diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index dda4e594914b..9b9a35b44a75 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -109,7 +109,9 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-xp-maxbcm.dtb			\
 	armada-xp-synology-ds414.dtb		\
 	armada-xp-theadorable.dtb		\
-	armada-38x-controlcenterdc.dtb
+	armada-38x-controlcenterdc.dtb		\
+	armada-385-atl-x530.dtb			\
+	armada-385-atl-x530DP.dtb
 
 dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
 	uniphier-ld11-global.dtb \
diff --git a/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi b/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi
new file mode 100644
index 000000000000..7074a73537fa
--- /dev/null
+++ b/arch/arm/dts/armada-385-atl-x530-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&spi1 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/armada-385-atl-x530.dts b/arch/arm/dts/armada-385-atl-x530.dts
new file mode 100644
index 000000000000..0ebaa8bb344c
--- /dev/null
+++ b/arch/arm/dts/armada-385-atl-x530.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "armada-385-atl-x530.dtsi"
+#include "armada-385-atl-x530-u-boot.dtsi"
+
+/ {
+	model = "Allied Telesis x530";
+	compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	nand-protect {
+		compatible = "atl,nand-protect";
+		protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb-enable {
+		compatible = "atl,usb-enable";
+		enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	boot-board {
+		compatible = "atl,boot-board";
+		present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy-reset {
+		compatible = "atl,phy-reset";
+		reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-enable {
+		compatible = "atl,led-enable";
+		enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	led_7seg {
+		compatible = "atl,of-led-7seg";
+		segment-gpios = <
+			&led_7seg_gpio 0 0
+			&led_7seg_gpio 1 0
+			&led_7seg_gpio 2 0
+			&led_7seg_gpio 3 0
+			&led_7seg_gpio 4 0
+			&led_7seg_gpio 5 0
+			&led_7seg_gpio 6 0
+			&led_7seg_gpio 7 0>;
+	};
+};
diff --git a/arch/arm/dts/armada-385-atl-x530.dtsi b/arch/arm/dts/armada-385-atl-x530.dtsi
new file mode 100644
index 000000000000..09a04bdcca13
--- /dev/null
+++ b/arch/arm/dts/armada-385-atl-x530.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Allied Telesis x530";
+	compatible = "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi1 = &spi1;
+		i2c0 = &i2c0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		pcie-mem-aperture = <0xa0000000 0x40000000>;
+	};
+
+	eco-button-interrupt {
+		compatible = "atl,eco-button-interrupt";
+		eco-button-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+	};
+
+	board-reset {
+		compatible = "atl,phy_reset";
+		/* Physical board layout of reset pin is active-low but for the
+		 * current driver we have to set it to active-high here.
+		 */
+		phy-reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+				 <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy-int {
+		compatible = "linux,uio-pdrv-genirq";
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_EDGE_BOTH>;
+	};
+
+	led-enable {
+		compatible = "atl,led-enable";
+		led-enable-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	};
+
+	led_7seg {
+		compatible = "atl,of-led-7seg";
+		segment-gpios = <
+			&led_7seg_gpio 0 0
+			&led_7seg_gpio 1 0
+			&led_7seg_gpio 2 0
+			&led_7seg_gpio 3 0
+			&led_7seg_gpio 4 0
+			&led_7seg_gpio 5 0
+			&led_7seg_gpio 6 0
+			&led_7seg_gpio 7 0>;
+	};
+
+	poe {
+		compatible = "atl,periph-poe";
+		poe-reset-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_BOTH>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&devbus_cs1 {
+	compatible = "marvell,mvebu-devbus";
+	status = "okay";
+
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+
+	nvs@0 {
+		status = "okay";
+
+		compatible = "mtd-ram";
+		reg = <0 0x00080000>;
+		bank-width = <1>;
+		label = "nvs";
+	};
+};
+
+&gpio0 {
+	poe-disable {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "poe-disable";
+	};
+};
+
+&gpio1 {
+	poe-mezz-reset {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "poe-mezz-reset";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 { /* POE devices MUX */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			rng@3b {
+				compatible = "maxim,ds2476";
+				reg = <0x3b>;
+			};
+
+			hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			hwmon@2d {
+				compatible = "adi,adt7476";
+				reg = <0x2d>;
+			};
+
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			rtc@68 {
+				compatible = "dallas,ds1340";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			led_7seg_gpio: gpio@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+
+			sfpgpio: gpio@27 { /* I2C to GPIO */
+				compatible = "nxp,pca9555";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x27>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			sfpmux: mux@77 { /* SFP I2C MUX */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,pca9544";
+				reg = <0x77>;
+				i2c-mux-idle-disconnect;
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00e80000>;
+			label = "unused";
+		};
+		partition@idprom {
+			reg = <0x00fc0000 0x00040000>;
+			label = "idprom";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <25000000>;
+};
+
+&nand_controller { /* 256 MB */
+	status = "okay";
+	num-cs = <1>;
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	marvell,nand-enable-arbiter;
+	nand-on-flash-bbt;
+};
diff --git a/arch/arm/dts/armada-385-atl-x530DP.dts b/arch/arm/dts/armada-385-atl-x530DP.dts
new file mode 100644
index 000000000000..2d38bf50b986
--- /dev/null
+++ b/arch/arm/dts/armada-385-atl-x530DP.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "armada-385-atl-x530.dtsi"
+#include "armada-385-atl-x530-u-boot.dtsi"
+#include "armada-385-atl-x530DP.dtsi"
+
+/ {
+	model = "Allied Telesis x530DP";
+	compatible = "alliedtelesis,x530DP", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	nand-protect {
+		compatible = "atl,nand-protect";
+		protect-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb-enable {
+		compatible = "atl,usb-enable";
+		enable-gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	boot-board {
+		compatible = "atl,boot-board";
+		present-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		override-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	phy-reset {
+		compatible = "atl,phy-reset";
+		reset-gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-enable {
+		compatible = "atl,led-enable";
+		enable-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	led_7seg {
+		compatible = "atl,of-led-7seg";
+		segment-gpios = <
+			&led_7seg_gpio 0 0
+			&led_7seg_gpio 1 0
+			&led_7seg_gpio 2 0
+			&led_7seg_gpio 3 0
+			&led_7seg_gpio 4 0
+			&led_7seg_gpio 5 0
+			&led_7seg_gpio 6 0
+			&led_7seg_gpio 7 0>;
+	};
+};
diff --git a/arch/arm/dts/armada-385-atl-x530DP.dtsi b/arch/arm/dts/armada-385-atl-x530DP.dtsi
new file mode 100644
index 000000000000..977eb4ee54fe
--- /dev/null
+++ b/arch/arm/dts/armada-385-atl-x530DP.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&i2c0 {
+	mux@71 {
+		compatible = "nxp,pca9548";
+
+		i2c@1 {
+			hwmon@2c {
+				compatible = "ti,lm87";
+				reg = <0x2c>;
+			};
+
+			hwmon@2d {
+				compatible = "ti,lm87";
+				reg = <0x2d>;
+			};
+
+			hwmon@2e {
+				pwm-polarity = <1>;
+			};
+		};
+
+		psu_a_adapter: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		psu_b_adapter: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			misc_gpio: gpio@26 {
+				compatible = "nxp,pca9555";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x26>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+				status = "okay";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				psu_bank2 {
+					gpio-hog;
+					gpios = <0 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "psu-bank2";
+				};
+			};
+		};
+	};
+};
+
+/ {
+	psu_slot_a {
+		compatible = "atl,dts-overlay-gpio-psu-slot";
+		slot-name = "PSU Bay A";
+		board-index = <1>;
+		present-gpio = <&misc_gpio 1 GPIO_ACTIVE_LOW>;
+		output-ok-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&misc_gpio>;
+		interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
+		overlay = <&psu_a_overlay>;
+	};
+
+	psu_slot_b {
+		compatible = "atl,dts-overlay-gpio-psu-slot";
+		slot-name = "PSU Bay B";
+		board-index = <2>;
+		present-gpio = <&misc_gpio 2 GPIO_ACTIVE_LOW>;
+		output-ok-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&misc_gpio>;
+		interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+		overlay = <&psu_b_overlay>;
+	};
+
+	fan_slot_a {
+		compatible = "atl,fan05-slot";
+		slot-name = "Fan Bay A";
+		board-index = <3>;
+		present-gpio = <&misc_gpio 3 GPIO_ACTIVE_LOW>;
+		fault-gpio = <&misc_gpio 11 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&misc_gpio>;
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		overlay = <&fan_a_overlay>;
+	};
+};
+
+/ {
+	psu_a_overlay: psu_a {
+		fragment@0 {
+			target = <&psu_a_adapter>;
+			__overlay__ {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				psu@51 {
+					compatible = "atl,atl-pwr-gen2";
+					reg = <0x51>;
+					board-index = <1>;
+				};
+			};
+		};
+	};
+};
+
+/ {
+	psu_b_overlay: psu_b {
+		fragment@0 {
+			target = <&psu_b_adapter>;
+			__overlay__ {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				psu@51 {
+					compatible = "atl,atl-pwr-gen2";
+					reg = <0x51>;
+					board-index = <2>;
+				};
+			};
+		};
+	};
+};
+
+/ {
+	fan_a_overlay:fan_a {
+		fragment@1 {
+			target-path = "/";
+			__overlay__ {
+				fan@1 {
+					compatible = "atl,fan05";
+					board-index = <3>;
+					module-id-gpios =
+						<&misc_gpio 4 GPIO_ACTIVE_HIGH>,
+						<&misc_gpio 5 GPIO_ACTIVE_HIGH>,
+						<&misc_gpio 6 GPIO_ACTIVE_HIGH>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index d1f71338ac2a..7dda04e0e34e 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -132,6 +132,10 @@ config TARGET_CONTROLCENTERDC
 	bool "Support CONTROLCENTERDC"
 	select 88F6820
 
+config TARGET_X530
+	bool "Support Allied Telesis x530"
+	select 88F6820
+
 endchoice
 
 config SYS_BOARD
@@ -149,6 +153,7 @@ config SYS_BOARD
 	default "maxbcm" if TARGET_MAXBCM
 	default "theadorable" if TARGET_THEADORABLE
 	default "a38x" if TARGET_CONTROLCENTERDC
+	default "x530" if TARGET_X530
 
 config SYS_CONFIG_NAME
 	default "clearfog" if TARGET_CLEARFOG
@@ -165,6 +170,7 @@ config SYS_CONFIG_NAME
 	default "turris_omnia" if TARGET_TURRIS_OMNIA
 	default "turris_mox" if TARGET_TURRIS_MOX
 	default "controlcenterdc" if TARGET_CONTROLCENTERDC
+	default "x530" if TARGET_X530
 
 config SYS_VENDOR
 	default "Marvell" if TARGET_DB_MV784MP_GP
@@ -179,6 +185,7 @@ config SYS_VENDOR
 	default "CZ.NIC" if TARGET_TURRIS_OMNIA
 	default "CZ.NIC" if TARGET_TURRIS_MOX
 	default "gdsys" if TARGET_CONTROLCENTERDC
+	default "alliedtelesis" if TARGET_X530
 
 config SYS_SOC
 	default "mvebu"
diff --git a/board/alliedtelesis/common/gpio_hog.c b/board/alliedtelesis/common/gpio_hog.c
new file mode 100644
index 000000000000..1f87b3ac1b72
--- /dev/null
+++ b/board/alliedtelesis/common/gpio_hog.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Allied Telesis Labs
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int gpio_hog_list(struct gpio_desc *gpiod, int max_count,
+		  const char *node_name, const char *gpio_name, int value)
+{
+	int node;
+	int count;
+	int i;
+
+	node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, node_name);
+	if (node < 0)
+		return -ENODEV;
+
+	if (!dm_gpio_is_valid(gpiod)) {
+		count =
+		    gpio_request_list_by_name_nodev(offset_to_ofnode(node),
+						    gpio_name, gpiod, max_count,
+						    GPIOD_IS_OUT);
+		if (count < 0)
+			return count;
+
+		for (i = 0; i < count; i++)
+			dm_gpio_set_value(&gpiod[i], value);
+	}
+
+	return 0;
+}
diff --git a/board/alliedtelesis/common/gpio_hog.h b/board/alliedtelesis/common/gpio_hog.h
new file mode 100644
index 000000000000..edb744313186
--- /dev/null
+++ b/board/alliedtelesis/common/gpio_hog.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+int gpio_hog_list(struct gpio_desc *gpiod, int max_count, const char *node_name,
+		  const char *gpio_name, int value);
+
+static inline int gpio_hog(struct gpio_desc *gpiod, const char *node_name,
+			   const char *gpio_name, int value)
+{
+	return gpio_hog_list(gpiod, 1, node_name, gpio_name, value);
+}
diff --git a/board/alliedtelesis/x530/MAINTAINERS b/board/alliedtelesis/x530/MAINTAINERS
new file mode 100644
index 000000000000..8d2d7271b92c
--- /dev/null
+++ b/board/alliedtelesis/x530/MAINTAINERS
@@ -0,0 +1,12 @@
+x530 BOARD
+M:	Chris Packham <chris.packham@alliedtelesis.co.nz>
+S:	Maintained
+F:	board/alliedtelesis/x530/
+F:	board/alliedtelesis/common/gpio_hog.c
+F:	board/alliedtelesis/common/gpio_hog.h
+F:	arch/arm/dts/armada-385-atl-x530.dts
+F:	arch/arm/dts/armada-385-atl-x530.dtsi
+F:	arch/arm/dts/armada-385-atl-x530DP.dts
+F:	arch/arm/dts/armada-385-atl-x530DP.dtsi
+F:	include/configs/x530.h
+F:	configs/x530_defconfig
diff --git a/board/alliedtelesis/x530/Makefile b/board/alliedtelesis/x530/Makefile
new file mode 100644
index 000000000000..97de1d463fe8
--- /dev/null
+++ b/board/alliedtelesis/x530/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Copyright (C) 2017 Allied Telesis Labs
+#
+
+obj-y	:= $(BOARD).o
+ifndef CONFIG_SPL_BUILD
+obj-y	+= ../common/gpio_hog.o
+endif
diff --git a/board/alliedtelesis/x530/kwbimage.cfg b/board/alliedtelesis/x530/kwbimage.cfg
new file mode 100644
index 000000000000..f58d388825e7
--- /dev/null
+++ b/board/alliedtelesis/x530/kwbimage.cfg
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2017 Allied Telesis Labs
+#
+
+# Armada XP uses version 1 image format
+VERSION		1
+
+# Boot Media configurations
+BOOT_FROM	spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068
diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c
new file mode 100644
index 000000000000..b34ae5134547
--- /dev/null
+++ b/board/alliedtelesis/x530/x530.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <i2c.h>
+#include <asm/gpio.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include "../common/gpio_hog.h"
+
+#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
+#include <../serdes/a38x/high_speed_env_spec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MVEBU_DEV_BUS_BASE		(MVEBU_REGISTER(0x10400))
+
+#define CONFIG_NVS_LOCATION		0xf4800000
+#define CONFIG_NVS_SIZE			(512 << 10)
+
+static struct serdes_map board_serdes_map[] = {
+	{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+	{DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+	{DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
+{
+	*serdes_map_array = board_serdes_map;
+	*count = ARRAY_SIZE(board_serdes_map);
+	return 0;
+}
+
+/*
+ * Define the DDR layout / topology here in the board file. This will
+ * be used by the DDR3 init code in the SPL U-Boot version to configure
+ * the DDR3 controller.
+ */
+static struct mv_ddr_topology_map board_topology_map = {
+	DEBUG_LEVEL_ERROR,
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
+	{ { { {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0} },
+	    SPEED_BIN_DDR_1866M,	/* speed_bin */
+	    MV_DDR_DEV_WIDTH_16BIT,	/* sdram device width */
+	    MV_DDR_DIE_CAP_4GBIT,	/* die capacity */
+	    MV_DDR_FREQ_933,		/* frequency */
+	    0, 0,			/* cas_l cas_wl */
+	    MV_DDR_TEMP_LOW,		/* temperature */
+	    MV_DDR_TIM_2T} },		/* timing */
+	BUS_MASK_32BIT_ECC,		/* subphys mask */
+	MV_DDR_CFG_DEFAULT,		/* ddr configuration data source */
+	{ {0} },			/* raw spd data */
+	{0}				/* timing parameters */
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &board_topology_map;
+}
+
+int board_early_init_f(void)
+{
+	/* Configure MPP */
+	writel(0x00001111, MVEBU_MPP_BASE + 0x00);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x04);
+	writel(0x55000000, MVEBU_MPP_BASE + 0x08);
+	writel(0x55550550, MVEBU_MPP_BASE + 0x0c);
+	writel(0x55555555, MVEBU_MPP_BASE + 0x10);
+	writel(0x00100565, MVEBU_MPP_BASE + 0x14);
+	writel(0x40000000, MVEBU_MPP_BASE + 0x18);
+	writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+	/* window for NVS */
+	mbus_dt_setup_win(&mbus_state, CONFIG_NVS_LOCATION, CONFIG_NVS_SIZE,
+			  CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS1);
+
+	/* DEV_READYn is not needed for NVS, ignore it when accessing CS1 */
+	writel(0x00004001, MVEBU_DEV_BUS_BASE + 0xc8);
+
+	return 0;
+}
+
+static int led_7seg_init(unsigned int segments)
+{
+	int node;
+	int ret;
+	int i;
+	struct gpio_desc desc[8];
+
+	node = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
+					     "atl,of-led-7seg");
+	if (node < 0)
+		return -ENODEV;
+
+	ret = gpio_request_list_by_name_nodev(offset_to_ofnode(node),
+					      "segment-gpios", desc,
+					      ARRAY_SIZE(desc), GPIOD_IS_OUT);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(desc); i++) {
+		ret = dm_gpio_set_value(&desc[i], !(segments & BIT(i)));
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	static struct gpio_desc usb_en = {}, nand_wp = {}, phy_reset[2] = {},
+				led_en = {};
+
+	gpio_hog(&usb_en, "atl,usb-enable", "enable-gpio", 1);
+	gpio_hog(&nand_wp, "atl,nand-protect", "protect-gpio", 1);
+	gpio_hog_list(phy_reset, ARRAY_SIZE(phy_reset), "atl,phy-reset", "reset-gpio", 0);
+	gpio_hog(&led_en, "atl,led-enable", "enable-gpio", 1);
+
+#ifdef MTDPARTS_MTDOOPS
+	env_set("mtdoops", MTDPARTS_MTDOOPS);
+#endif
+
+	led_7seg_init(0xff);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board: " CONFIG_SYS_BOARD "\n");
+
+	return 0;
+}
+#endif
diff --git a/configs/x530_defconfig b/configs/x530_defconfig
new file mode 100644
index 000000000000..22482f8d39be
--- /dev/null
+++ b/configs/x530_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_X530=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0xd0012000
+CONFIG_DEBUG_UART_CLOCK=250000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SILENT_CONSOLE=y
+CONFIG_SILENT_U_BOOT_ONLY=y
+CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC=y
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-385-atl-x530"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_BLK=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+# CONFIG_MMC is not set
+CONFIG_NAND=y
+CONFIG_NAND_PXA3XX=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_MTD_UBI=y
+CONFIG_PCI=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
diff --git a/include/configs/x530.h b/include/configs/x530.h
new file mode 100644
index 000000000000..a1ef301d35e0
--- /dev/null
+++ b/include/configs/x530.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Allied Telesis Labs
+ */
+
+#ifndef _CONFIG_X530_H
+#define _CONFIG_X530_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#if !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
+#endif
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_CMD_PCI
+
+/* NAND */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+#define BBT_CUSTOM_SCAN
+#define BBT_CUSTOM_SCAN_PAGE 0
+#define BBT_CUSTOM_SCAN_POSITION 2048
+
+/* SPI NOR flash default params, used by sf commands */
+#define CONFIG_SF_DEFAULT_BUS		1
+#define CONFIG_SF_DEFAULT_SPEED		50000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
+
+#define MTDIDS_DEFAULT			"nand0=nand"
+#define MTDPARTS_DEFAULT		"mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)"
+#define MTDPARTS_MTDOOPS		"errlog"
+
+/* Partition support */
+
+/* Additional FS support/configuration */
+
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
+#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
+#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
+#define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET
+
+#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
+#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
+
+/* PCIe support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI_MVEBU
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+/* NAND */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_SYS_MALLOC_LEN		(4 << 20)
+
+#include <asm/arch/config.h>
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+
+#define CONFIG_SYS_ALT_MEMTEST
+
+/* Keep device tree and initrd in low memory so the kernel can access them */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"fdt_high=0x10000000\0"		\
+	"initrd_high=0x10000000\0"
+
+#define CONFIG_SYS_LOAD_ADDR	0x1000000
+#define CONFIG_UBI_PART			user
+#define CONFIG_UBIFS_VOLUME		user
+
+/* SPL */
+
+/* Defines for SPL */
+#define CONFIG_SPL_SIZE			(140 << 10)
+#define CONFIG_SPL_TEXT_BASE		0x40000030
+#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
+
+#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
+
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
+#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
+
+#endif /* _CONFIG_X530_H */
