@@ -113,6 +113,23 @@ config RISCV_SMODE
endchoice
+choice
+ prompt "SPL Run Mode"
+ default SPL_RISCV_MMODE
+ depends on SPL
+
+config SPL_RISCV_MMODE
+ bool "Machine"
+ help
+ Choose this option to build U-Boot SPL for RISC-V M-Mode.
+
+config SPL_RISCV_SMODE
+ bool "Supervisor"
+ help
+ Choose this option to build U-Boot SPL for RISC-V S-Mode.
+
+endchoice
+
config RISCV_ISA_C
bool "Emit compressed instructions"
default y
@@ -132,34 +149,40 @@ config 64BIT
config SIFIVE_CLINT
bool
- depends on RISCV_MMODE
+ depends on RISCV_MMODE || SPL_RISCV_MMODE
select REGMAP
select SYSCON
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
help
The SiFive CLINT block holds memory-mapped control and status registers
associated with software and timer interrupts.
config ANDES_PLIC
bool
- depends on RISCV_MMODE
+ depends on RISCV_MMODE || SPL_RISCV_MMODE
select REGMAP
select SYSCON
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
help
The Andes PLIC block holds memory-mapped claim and pending registers
associated with software interrupt.
config ANDES_PLMT
bool
- depends on RISCV_MMODE
+ depends on RISCV_MMODE || SPL_RISCV_MMODE
select REGMAP
select SYSCON
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
help
The Andes PLMT block holds memory-mapped mtime register
associated with timer tick.
config RISCV_RDTIME
bool
- default y if RISCV_SMODE
+ default y if RISCV_SMODE || SPL_RISCV_SMODE
help
The provides the riscv_get_time() API that is implemented using the
standard rdtime instruction. This is the case for S-mode U-Boot, and
@@ -189,7 +212,7 @@ config NR_CPUS
config SBI_IPI
bool
- default y if RISCV_SMODE
+ default y if RISCV_SMODE || SPL_RISCV_SMODE
depends on SMP
config XIP
@@ -4,8 +4,8 @@ config RISCV_NDS
imply CPU
imply CPU_RISCV
imply RISCV_TIMER
- imply ANDES_PLIC if RISCV_MMODE
- imply ANDES_PLMT if RISCV_MMODE
+ imply ANDES_PLIC if (RISCV_MMODE || SPL_RISCV_MMODE)
+ imply ANDES_PLMT if (RISCV_MMODE || SPL_RISCV_MMODE)
help
Run U-Boot on AndeStar V5 platforms and use some specific features
which are provided by Andes Technology AndeStar V5 families.
@@ -14,7 +14,7 @@ if RISCV_NDS
config RISCV_NDS_CACHE
bool "AndeStar V5 families specific cache support"
- depends on RISCV_MMODE
+ depends on RISCV_MMODE || SPL_RISCV_MMODE
help
Provide Andes Technology AndeStar V5 families specific cache support.
@@ -47,13 +47,13 @@ static inline bool supports_extension(char ext)
return false;
#else /* !CONFIG_CPU */
-#ifdef CONFIG_RISCV_MMODE
+#if CONFIG_IS_ENABLED(RISCV_MMODE)
return csr_read(misa) & (1 << (ext - 'a'));
-#else /* !CONFIG_RISCV_MMODE */
+#else /* !CONFIG_IS_ENABLED(RISCV_MMODE) */
#warning "There is no way to determine the available extensions in S-mode."
#warning "Please convert your board to use the RISC-V CPU driver."
return false;
-#endif /* CONFIG_RISCV_MMODE */
+#endif /* CONFIG_IS_ENABLED(RISCV_MMODE) */
#endif /* CONFIG_CPU */
}
@@ -8,5 +8,5 @@ config GENERIC_RISCV
imply CPU
imply CPU_RISCV
imply RISCV_TIMER
- imply SIFIVE_CLINT if RISCV_MMODE
+ imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
imply CMD_CPU
@@ -40,7 +40,7 @@ secondary_harts_relocation_error:
.section .text
.globl _start
_start:
-#ifdef CONFIG_RISCV_MMODE
+#if CONFIG_IS_ENABLED(RISCV_MMODE)
csrr a0, mhartid
#endif
@@ -63,7 +63,7 @@ _start:
#ifdef CONFIG_SMP
/* set xSIE bit to receive IPIs */
-#ifdef CONFIG_RISCV_MMODE
+#if CONFIG_IS_ENABLED(RISCV_MMODE)
li t0, MIE_MSIE
#else
li t0, SIE_SSIE
@@ -345,7 +345,7 @@ secondary_hart_loop:
#ifdef CONFIG_SMP
csrr t0, MODE_PREFIX(ip)
-#ifdef CONFIG_RISCV_MMODE
+#if CONFIG_IS_ENABLED(RISCV_MMODE)
andi t0, t0, MIE_MSIE
#else
andi t0, t0, SIE_SSIE
@@ -7,7 +7,7 @@
#ifndef RISCV_CSR_ENCODING_H
#define RISCV_CSR_ENCODING_H
-#ifdef CONFIG_RISCV_SMODE
+#if CONFIG_IS_ENABLED(RISCV_SMODE)
#define MODE_PREFIX(__suffix) s##__suffix
#else
#define MODE_PREFIX(__suffix) m##__suffix
@@ -10,13 +10,16 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o
obj-$(CONFIG_CMD_GO) += boot.o
obj-y += cache.o
-obj-$(CONFIG_RISCV_RDTIME) += rdtime.o
+ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y)
obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint.o
obj-$(CONFIG_ANDES_PLIC) += andes_plic.o
obj-$(CONFIG_ANDES_PLMT) += andes_plmt.o
+else
+obj-$(CONFIG_RISCV_RDTIME) += rdtime.o
+obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
+endif
obj-y += interrupts.o
obj-y += reset.o
-obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
obj-y += setjmp.o
obj-$(CONFIG_SMP) += smp.o
U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> --- arch/riscv/Kconfig | 33 ++++++++++++++++++++++++++----- arch/riscv/cpu/ax25/Kconfig | 6 +++--- arch/riscv/cpu/cpu.c | 6 +++--- arch/riscv/cpu/generic/Kconfig | 2 +- arch/riscv/cpu/start.S | 6 +++--- arch/riscv/include/asm/encoding.h | 2 +- arch/riscv/lib/Makefile | 7 +++++-- 7 files changed, 44 insertions(+), 18 deletions(-)