@@ -641,6 +641,12 @@ config FSL_ESDHC
This selects support for the eSDHC (enhanced secure digital host
controller) found on numerous Freescale/NXP SoCs.
+config FSL_ESDHC_IMX
+ bool "Freescale/NXP i.MX eSDHC controller support"
+ help
+ This selects support for the i.MX eSDHC (enhanced secure digital host
+ controller) found on numerous Freescale/NXP SoCs.
+
endmenu
config SYS_FSL_ERRATUM_ESDHC111
@@ -25,6 +25,7 @@ obj-$(CONFIG_MMC_DW_K3) += hi6220_dw_mmc.o
obj-$(CONFIG_MMC_DW_ROCKCHIP) += rockchip_dw_mmc.o
obj-$(CONFIG_MMC_DW_SOCFPGA) += socfpga_dw_mmc.o
obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
+obj-$(CONFIG_FSL_ESDHC_IMX) += fsl_esdhc_imx.o
obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o
obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
obj-$(CONFIG_MMC_MESON_GX) += meson_gx_mmc.o
similarity index 99%
copy from drivers/mmc/fsl_esdhc.c
copy to drivers/mmc/fsl_esdhc_imx.c
@@ -2,6 +2,7 @@
/*
* Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
* Andy Fleming
+ * Copyright 2019 NXP
*
* Based vaguely on the pxa mmc code:
* (C) Copyright 2003
@@ -18,7 +19,7 @@
#include <part.h>
#include <power/regulator.h>
#include <malloc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
#include <fdt_support.h>
#include <asm/io.h>
#include <dm.h>
@@ -110,7 +111,7 @@ struct esdhc_soc_data {
* @non_removable: 0: removable; 1: non-removable
* @wp_enable: 1: enable checking wp; 0: no check
* @vs18_enable: 1: use 1.8V voltage; 0: use 3.3V
- * @flags: ESDHC_FLAG_xx in include/fsl_esdhc.h
+ * @flags: ESDHC_FLAG_xx in include/fsl_esdhc_imx.h
* @caps: controller capabilities
* @tuning_step: tuning step setting in tuning_ctrl register
* @start_tuning_tap: the start point for tuning in tuning_ctrl register
similarity index 97%
copy from include/fsl_esdhc.h
copy to include/fsl_esdhc_imx.h
@@ -4,10 +4,11 @@
*-------------------------------------------------------------------
*
* Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc
+ * Copyright 2019 NXP
*/
-#ifndef __FSL_ESDHC_H__
-#define __FSL_ESDHC_H__
+#ifndef __FSL_ESDHC_IMX_H__
+#define __FSL_ESDHC_IMX_H__
#include <linux/bitops.h>
#include <linux/errno.h>
@@ -258,15 +259,15 @@ struct fsl_esdhc_cfg {
#error "Endianess is not defined: please fix to continue"
#endif
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
int fsl_esdhc_mmc_init(bd_t *bis);
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg);
void fdt_fixup_esdhc(void *blob, bd_t *bd);
#else
static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {}
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
void __noreturn mmc_boot(void);
void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
-#endif /* __FSL_ESDHC_H__ */
+#endif /* __FSL_ESDHC_IMX_H__ */
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX initially. The later QoriQ series PowerPC processors (which were evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and i.MX series processors were using this driver for their eSDHCs too. For the two series processors, the eSDHCs are becoming more and more different. We should have split it into two drivers, like them (sdhci-of-esdhc.c/sdhci-esdhc-imx.c) in linux kernel. This patch is just to create a fsl_esdhc_imx driver which is a copy of fsl_esdhc driver for i.MX processors. We will convert i.MX processors to use fsl_esdhc_imx, and clean up the two drivers separately in the future patches. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> --- Changes for v2: - None. --- drivers/mmc/Kconfig | 6 ++++++ drivers/mmc/Makefile | 1 + drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} | 5 +++-- include/{fsl_esdhc.h => fsl_esdhc_imx.h} | 11 ++++++----- 4 files changed, 16 insertions(+), 7 deletions(-) copy drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} (99%) copy include/{fsl_esdhc.h => fsl_esdhc_imx.h} (97%)