Message ID | 20190519121020.13866-6-matwey.kornilov@gmail.com |
---|---|
State | Changes Requested |
Delegated to: | Kever Yang |
Headers | show |
Series | Add initial support for Pine64 Rock64 board | expand |
On 2019-05-19, Matwey V. Kornilov wrote: > The ROCK64 is a credit card size SBC based on Rockchip RK3328 > Quad-Core ARM Cortex A53. > > This series allow building u-boot SPL and u-boot.itb for Rock64 > board. The proprietary TPL is stil required for deploy: > > ./tools/mkimage -n rk3328 -T rksd \ > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img > cat ./spl/u-boot-spl.bin >> idbloader.img > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc Could you add a patch documenting this in doc/README.rockchip or a board-specific README? That would be more useful than having to search the git commit messages or mailing list archives. Tested this patch series against v2019.07-rc2, and I was able to pxe boot fine, but unfortunately was unable to boot from microSD. I presume this is caused by some other change since v2019.07-rc1, since the earlier rock64 patches worked fine with microSD on v2019.07-rc1. Scanning mmc 1:6... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 1953 bytes read in 4 ms (476.6 KiB/s) U-Boot menu 1: Debian GNU/Linux kernel 5.1.0-trunk-arm64 2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target) 3: Debian GNU/Linux kernel 5.0.0-trunk-arm64 4: Debian GNU/Linux kernel 5.0.0-trunk-arm64 (rescue target) 5: Debian GNU/Linux kernel 4.19.0-5-arm64 6: Debian GNU/Linux kernel 4.19.0-5-arm64 (rescue target) Enter choice: 1 1: Debian GNU/Linux kernel 5.1.0-trunk-arm64 Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64 ** fs_devread read error - block Skipping l0 for failure retrieving initrd 2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target) Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64 *** ERROR: Can't read GPT Entries *** GPT: Failed to allocate memory for PTE part_get_info_efi: *** ERROR: Invalid GPT *** *** ERROR: Can't read GPT header *** I enabled CONFIG_CMD_CACHE=y and tried "dcache off" but that didn't appear to help anything. Any other suggestions? live well, vagrant
пн, 20 мая 2019 г. в 20:11, Vagrant Cascadian <vagrant@debian.org>: > > On 2019-05-19, Matwey V. Kornilov wrote: > > The ROCK64 is a credit card size SBC based on Rockchip RK3328 > > Quad-Core ARM Cortex A53. > > > > This series allow building u-boot SPL and u-boot.itb for Rock64 > > board. The proprietary TPL is stil required for deploy: > > > > ./tools/mkimage -n rk3328 -T rksd \ > > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img > > cat ./spl/u-boot-spl.bin >> idbloader.img > > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc > > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc > > Could you add a patch documenting this in doc/README.rockchip or a > board-specific README? That would be more useful than having to search > the git commit messages or mailing list archives. > > > Tested this patch series against v2019.07-rc2, and I was able to pxe > boot fine, but unfortunately was unable to boot from microSD. > > I presume this is caused by some other change since v2019.07-rc1, since > the earlier rock64 patches worked fine with microSD on v2019.07-rc1.\ Thanks for the report. This series is based on 98b3156b0df4 At least bootefi works fine for me. Do v1 patches works for you on v2019.07-rc2? > > Scanning mmc 1:6... > Found /boot/extlinux/extlinux.conf > Retrieving file: /boot/extlinux/extlinux.conf > 1953 bytes read in 4 ms (476.6 KiB/s) > U-Boot menu > 1: Debian GNU/Linux kernel 5.1.0-trunk-arm64 > 2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target) > 3: Debian GNU/Linux kernel 5.0.0-trunk-arm64 > 4: Debian GNU/Linux kernel 5.0.0-trunk-arm64 (rescue target) > 5: Debian GNU/Linux kernel 4.19.0-5-arm64 > 6: Debian GNU/Linux kernel 4.19.0-5-arm64 (rescue target) > Enter choice: 1 > 1: Debian GNU/Linux kernel 5.1.0-trunk-arm64 > Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64 > ** fs_devread read error - block > Skipping l0 for failure retrieving initrd > 2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target) > Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64 > *** ERROR: Can't read GPT Entries *** > GPT: Failed to allocate memory for PTE > part_get_info_efi: *** ERROR: Invalid GPT *** > *** ERROR: Can't read GPT header *** > > I enabled CONFIG_CMD_CACHE=y and tried "dcache off" but that didn't > appear to help anything. Any other suggestions? > > > live well, > vagrant
On 2019-05-20, Matwey V. Kornilov wrote: > пн, 20 мая 2019 г. в 20:11, Vagrant Cascadian <vagrant@debian.org>: >> >> On 2019-05-19, Matwey V. Kornilov wrote: >> > The ROCK64 is a credit card size SBC based on Rockchip RK3328 >> > Quad-Core ARM Cortex A53. >> > >> > This series allow building u-boot SPL and u-boot.itb for Rock64 >> > board. The proprietary TPL is stil required for deploy: >> > >> > ./tools/mkimage -n rk3328 -T rksd \ >> > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img >> > cat ./spl/u-boot-spl.bin >> idbloader.img >> > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc >> > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc >> >> Could you add a patch documenting this in doc/README.rockchip or a >> board-specific README? That would be more useful than having to search >> the git commit messages or mailing list archives. >> >> >> Tested this patch series against v2019.07-rc2, and I was able to pxe >> boot fine, but unfortunately was unable to boot from microSD. >> >> I presume this is caused by some other change since v2019.07-rc1, since >> the earlier rock64 patches worked fine with microSD on v2019.07-rc1.\ > > Thanks for the report. This series is based on 98b3156b0df4 At least > bootefi works fine for me. No obvious relevent changes between 98b3156b0df4 and v2019.07-rc2. I haven't tested with bootefi ... will give that a try too. > Do v1 patches works for you on v2019.07-rc2? With some minor rebasing to apply to -rc2, the v1 patches fail in the same way as the v2 patches on top of v2019.07-rc2. live well, vagrant
пн, 20 мая 2019 г. в 21:15, Vagrant Cascadian <vagrant@debian.org>: > > On 2019-05-20, Matwey V. Kornilov wrote: > > пн, 20 мая 2019 г. в 20:11, Vagrant Cascadian <vagrant@debian.org>: > >> > >> On 2019-05-19, Matwey V. Kornilov wrote: > >> > The ROCK64 is a credit card size SBC based on Rockchip RK3328 > >> > Quad-Core ARM Cortex A53. > >> > > >> > This series allow building u-boot SPL and u-boot.itb for Rock64 > >> > board. The proprietary TPL is stil required for deploy: > >> > > >> > ./tools/mkimage -n rk3328 -T rksd \ > >> > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img > >> > cat ./spl/u-boot-spl.bin >> idbloader.img > >> > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc > >> > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc > >> > >> Could you add a patch documenting this in doc/README.rockchip or a > >> board-specific README? That would be more useful than having to search > >> the git commit messages or mailing list archives. > >> > >> > >> Tested this patch series against v2019.07-rc2, and I was able to pxe > >> boot fine, but unfortunately was unable to boot from microSD. > >> > >> I presume this is caused by some other change since v2019.07-rc1, since > >> the earlier rock64 patches worked fine with microSD on v2019.07-rc1.\ > > > > Thanks for the report. This series is based on 98b3156b0df4 At least > > bootefi works fine for me. > > No obvious relevent changes between 98b3156b0df4 and v2019.07-rc2. > > I haven't tested with bootefi ... will give that a try too. > > > > Do v1 patches works for you on v2019.07-rc2? > > With some minor rebasing to apply to -rc2, the v1 patches fail in the > same way as the v2 patches on top of v2019.07-rc2. Maybe try to rebase? Could you share your OS image? I can not reproduce the issue now :( > > > live well, > vagrant -- With best regards, Matwey V. Kornilov
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote: > The ROCK64 is a credit card size SBC based on Rockchip RK3328 > Quad-Core ARM Cortex A53. > > This series allow building u-boot SPL and u-boot.itb for Rock64 > board. The proprietary TPL is stil required for deploy: > > ./tools/mkimage -n rk3328 -T rksd \ > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img > cat ./spl/u-boot-spl.bin >> idbloader.img > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc > > Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 91 insertions(+) > create mode 100644 configs/rock64-rk3328_defconfig > > diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig > new file mode 100644 > index 0000000000..6529dedfb6 > --- /dev/null > +++ b/configs/rock64-rk3328_defconfig > @@ -0,0 +1,91 @@ > +CONFIG_SMBIOS_MANUFACTURER="pine64" > +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328" > +CONFIG_ARM=y > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x2000 > +CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_ROCKCHIP_RK3328=y > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000 > +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y > +CONFIG_SPL_STACK_R_ADDR=0x600000 > +CONFIG_DEBUG_UART_BASE=0xFF130000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_DEBUG_UART=y > +CONFIG_NR_DRAM_BANKS=1 > +# CONFIG_ANDROID_BOOT_IMAGE is not set > +CONFIG_FIT=y > +CONFIG_FIT_VERBOSE=y > +CONFIG_SPL_LOAD_FIT=y > +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py" > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb" > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_ATF=y > +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y > +CONFIG_FASTBOOT_BUF_ADDR=0x800800 > +CONFIG_FASTBOOT_FLASH=y > +CONFIG_FASTBOOT_FLASH_MMC_DEV=1 > +CONFIG_CMD_BOOTZ=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_USB=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_TIME=y > +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64" > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_REGMAP=y > +CONFIG_SPL_REGMAP=y > +CONFIG_SYSCON=y > +CONFIG_SPL_SYSCON=y > +CONFIG_CLK=y > +CONFIG_SPL_CLK=y > +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_SPI_FLASH=y > +CONFIG_SF_DEFAULT_SPEED=20000000 > +CONFIG_DM_ETH=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_GMAC_ROCKCHIP=y > +CONFIG_PHY=y > +CONFIG_PINCTRL=y > +CONFIG_SPL_PINCTRL=y > +CONFIG_PINCTRL_ROCKCHIP_RK3328=y > +CONFIG_DM_PMIC=y > +CONFIG_PMIC_RK8XX=y > +CONFIG_REGULATOR_PWM=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_REGULATOR_RK8XX=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_RAM=y > +CONFIG_SPL_RAM=y > +CONFIG_DM_RESET=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_SYSRESET=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_OHCI_HCD=y > +CONFIG_USB_OHCI_GENERIC=y > +CONFIG_USB_DWC2=y > +CONFIG_USB_DWC3=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" > +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 > +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a > +CONFIG_USB_GADGET_DWC2_OTG=y > +CONFIG_USE_TINY_PRINTF=y > +CONFIG_SPL_TINY_MEMSET=y > +CONFIG_ERRNO_STR=y
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig new file mode 100644 index 0000000000..6529dedfb6 --- /dev/null +++ b/configs/rock64-rk3328_defconfig @@ -0,0 +1,91 @@ +CONFIG_SMBIOS_MANUFACTURER="pine64" +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328" +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_ROCKCHIP_RK3328=y +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000 +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_DEBUG_UART_BASE=0xFF130000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py" +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=1 +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64" +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PHY=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_ROCKCHIP_RK3328=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_DM_RESET=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC2=y +CONFIG_USB_DWC3=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USE_TINY_PRINTF=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y
The ROCK64 is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53. This series allow building u-boot SPL and u-boot.itb for Rock64 board. The proprietary TPL is stil required for deploy: ./tools/mkimage -n rk3328 -T rksd \ -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img cat ./spl/u-boot-spl.bin >> idbloader.img dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> --- configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 configs/rock64-rk3328_defconfig