if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \ + "echo Running Android...;" \ + "bootm ${loadaddr};" \ + "fi;" \ + "echo Failed to boot Android...;" \ + "reset\0" + +#define BOOTENV_DEV_NAME_SYSTEM(devtypeu, devtypel, instance) \ + "system " + +#define BOOT_TARGET_DEVICES(func) \ + func(ROMUSB, romusb, na) \ + func(FASTBOOT, fastboot, na) \ + func(RECOVERY, recovery, na) \ + func(SYSTEM, system, na) \ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "partitions=" PARTS_DEFAULT "\0" \ + "mmcdev=2\0" \ + "bootpart=1\0" \ + "gpio_recovery=88\0" \ + "check_button=gpio input ${gpio_recovery};test $? -eq 0;\0" \ + "console=/dev/ttyAML0\0" \ + "bootargs=no_console_suspend\0" \ + "stdin=" STDIN_CFG "\0" \ + "stdout=" STDOUT_CFG "\0" \ + "stderr=" STDOUT_CFG "\0" \ + "loadaddr=0x01000000\0" \ + "fdt_addr_r=0x01000000\0" \ + "scriptaddr=0x08000000\0" \ + "kernel_addr_r=0x01080000\0" \ + "pxefile_addr_r=0x01080000\0" \ + "ramdisk_addr_r=0x13000000\0" \ + "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" BOOTENV + +#include + +#endif /* __CONFIG_H */