diff mbox series

[U-Boot,5/5] rockchip: rk3328: add rock64-rk3328_defconfig

Message ID 20190508063435.3796-6-matwey.kornilov@gmail.com
State Superseded
Delegated to: Philipp Tomsich
Headers show
Series Add initial support for Pine64 Rock64 board. | expand

Commit Message

Matwey V. Kornilov May 8, 2019, 6:34 a.m. UTC 
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
 configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 configs/rock64-rk3328_defconfig

Comments

Vagrant Cascadian May 13, 2019, 4:25 p.m. UTC | #1 
On 2019-05-08, Matwey V. Kornilov wrote:
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> ---
>  configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 91 insertions(+)
>  create mode 100644 configs/rock64-rk3328_defconfig

Thanks for submitting these patches upstream!

Unfortunately, I wasn't able to get this to boot off of microSD.

What process do you use to test this? Does it depend on patches not
present in 2019.07-rc1 or not yet merged?

The process I tried after building upstream arm-trusted-firmware 2.1:

 mkimage -T rksd -n rk3328 -d spl/u-boot-spl.bin u-boot-spl.rksd
    
 dd if=u-boot-spl.rksd of=/dev/sdb seek=64
 dd if=u-boot.itb of=/dev/sdb seek=16384

There was no output on the serial console, either at 1500000 or 115200.


live well,
  vagrant

> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..b278315035
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
Vagrant Cascadian May 13, 2019, 10:59 p.m. UTC | #2 
On 2019-05-13, Vagrant Cascadian wrote:
> On 2019-05-08, Matwey V. Kornilov wrote:
>> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
>> ---
>>  configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 91 insertions(+)
>>  create mode 100644 configs/rock64-rk3328_defconfig
>
> Thanks for submitting these patches upstream!
>
> Unfortunately, I wasn't able to get this to boot off of microSD.
>
> What process do you use to test this? Does it depend on patches not
> present in 2019.07-rc1 or not yet merged?

Downloading the patch series from patchwork didn't include the cover
letter which explains what is needed... I'll test with that now; sorry
for the noise.

Maybe those instructions should be included in doc/README.rockchip ?


live well,
  vagrant
Vagrant Cascadian May 13, 2019, 11:13 p.m. UTC | #3 
On 2019-05-13, Vagrant Cascadian wrote:
> On 2019-05-13, Vagrant Cascadian wrote:
>> On 2019-05-08, Matwey V. Kornilov wrote:
>>> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
>>> ---
>>>  configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
>>>  1 file changed, 91 insertions(+)
>>>  create mode 100644 configs/rock64-rk3328_defconfig
...
> Downloading the patch series from patchwork didn't include the cover
> letter which explains what is needed... I'll test with that now; sorry
> for the noise.
>
> Maybe those instructions should be included in doc/README.rockchip ?

Works for me! Tested booting from microSD and PXE.

Please CC me on updated patch series, if any.

Tested-by: Vagrant Cascadian <vagrant@debian.org>


live well,
  vagrant
Matwey V. Kornilov May 14, 2019, 9:41 a.m. UTC | #4 
вт, 14 мая 2019 г. в 02:13, Vagrant Cascadian <vagrant@debian.org>:
>
> On 2019-05-13, Vagrant Cascadian wrote:
> > On 2019-05-13, Vagrant Cascadian wrote:
> >> On 2019-05-08, Matwey V. Kornilov wrote:
> >>> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> >>> ---
> >>>  configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
> >>>  1 file changed, 91 insertions(+)
> >>>  create mode 100644 configs/rock64-rk3328_defconfig
> ...
> > Downloading the patch series from patchwork didn't include the cover
> > letter which explains what is needed... I'll test with that now; sorry
> > for the noise.
> >
> > Maybe those instructions should be included in doc/README.rockchip ?
>
> Works for me! Tested booting from microSD and PXE.

Nice to hear. Thank you for the work.

>
> Please CC me on updated patch series, if any.
>
> Tested-by: Vagrant Cascadian <vagrant@debian.org>
>
>
> live well,
>   vagrant
Kever Yang May 16, 2019, 7 a.m. UTC | #5 
Hi Matwey,

    Please add commit message for the patch.

On 05/08/2019 02:34 PM, Matwey V. Kornilov wrote:
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> ---
>  configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 91 insertions(+)
>  create mode 100644 configs/rock64-rk3328_defconfig
>
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..b278315035
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
Does this SPL_REVERVE_IRAM=0 fine with support ATF?
SPL TEXT_BASE is 0, and ATF starts at 0x100000, I use to reserve
big enough space for ATF and U-Boot before SPL enable
the relocate feature, or else it's very easy to get panic in SPL.

Thanks,
- Kever
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
Matwey V. Kornilov May 19, 2019, 12:11 p.m. UTC | #6 
Hi Kever,

чт, 16 мая 2019 г. в 10:01, Kever Yang <kever.yang@rock-chips.com>:
>
> Hi Matwey,
>
>     Please add commit message for the patch.
>
> On 05/08/2019 02:34 PM, Matwey V. Kornilov wrote:
> > Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> > ---
> >  configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 91 insertions(+)
> >  create mode 100644 configs/rock64-rk3328_defconfig
> >
> > diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> > new file mode 100644
> > index 0000000000..b278315035
> > --- /dev/null
> > +++ b/configs/rock64-rk3328_defconfig
> > @@ -0,0 +1,91 @@
> > +CONFIG_SMBIOS_MANUFACTURER="pine64"
> > +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_ROCKCHIP=y
> > +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> > +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > +CONFIG_SYS_MALLOC_F_LEN=0x2000
> > +CONFIG_SYS_TEXT_BASE=0x00200000
> > +CONFIG_ROCKCHIP_RK3328=y
> > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
> Does this SPL_REVERVE_IRAM=0 fine with support ATF?
> SPL TEXT_BASE is 0, and ATF starts at 0x100000, I use to reserve
> big enough space for ATF and U-Boot before SPL enable
> the relocate feature, or else it's very easy to get panic in SPL.

I set it to 0x40000 now as in evb-rk3328_defconfig. However It works
for me also with 0x0.


>
> Thanks,
> - Kever
> > +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> > +CONFIG_SPL_STACK_R_ADDR=0x600000
> > +CONFIG_DEBUG_UART_BASE=0xFF130000
> > +CONFIG_DEBUG_UART_CLOCK=24000000
> > +CONFIG_DEBUG_UART=y
> > +CONFIG_NR_DRAM_BANKS=1
> > +# CONFIG_ANDROID_BOOT_IMAGE is not set
> > +CONFIG_FIT=y
> > +CONFIG_FIT_VERBOSE=y
> > +CONFIG_SPL_LOAD_FIT=y
> > +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> > +# CONFIG_DISPLAY_CPUINFO is not set
> > +CONFIG_DISPLAY_BOARDINFO_LATE=y
> > +CONFIG_SPL_STACK_R=y
> > +CONFIG_SPL_ATF=y
> > +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> > +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> > +CONFIG_FASTBOOT_FLASH=y
> > +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> > +CONFIG_CMD_BOOTZ=y
> > +CONFIG_CMD_GPT=y
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_SF=y
> > +CONFIG_CMD_USB=y
> > +# CONFIG_CMD_SETEXPR is not set
> > +CONFIG_CMD_TIME=y
> > +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> > +CONFIG_SPL_OF_CONTROL=y
> > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> > +CONFIG_ENV_IS_IN_MMC=y
> > +CONFIG_NET_RANDOM_ETHADDR=y
> > +CONFIG_REGMAP=y
> > +CONFIG_SPL_REGMAP=y
> > +CONFIG_SYSCON=y
> > +CONFIG_SPL_SYSCON=y
> > +CONFIG_CLK=y
> > +CONFIG_SPL_CLK=y
> > +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> > +CONFIG_ROCKCHIP_GPIO=y
> > +CONFIG_SYS_I2C_ROCKCHIP=y
> > +CONFIG_MMC_DW=y
> > +CONFIG_MMC_DW_ROCKCHIP=y
> > +CONFIG_SPI_FLASH=y
> > +CONFIG_SF_DEFAULT_SPEED=20000000
> > +CONFIG_DM_ETH=y
> > +CONFIG_ETH_DESIGNWARE=y
> > +CONFIG_GMAC_ROCKCHIP=y
> > +CONFIG_PHY=y
> > +CONFIG_PINCTRL=y
> > +CONFIG_SPL_PINCTRL=y
> > +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> > +CONFIG_DM_PMIC=y
> > +CONFIG_PMIC_RK8XX=y
> > +CONFIG_REGULATOR_PWM=y
> > +CONFIG_DM_REGULATOR_FIXED=y
> > +CONFIG_REGULATOR_RK8XX=y
> > +CONFIG_PWM_ROCKCHIP=y
> > +CONFIG_RAM=y
> > +CONFIG_SPL_RAM=y
> > +CONFIG_DM_RESET=y
> > +CONFIG_BAUDRATE=1500000
> > +CONFIG_DEBUG_UART_SHIFT=2
> > +CONFIG_SYSRESET=y
> > +CONFIG_USB=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_DWC3=y
> > +CONFIG_USB_EHCI_HCD=y
> > +CONFIG_USB_EHCI_GENERIC=y
> > +CONFIG_USB_OHCI_HCD=y
> > +CONFIG_USB_OHCI_GENERIC=y
> > +CONFIG_USB_DWC2=y
> > +CONFIG_USB_DWC3=y
> > +CONFIG_USB_GADGET=y
> > +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> > +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> > +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> > +CONFIG_USB_GADGET_DWC2_OTG=y
> > +CONFIG_USE_TINY_PRINTF=y
> > +CONFIG_SPL_TINY_MEMSET=y
> > +CONFIG_ERRNO_STR=y
>
>
>


--
With best regards,
Matwey V. Kornilov
diff mbox series

Patch

diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
new file mode 100644
index 0000000000..b278315035
--- /dev/null
+++ b/configs/rock64-rk3328_defconfig
@@ -0,0 +1,91 @@ 
+CONFIG_SMBIOS_MANUFACTURER="pine64"
+CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RK3328=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y