diff mbox series

[U-Boot,13/16] dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci

Message ID 20190716133803.1174-14-andrei@gherzan.ro
State Superseded
Delegated to: Matthias Brugger
Headers show
Series Raspberry Pi 32/64 support | expand

Commit Message

Andrei Gherzan July 16, 2019, 1:38 p.m. UTC 
From: Andrei Gherzan <andrei@balena.io>

Signed-off-by: Andrei Gherzan <andrei@balena.io>
---
 arch/arm/dts/bcm2838-rpi-4-b.dts | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

Comments

Matthias Brugger July 16, 2019, 2:26 p.m. UTC | #1 
On 16/07/2019 15:38, andrei@gherzan.ro wrote:
> From: Andrei Gherzan <andrei@balena.io>
> 
> Signed-off-by: Andrei Gherzan <andrei@balena.io>

Commit message.
You fix a file that you introduced in this series. Any reason why you don't just
send the file already fixed?

> ---
>  arch/arm/dts/bcm2838-rpi-4-b.dts | 16 ++++++----------
>  1 file changed, 6 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/dts/bcm2838-rpi-4-b.dts b/arch/arm/dts/bcm2838-rpi-4-b.dts
> index 07e9a78e8d..168179c17c 100644
> --- a/arch/arm/dts/bcm2838-rpi-4-b.dts
> +++ b/arch/arm/dts/bcm2838-rpi-4-b.dts
> @@ -30,21 +30,17 @@
>  	status = "okay";
>  };
>  
> -/* SDHCI is used to control the SDIO for wireless */
>  &sdhci {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&emmc_gpio34>;
> -	status = "okay";
> -	bus-width = <4>;
> -	non-removable;
> +	status = "disabled";
>  };
>  
> -/* SDHOST is used to drive the SD card */
>  &sdhost {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&sdhost_gpio48>;
> +	status = "disabled";
> +};
> +
> +&emmc2 {
> +	compatible = "brcm,bcm2835-sdhci";
>  	status = "okay";
> -	bus-width = <4>;
>  };
>  
>  &gpio {
>
diff mbox series

Patch

diff --git a/arch/arm/dts/bcm2838-rpi-4-b.dts b/arch/arm/dts/bcm2838-rpi-4-b.dts
index 07e9a78e8d..168179c17c 100644
--- a/arch/arm/dts/bcm2838-rpi-4-b.dts
+++ b/arch/arm/dts/bcm2838-rpi-4-b.dts
@@ -30,21 +30,17 @@ 
 	status = "okay";
 };
 
-/* SDHCI is used to control the SDIO for wireless */
 &sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
+	status = "disabled";
 };
 
-/* SDHOST is used to drive the SD card */
 &sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
+	status = "disabled";
+};
+
+&emmc2 {
+	compatible = "brcm,bcm2835-sdhci";
 	status = "okay";
-	bus-width = <4>;
 };
 
 &gpio {