diff mbox series

[U-Boot,v4,04/10] arm: mvebu: dts: Fix Turris Mox device tree

Message ID 20181217151010.24024-5-marek.behun@nic.cz
State Awaiting Upstream
Delegated to: Stefan Roese
Headers show
Series Changes for Turris Mox | expand

Commit Message

Marek Behún Dec. 17, 2018, 3:10 p.m. UTC 
DTC issues a warning because #address-cells and #size-cells properties
are not set in the mdio node.
Also add ethernet1 alias.
Also add RTC node.
Also fix USB3 regulator startup delay time.
Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the
speed value is not used byt the comphy driver for PCI Express, but
should be 5 GHz nonetheless).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
---
 arch/arm/dts/armada-3720-turris-mox.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index ff54ce5d0f..14bec0977e 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -24,6 +24,7 @@ 
 
 	aliases {
 		ethernet0 = &eth0;
+		ethernet1 = &eth1;
 		i2c0 = &i2c0;
 		spi0 = &spi0;
 	};
@@ -38,12 +39,16 @@ 
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
 		shutdown-delay-us = <1000000>;
 		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
 		regulator-boot-on;
 	};
 
 	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		eth_phy1: ethernet-phy@1 {
 			reg = <1>;
 		};
@@ -59,7 +64,7 @@ 
 
 	phy1 {
 		phy-type = <PHY_TYPE_PEX0>;
-		phy-speed = <PHY_SPEED_2_5G>;
+		phy-speed = <PHY_SPEED_5G>;
 	};
 
 	phy2 {
@@ -80,6 +85,11 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
+
+	rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+	};
 };
 
 &sdhci1 {