diff --git a/arch/arm/dts/armada-370-xp.dtsi b/arch/arm/dts/armada-370-xp.dtsi
index 0b2a78d39301..e4c35d4e98f4 100644
--- a/arch/arm/dts/armada-370-xp.dtsi
+++ b/arch/arm/dts/armada-370-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
  *
@@ -8,50 +9,10 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * This file contains the definitions that are common to the Armada
  * 370 and Armada XP SoC.
  */
 
-/include/ "skeleton64.dtsi"
-
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
@@ -86,7 +47,7 @@
 		pcie-mem-aperture = <0xf8000000 0x7e00000>;
 		pcie-io-aperture  = <0xffe00000 0x100000>;
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +57,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +67,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +77,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +87,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -141,34 +102,13 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-			u-boot,dm-pre-reloc;
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <50>;
 			};
 
-			spi0: spi@10600 {
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				#address-cells = <1>;
@@ -235,33 +175,38 @@
 				msi-controller;
 			};
 
-			coherency-fabric@20200 {
+			coherencyfab: coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
 				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
-			timer@20300 {
+			timer: timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				reg = <0x20300 0x34>, <0x20704 0x4>;
 			};
 
-			pmsu@22000 {
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			pmsu: pmsu@22000 {
 				compatible = "marvell,armada-370-pmsu";
 				reg = <0x22000 0x1000>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <45>;
 				status = "disabled";
 			};
 
-			usb@51000 {
+			usb1: usb@51000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x51000 0x500>;
 				interrupts = <46>;
@@ -275,7 +220,7 @@
 				status = "disabled";
 			};
 
-			mdio: mdio {
+			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
@@ -290,7 +235,7 @@
 				status = "disabled";
 			};
 
-			sata@a0000 {
+			sata: sata@a0000 {
 				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <55>;
@@ -309,7 +254,7 @@
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <54>;
@@ -321,6 +266,42 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/dts/armada-xp-gp.dts b/arch/arm/dts/armada-xp-gp.dts
index 27799d1254ea..1139e9469a83 100644
--- a/arch/arm/dts/armada-xp-gp.dts
+++ b/arch/arm/dts/armada-xp-gp.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada XP development board
  * (DB-MV784MP-GP)
@@ -8,44 +9,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default
  * 0xd0000000). The 0xf1000000 is the default used by the recent,
@@ -68,11 +31,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	aliases {
-		spi0 = &spi0;
-	};
-
-	memory {
+	memory@0 {
 		device_type = "memory";
 		/*
                  * 8 GB of plug-in RAM modules by default.The amount
@@ -98,7 +57,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -128,31 +90,9 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The 3 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
-				u-boot,dm-pre-reloc;
 			};
 			serial@12100 {
 				status = "okay";
@@ -177,43 +117,33 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <16>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <17>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <18>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <19>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 
 			/* Front-side USB slot */
@@ -226,27 +156,72 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
+			bm@c0000 {
 				status = "okay";
-				u-boot,dm-pre-reloc;
-
-				spi-flash@0 {
-					u-boot,dm-pre-reloc;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
 			};
 
 			nand@d0000 {
 				status = "okay";
+				label = "pxa3xx_nand-0";
 				num-cs = <1>;
 				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
 	};
 };
diff --git a/arch/arm/dts/armada-xp-maxbcm.dts b/arch/arm/dts/armada-xp-maxbcm.dts
index d7d7f65c85fe..921eb7086254 100644
--- a/arch/arm/dts/armada-xp-maxbcm.dts
+++ b/arch/arm/dts/armada-xp-maxbcm.dts
@@ -225,18 +225,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -247,3 +235,15 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/dts/armada-xp-mv78230.dtsi b/arch/arm/dts/armada-xp-mv78230.dtsi
index f6bab9fb20a9..8558bf6bb54c 100644
--- a/arch/arm/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/dts/armada-xp-mv78230.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -5,44 +6,6 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP MV78230 SoC that are not
  * common to all Armada XP SoCs.
  */
@@ -207,25 +170,33 @@
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <17>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
 			};
 		};
 	};
diff --git a/arch/arm/dts/armada-xp-mv78260.dtsi b/arch/arm/dts/armada-xp-mv78260.dtsi
index d39231f69d9a..2d85fe8ac327 100644
--- a/arch/arm/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/dts/armada-xp-mv78260.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -5,44 +6,6 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP MV78260 SoC that are not
  * common to all Armada XP SoCs.
  */
@@ -294,29 +257,38 @@
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;
diff --git a/arch/arm/dts/armada-xp-mv78460.dtsi b/arch/arm/dts/armada-xp-mv78460.dtsi
index c642565d1bc6..230a3fd36b30 100644
--- a/arch/arm/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/dts/armada-xp-mv78460.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -5,44 +6,6 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP MV78460 SoC that are not
  * common to all Armada XP SoCs.
  */
@@ -333,29 +296,38 @@
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;
diff --git a/arch/arm/dts/armada-xp-synology-ds414.dts b/arch/arm/dts/armada-xp-synology-ds414.dts
index 0a60ddfa4149..861967cd7e87 100644
--- a/arch/arm/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/dts/armada-xp-synology-ds414.dts
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Synology DS414
  *
  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the old 0xd0000000).
  * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
@@ -42,36 +38,16 @@
 		spi0 = &spi0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * Connected to Marvell 88SX7042 SATA-II controller
-			 * handling the four disks.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/*
-			 * Connected to EtronTech EJ168A XHCI controller
-			 * providing the two rear USB 3.0 ports.
-			 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 
@@ -80,64 +56,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-				u-boot,dm-pre-reloc;
-
-				spi-flash@0 {
-					u-boot,dm-pre-reloc;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000d0000>; /* 832KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000d0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@003a0000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x003a0000 0x00430000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -179,16 +97,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1512 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				pinctrl-0 = <&ge0_rgmii_pins>;
@@ -215,7 +123,7 @@
 			     &sata3_pwr_pin &sata4_pwr_pin>;
 		pinctrl-names = "default";
 
-		sata1_regulator: sata1-regulator {
+		sata1_regulator: sata1-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "SATA1 Power";
@@ -228,7 +136,7 @@
 			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata2_regulator: sata2-regulator {
+		sata2_regulator: sata2-regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "SATA2 Power";
@@ -241,7 +149,7 @@
 			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata3_regulator: sata3-regulator {
+		sata3_regulator: sata3-regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "SATA3 Power";
@@ -254,7 +162,7 @@
 			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata4_regulator: sata4-regulator {
+		sata4_regulator: sata4-regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
 			regulator-name = "SATA4 Power";
@@ -269,6 +177,39 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	sata1_pwr_pin: sata1-pwr-pin {
 		marvell,pins = "mpp42";
@@ -335,3 +276,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@3a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/dts/armada-xp-theadorable.dts b/arch/arm/dts/armada-xp-theadorable.dts
index 5695e9b75856..bcb4bfdd5c19 100644
--- a/arch/arm/dts/armada-xp-theadorable.dts
+++ b/arch/arm/dts/armada-xp-theadorable.dts
@@ -126,40 +126,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-				u-boot,dm-pre-reloc;
-
-				spi-flash@0 {
-					u-boot,dm-pre-reloc;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor", "spi-flash";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <27777777>;
-				};
-
-				fpga@1 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "spi-generic-device";
-					reg = <1>; /* Chip select 1 */
-					spi-max-frequency = <27777777>;
-				};
-			};
-
-			spi1: spi@10680 {
-				status = "okay";
-
-				fpga@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "spi-generic-device";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <27777777>;
-				};
-			};
-
 			/* The LCD controller is only used on this board */
 			lcd0: lcd-controller@e0000 {
 				compatible = "marvell,armada-xp-lcd";
@@ -188,6 +154,41 @@
 	};
 };
 
+&spi0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor", "spi-flash";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <27777777>;
+	};
+
+	fpga@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-generic-device";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <27777777>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	fpga@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-generic-device";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <27777777>;
+	};
+};
+
+
 &pciec {
 	status = "okay";
 
diff --git a/arch/arm/dts/armada-xp.dtsi b/arch/arm/dts/armada-xp.dtsi
index 3fac39e41d78..d856d9602272 100644
--- a/arch/arm/dts/armada-xp.dtsi
+++ b/arch/arm/dts/armada-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -8,44 +9,6 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP SoC that are not
  * common to all Armada SoCs.
  */
@@ -53,6 +16,9 @@
 #include "armada-370-xp.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
@@ -71,12 +37,12 @@
 		};
 
 		internal-regs {
-			sdramc@1400 {
+			sdramc: sdramc@1400 {
 				compatible = "marvell,armada-xp-sdram-controller";
 				reg = <0x1400 0x500>;
 			};
 
-			L2: l2-cache {
+			L2: l2-cache@8000 {
 				compatible = "marvell,aurora-system-cache";
 				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
@@ -85,29 +51,6 @@
 				wt-override;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-			};
-
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
 			uart2: serial@12200 {
 				compatible = "snps,dw-apb-uart";
 				pinctrl-0 = <&uart2_pins>;
@@ -132,7 +75,7 @@
 				status = "disabled";
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x500>;
 			};
@@ -150,7 +93,7 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@182b0 {
+			thermal: thermal@182b0 {
 				compatible = "marvell,armadaxp-thermal";
 				reg = <0x182b0 0x4
 					0x184d0 0x4>;
@@ -164,25 +107,9 @@
 				clocks = <&coreclk 1>;
 			};
 
-			interrupt-controller@20a00 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-xp-wdt";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x20>;
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
 			};
 
 			eth2: ethernet@30000 {
@@ -193,15 +120,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
+			usb2: usb@52000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x52000 0x500>;
 				interrupts = <47>;
@@ -209,7 +128,7 @@
 				status = "disabled";
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -237,7 +156,27 @@
 				compatible = "marvell,armada-xp-neta";
 			};
 
-			xor@f0900 {
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-xp-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>, <49>;
+				clocks = <&gateclk 23>, <&gateclk 23>;
+				clock-names = "cesa0", "cesa1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			xor0: xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
 				       0xF0B00 0x100>;
@@ -257,6 +196,35 @@
 				};
 			};
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {
@@ -269,6 +237,44 @@
 	};
 };
 
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
 &pinctrl {
 	ge0_gmii_pins: ge0-gmii-pins {
 		marvell,pins =
@@ -309,6 +315,12 @@
 		marvell,function = "spi0";
 	};
 
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
 	uart2_pins: uart2-pins {
 		marvell,pins = "mpp42", "mpp43";
 		marvell,function = "uart2";
@@ -319,3 +331,15 @@
 		marvell,function = "uart3";
 	};
 };
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
